Mechanical Properties of Polycrystalline Graphene

Lévy Flights Found in Freestanding Graphene

Multilayer Graphene Strength Characterization

Nanoelectromechanical Systems Based on 2D Materials beyond Graphene -- Effects from Geometry, Nonlinearity, and Anisotropy

Phonon Spectroscopy of Graphene Field Effect Devices with the STM

Edge-state-induced Stabilization of Dopants in Graphene

Exploring the Thermal Stability of Two-Dimensional Black Phosphorus

Gas Permeation Through 1 nm Thick Carbon Nanomembranes

The Valence-Fluctuating Ground-State of δ-­Pu

Exchange Bias in Heterostructures Based on UO₂

Transport and Magnetism of 4f and 5f Systems: What we can Learn from Thermoelectric Power

Magnetic Properties of 2-2-1 Rare-earth and Uranium Compounds and their Interaction with Hydrogen

Structural, Electronic, and Magnetic Characteristics of Np₂Co₁₇ and Analogue Compounds Under Pressure

Alloying UH₃ as a Probe into the 5f Magnetism

An Overview of Additive Manufacturing

Material Considerations and Opportunities for Laser Powder Bed Additive Manufacturing

High Quality and High Speed EBM 3D Printing by the Integration of High Performance Electron Sources

Laser Induced Forward Transfer of High-Viscosity, Polymer-Based VO₂ Inks

Printing Multi-Functionality using Additive Manufacturing

ASSD 30th Anniversary Lecture: A Historical Perspective of the Materials Challenges and Instrumentation Solutions Available for Practical X-ray Photoelectron and Auger Electron Spectroscopy

Using Argon clusters for Improved XPS Information

In Situ Chemical Imaging of Environmental Liquid Surfaces and Interfaces Using Microfluidics and Dynamic ToF-SIMS: Toward Multimodal and Mesoscale Imaging

A VAMAS Inter-laboratory Study of the Measurement of Chemistry and Thickness of Nanoparticle Coatings

A Quantitative Quest: Single Cell Analysis by LG-SIMS

Ambient Mass Spectrometry Imaging of Live Cells and Tissues

Intricacies of Sample Preparation for ToF-SIMS Analysis of Biological Specimens

Understanding Hydration of Proteins by SALVI and Liquid ToF-SIMS

Direct Measurement of the Interaction Free Energies of Single Hydrophobic Peptides with Extended Hydrophobic Surfaces

Cells and Extracellular Matrices as Smart Materials: Dissecting and Rebuilding Mechaniobiological Units

Molecular Modeling of Biofunctionalized Hydrogels to Guide Hydrogel Design

Physisorption of Stimuli-Responsive Polypeptides with Genetically Programmable Aqueous Phase Behavior

Evidence of a Molecular Boundary Lubricant at Snakeskin Surfaces

Selective Self-Assembly of Acidic Nanofibrils by a Calcite-Binding Barnacle Cement Protein

Thiolene Reaction Applied to Passive Metal Oxide Surfaces for Addressing Protein Adsorption and Cell Adhesion

Scaling from Single Molecule to Macroscopic Adhesion at Polymer/Metal Interfaces

Tantalum Oxide Resistive Memory Devices by IAD

Capacitance and Resistance Switching in HfO₂ RRAM

Density Functional Theory Molecular Dynamics Simulations and Experimental Characterization of high-k/SiGe(110) and SiGe(001) Interfaces

Density-Functional Theory Molecular Dynamics Simulations of a-HfO₂/Ge(100)(2x1) and a-ZrO₂/Ge(100)(2x1) Interface Passivation

Role of Active and Inert Electrodes in Filament Formation in Resistive Switching Devices (RRAM)

Neutron Induced Effects on HfO_x-Based Resistive Random Access Memory

Relation of Low-k Interconnect Si-based Dielectric Breakdown to Resistive Switching Behavior

Thin Film Carbon Nanofuses for Permanent Data Storage

Low-k/Cu Resistive 2-Level PROM Memory Collocated with CMOS Back-End Metallization

