AVS 66 Thursday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Thursday, October 24, 2019
8:00 AM 9:00 AM 10:00 AM 11:00 AM 12:00 PM
2D+
Interfacial Engineering of Chemically Reactive Two-Dimensional Materials
Effects of Mn Doping on the Surface Electronic Band Structure and Bulk Magnetic Properties of ZnS and CdS Quantum Dot Thin Films
Interaction of Molecular O2 with Organolead Halide Nanorods by Single-Particle Fluorescence Microscopy
Complementary Growth of 2D Transition Metal Dichalcogenide Semiconductors on Metal Oxide Interfaces
Kagome-type Lattice Instability and Insulator-metal Transition in an Alkali-doped Mott Insulator on Si(111)
BREAK - Complimentary Coffee in Exhibit Hall
Chemical Migration and Dipole Formation at TMD/TI Interfaces
Atomically Resolved Electronic Properties of Defects in the in-plane Anisotropic Lattice of ReS2
Charge Diminishing at the Si-SiO2 System and its Influence on the Interface Properties
Size-independent “Squeezed” Shape of Metal Clusters Embedded Beneath Layered Materials
AP+
A Challenge for Selective Atomic Layer Etching of Non-volatile Materials Using Organometalic Complex
Characterization of Isotropic Thermal ALE of Oxide Films and Nanometer-Size Structures
Advanced Selective Chemical Dry Etch for Oxide and Si-based Material
Mechanisms of Thermal Atomic Layer Etching (ALE) of Metal by Deprotonation and Complex Formation of Hexafluoroacetylacetone (hfacH)
Thermal Atomic Layer Etching of Amorphous and Crystalline Al2O3 Films
BREAK - Complimentary Coffee in Exhibit Hall
Thermal Atomic Layer Etching (ALE) of Germanium-Rich SiGe Films
Thermal Atomic Layer Etching of GaN and Ga2O3 Using Sequential Fluorination and Ligand-Exchange Reactions
Mechanistic Insights into Thermal Dry Atomic Layer Processing of Metals
AS-ThM
What Really Lies Beneath the AVS Surface? Depth Profiling Can Help Provide the Answer
TOF-SIMS Tandem MS Imaging of (Sub-)Monolayer Coatings for Device Processing
TOF-SIMS at the Edge
Variation of SIMS Secondary Ion Yield of Si and Mg Dopants in GaN Grown by MOCVD
Impact of the Molecular Weight on the Depth Profiling of Polymer Thin Films using Low Energy Cs+ Sputtering
BREAK - Complimentary Coffee in Exhibit Hall
Probing the Surface Structure of Au-Pt Core-Shell Nanoparticles
Correlating Multiple Data Streams for Valence State Identification in Transition Metal Oxide during XPS Depth Profiling
Using Atom Probe Tomography for Three-dimensional Visualization of Sb Segregation in InAs/InAsSb Superlattices
Multi-technique Surface Analysis of Graphenes
CA+
From Surfaces to Solid-Gas and Solid-liquid Interfaces: Ambient Pressure XPS and Beyond
Probing Solid-liquid Interfaces with Tender X-rays
X-ray Photoelectron Spectroscopy Insight into X-ray Induced Radiolysis at Heterogenous Liquid Electrolyte Interface
Theoretical Investigation of Reactivity at Complex Solid-Liquid Interfaces
BREAK - Complimentary Coffee in Exhibit Hall
In-situ/Operando Soft X-ray Spectroscopy for Interfacial Characterization of Energy Materials and Devices
The Importance of Amino Acid Adsorption on Polymer Surfaces in P. Aeruginosa Biofilm Formation
DM+
Extremely Thin Protective Oxide Layer for Reflective Silver Thin Films
Influence of the Electric Double Layer on Degradation of Materials
Key Issues for the Stability of Protective Surface Oxides
Controlling and Observing Localized Dealloying Corrosion and Dissolution via Lateral Modification of Surfactant Inhibitor Layers
In Situ Characterization of Interactions at Polymer/Metal Oxide Interfaces Under Aqueous Conditions by a Spectro-electrochemical Approach
BREAK - Complimentary Coffee in Exhibit Hall
Design of Corrosion Resistant High Entropy Alloys
Determination of Hydrogen in High Strength Steels using Scanning Kelvin Probe Force Microscopy
Reflection Mode Interferometry for studying interfacial processes