Novel Contact Materials for Reliable Nanoelectromechanical Switches

New and Ongoing Developments in Thin Film Deposition from the Kurt J. Lesker Company®

H2O2 Gas: Revolutionary new molecule for ALD

In Situ X-ray Absorption Spectroscopy Technique for Metal/Water Interface Characterization

Tip Enhanced Raman Spectroscopy (TERS) of Graphene Nano-Ribbons and Graphene on Au Surfaces: Imaging and Vibrational Spectroscopy of Surface Reaction Products

Isomerization of One Molecule Observed through Tip-Enhanced Raman Spectroscopy: Azobenzene Thiol on Au(111)

In Situ Characterization and Reaction Studies of MnO_x/Co₃O₄ Catalyst for CO and CO₂ Conversion

In Situ and Operando Raman Methodology to Understand the States of Oxide Catalysts and Alkane Oxidative Dehydrogenation and Ammoxidation Reactions

Operando Studies of Dynamic Restructuring of Working Catalysts by Correlated Imaging and Spectroscopy Probes

A Correlation of Raman and Single and Multiple Layer Graphene Conductivity as Detected with a Cryogenic Multiprobe AFM with On-line Raman, NSOM and Other SPM Modalities

Surface Structure and Chemistry of Rh(110)-1×2 Under Reaction Condition and During Catalysis explored with AP-XPS and HP-STM

The Why, the What and the How of Nanomanufacturing

Large-Area Nanoimprinting and Nanoplasmonics for Energy Harvesting, LEDs & Biosensing

Scalable Nanomanufacturing of Plasmonic and Metasurfaces

Roll to Roll Processes at the University of Michigan: Continuous Patterning, Flexible OPVs, and Growth of Carbon Nanomaterials

Nanotube Templated Manufacturing of Hierarchically Structured High Throughput Fluid Filters

Improved Vacuum Deposition of Small Patterned Features Using Precision Shadow Masks and a Novel Low Pressure Sputtering Source

Time- Resolved Luminescence Nanothermometry with Nitrogen-Vacancy Centers in Nanodiamonds

Nanoscale Measurement and Diagnostics using Diamond Quantum Probes

Measurement of Carbon Condensates Using Small-Angle X-ray Scattering During Detonation of High Explosives

Surface Functionalization of Nanocarbons Formed from Detonating High Explosives

Quantum Sensing in Biology using the Nitrogen-Vacancy Centre in Diamond

Large Scale Production of Fluorescent Nanodiamond Particles

Diagnostics for Ionized Physical Vapor Deposition Chambers

Probing the Plasma Chemistry that Underpins Diamond Chemical Vapour Deposition

Ionization Zones and the Deposition of Thin Films in the Transition Region from Non-Reactive to Reactive Magnetron Sputtering including dc, HiPIMS, and Burst-HiPIMS Modes

Modelling of the Reactive High Power Impulse Magnetron Sputtering (HiPIMS) process

Pulsed Magnetron Sputtering Plasma Optimization for Large Area Growth of Two-dimensional MoS₂

Molybdenum Nitride Formation by N₂ Plasma Exposure on Molybdenum Disulfide: In-situ Surface Study

Low Temperature Synthesis of AlYB₁₄ by High Power Pulsed Magnetron Sputtering

Atomic Layer Etching to Escape Process Tradeoffs for 7nm Technology and Beyond

Understanding of new processes for Atomic Layer Etching

Self-Limited Ion Implantation for Precise Low-k Spacer Etching

Self-limiting Cyclic Etching of Silicon Nitride using Infrared Irradiation

Prospects for Thermal Atomic Layer Etching: Materials and Selectivity

Atomic Layer Etching of Al₂O₃ Using Sequential, Self-Limiting Thermal Reactions with Trimethylaluminum and Hydrogen Fluoride

Low Damage Etch Chamber for Atomic Layer Etching

Modeling of Electron-Beam Generated Plasmas: Validation and System Design

Enhanced Reaction Rate and Precursor Transport in Focused Electron Beam Induced Etching Via Pulsed Laser Assistance

Designer Electrons: Quantum Information and New Particles in Atomically Assembled Matter