EM+
High-density Plasma for Soft Etching of Noble Metals
Crystalline InP Growth and Device Fabrication Directly on Amorphous Dielectrics at Temperatures below 400oC for Future 3D Integrated Circuits
The Role and Requirements of Selective Deposition in Advanced Patterning
Graphene-Template Assisted Selective Epitaxy (G-TASE) of Group IV Semiconductors
Resistivity and Surface Scattering Specularity at (0001) Ru/dielectric Interfaces
BREAK - Complimentary Coffee in Exhibit Hall
Electrochemical Atomic Layer Deposition and Etching of Metals for Atomically-Precise Fabrication of Semiconductor Interconnects
Mechanical Properties of Patterned low-κ Films Measured by Brillouin Light Scattering
Wafer-Scale Fabrication of Carbon-Based Electronic Devices
HC+
Low-temperature Investigation of Propylene on TiO2/Au(111)
Structure and Reactivity of Supported Oxide and Metal Nanoparticles
Catalysis by Well-defined Oxide Nanostructures: From Atomic-scale Properties to Rational Design
Structural and Chemical Effects of Cesium on the Cu(111) and CuxO/Cu(111) Surface
BREAK - Complimentary Coffee in Exhibit Hall
Mythbusting: From Single Crystals in UHV to Catalytic Reactors
Cooperativity Between Pd and AgOx Phases on Ag(111)
Migration Across Metal/Metal Oxide Interfaces: Enhancing the Reactivity of Ag Oxide with H2 by the Presence of Pd/Pd Oxide
HI+
Tuning out-of-plane Piezoelectricity in 2D Materials using Ion Beams
Defect Engineering of Ferroelectric Thin Films – Leveraging Ion Beams for Improved Function
Exploring Proximity Effects and Large Depth of Field in Helium Ion Beam Lithography: Large-area Dense Patterns and Tilted Surface Exposure
Fabrication of Plasmonic Nanostructures by Helium-Ion Milling
BREAK - Complimentary Coffee in Exhibit Hall
Towards Atomically Precise Carbon Quantum Electronic Devices
Fabrication of High-Q nanofiber Bragg Cavity Using a Helium Ion Microscope
Time of Flight Secondary Ion Mass Spectrometry in the Helium Ion Microscope for Battery Materials and Other Nanoscale Problems
LS+
X-Ray Insight into Fuel Cell Catalysis: Operando Studies of Model Surfaces and Working Devices
Multi-scale Operando X-ray Tomography of Solid-state Li Battery Electrolytes at Elevated Temperatures and Pressures
Correlating the Atomic and Electronic Structure in the Formation 2DEGs in Complex Oxides
Uncover the Mystery of Oxygen Chemistry in Batteries through High-Efficiency mRIXS and Theory
LS+
How to Probe Solid/Liquid Interfaces using Standing-wave Photoemission?
In situ Spectroscopy of Synthesis of Next-Generation Cathodes for Batteries
Structural Heterogeneity and Dynamics of 2D Materials Studied by Full-field X-ray Diffraction Microscopy and Ultrafast Surface X-ray Diffraction
MI+
Using Novel Magnonic Device Concepts for Efficient Information Processing
Spin-Polarized Scanning Tunneling Microscopy of <10 nm Skyrmions in SrIrO3/SrRuO3 Bilayers
Relieving YIG from its Substrate Constraints - YIG Resonators on Various Crystalline Substrate Materials
Magnetic Textures in Chiral Magnet MnGe Observed with SP-STM
BREAK - Complimentary Coffee in Exhibit Hall
Dzyaloshinskii-Moriya Interaction in Magnetic Multilayers
Transport in Goniopolar and (pxn) Metals
MS+
Materials and Fabrication Challenges for Neuromorphic and Quantum Computing Devices
IBM Q: Quantum Computing in the 21st Century
BREAK - Complimentary Coffee in Exhibit Hall
Quantum Information Science at AFRL
Neuromorphic Computing: From Emerging Devices to Neuromorphic System-on-a-Chip
NS+
Multiprobe Scanning Tunneling Microscopy and Spectroscopy: Atomic-level Understanding of Quantum Transport in Functional Systems
Light and Heavy Ions from New Non-classical Liquid Metal Ion Sources for Advanced Nanofabrication
Visualizing the Interplay between Spatial and Magnetic Confinement in Graphene Quantum Dots
Using Controlled Manipulation of Molecules to Trace Potential Energy Surfaces of Adsorbed Molecules
BREAK - Complimentary Coffee in Exhibit Hall
Direct Writing of Functional Heterostructures in Atomically Precise Single Graphene Nanoribbons
Effects of Helium and Neon Processing on 2D Material Properties
Operating Molecular Propeller in Quantum Regime with Directional Control
PS-ThM
Measurement of Plasma Neutral Densities in a Very High Frequency Ar/NH3 Plasma with a Line-of-sight Threshold Ionization Mass Spectrometry
Radical Probe System for In-Situ Measurements of Hydrogen, Oxygen and Nitrogen Radical Densities
Post Charge Separation Grid Ion Flux Evaluation in Inductive Coupled Plasma Source Downstream Asher
Development of a Novel Langmuir Probe for the Investigation of Dusty Non-thermal Plasmas
Historical Review of Microwave Plasma Diagnostics using Plasma Cutoff Phenomenon
BREAK - Complimentary Coffee in Exhibit Hall
Characterization of Inductive Coupled Plasma Source RF Power Pulsing for Advanced Surface Treatment Applications
In-situ Measurement of Deposited Tilm Thickness and Electron Density by Double Curling Probe
Study of Selective PECVD of Silicon on Silicon Nitride and Aluminum Oxide
SE+
Core/Shell Particles using a Plasma-based Reactors
Formation Mechanisms of Converted Layer During Erosion of Composite Al-Cr Arc Cathodes
Self-organization of Plasma in RF Magnetron Sputtering
Study of High Power Pulsed Magnetron Sputtering Discharge with Positive Bias on the Target after the Main Pulse
Innovative PVD Strategies for the Design of Novel TiO2-based Photoanode Utilized in Dye-sensitized Solar Cells
BREAK - Complimentary Coffee in Exhibit Hall
Enhancing the Far Ultra-Violet Optical Properties of Aluminum Mirrors with a Single Step Approach to Oxide Removal and Fluorine Passivation
Improving the Crystallinity of Inorganic Coatings Synthesized by Atmospheric Plasma using a New Device for Heating the Substrate
Improved Nitride Formation on Titanium Substrates by Femtosecond Laser Processing with Secondary Plasma
Characterizing the Spatially Dependent Properties of Plasma Polymerized Acrylic Acid Films
SS+
Chemical and Electrochemical Stability of Perovskite Oxide Surfaces in Energy Conversion: Mechanisms and Improvements
Mechanism of Oxygen Reduction Reaction on Nitrogen-doped Carbon Catalysts
Copper Corrosion Inhibition Investigated on the Molecular Scale Using APXPS
Analysis and Deliberate Modification of Electrochemical Interfaces
BREAK - Complimentary Coffee in Exhibit Hall
An Investigation on Active Sites of La2O3 Catalyst for OCM Reaction: A Combined Study of in situ XRD, XPS and Online MS
Interaction of Amino Acids on Au(111) as Studied with EC-STM: From Islands to Magic Fingers
Deposition and Structure of MoO3 Clusters on Anatase TiO2 (101)
Ionic Conducting Nanostructures Tailored on Porous Mixed Conduction Composite Electrodes for Enhancement of Oxygen Reduction Reaction
TF+
Redesigning Batteries into Efficient Energy Harvesters and Sensors for Wearable Applications
Engineering Effective Back Contact Barrier by interfacial MoSe2 defect states for CZTSe: nanolayer Ge solar cells.
Development of Low-Cost, Crack-Tolerant Metallization Using Screen Printing for Increased Durability of Silicon Solar Cell Modules
Fabrication of Optical Test Structures for Enhanced Absorption in Thin Multi-junction Solar Cells
Phosphorus as a p-Dopant in Pyrite FeS2, a Potential Low-cost earth-abundant Thin Film Solar Absorber
BREAK - Complimentary Coffee in Exhibit Hall
Relaxor-ferroelectric Thin Films for Energy Harvesting from Low-grade Waste-heat
Thermal Treatment Effects on the Thermoelectric Devices from Sn/Sn+SnO2 Thin Films
Thermoelectric Properties of Efficient Thermoelectric Devices from Sb/Sb+SnO2 Thin Films
3D Printed Triboelectric Nanogenerator
Sessions | Time Periods | Topics | Schedule Overview