Scanning Quantum Dot Microscopy

Local Probing of the Photo-carrier Lifetime by Kelvin Probe Force Microscopy

Nanoscale Capacitance-Voltage (C-V) Curves: Using Scanning Microwave Impedance Microscopy (sMIM) to Characterize Local Electrical Properties of Linear and Non-Linear Materials

STM Study of the Correlation between Structural, Magnetic, and Electronic Properties of Co Nano-Islands on Cu(111)

Probing Electrostatic Field Effect in Quantum Materials by Microwave Impedance Microscopy

Subsurface Visualization of Soft Matrix using 3D-Spectroscopic Atomic Force Acoustic Microscopy

Quantifying the Effects of Cantilever Modes Shapes on Studies of the Liquid-Solid Interface

Liquid-Jet Ambient Pressure Photoelectron Spectroscopy Studies of the Liquid/Vapor Interface of 1-Propanol and 2-Propanol Aqueous Solutions

Near Ambient Pressure XPS at the SLS – In Situ Cell Design for Solid/Vapor Interfaces and First Results in Environmental TiO₂ Photocatalysis

Ambient Pressure XPS Observation of Electrode Surfaces During Electrochemical Reactions

Formation of Heterogeneous Multiple-Oxide/Hydroxide Species on a GaP(111) Surface Tracked by In Situ Near-Ambient Pressure XPS

Investigation of Liquid/Solid Interfaces using Photoelectron Spectroscopy

Surface and Bulk Crystallization Kinetics of Amorphous Solid Water Nanoscale Films

Environmental Effects on Oxidative Surface Passivation Across Al_xFe_yNi_1-x-y Composition Space

Hydrogen-Bonded Self-Assembled Molecular Structures on Hexagonal Boron Nitride

Suppression of the Topological Surface State of Bi₂Te₃ by the Organic Molecule Manganese Phthalocyanine

Surface Chemistry of Single-Layer MoS₂

On the Adsorption Behavior of a Porphyrin on Different Cu Surfaces: A Comparative Scanning Tunneling Microscopy Study

Redox-Active On-Surface Assembly of Metal-Organic Chains with Single-Site Transition Metals

Ultra-thin Bi(110) Films on Si(111)√3x√3-B Substrates

STM Study of Growth Processes for Ir/Ge(111)

Gas Sensor Resistance Changes for Ar/O₂ and H₂O Plasma Modified SnO₂ Nanomaterials

Enhanced Adsorption of CO₂ at Steps of Planar ZnO(0001) Grown on Au(111)

Characterization of Band Gap and Lattice Constant of Ultrathin ZnO Layers on Au(111)

Submonolayer Water Adsorption on Stepped and Planar Pt Surfaces

Photovoltage Design for ALD Metal Oxide Protected Solar-Water-Splitting Photoanodes

Activity and Thermal Stability Enhanced Platinum catalysts with Nano-scale Oxide Coating via Atomic Layer Deposition

Passivation of Highly-doped c-Si Solar Cell Surfaces by Atomic Layer Deposition

Low Temperature Plasma-Assisted Atomic Layer Deposition of TiO₂ Blocking Layers for Organo-Metal Halide Perovskite Solar Cells

Ultra-thin transition Metal Oxide-titania Alloy Coatings for Water Oxidation by Atomic Layer Deposition

Atomic Layer Deposition of Nickel-Iron-Oxide Catalysts for Photoelectrochemical Splitting of Water

From Atom to Solid: The Structure of Amorphous ALD Thin Films and Nanolaminates

Inorganic Functionalization of Colloidal Quantum Dot Solar Cells through ALD Infilling

Integrating Atomic Layer Deposited Lithium-Containing Thin Films for Lithium-ion Battery Applications

High Performance Precursors for Atomic Layer Deposition of Silicon Containing Films

Amorphous In₂O₃ and Sn-doped In₂O₃ Layers by ALD Prepared using Trimethyl Indium and Ozone

Towards Organic Electronics: Atomic Layer Like Deposition of ZnS and ZnO on Organic Thin Films

AlF₃ Atomic Layer Deposition or Al₂O₃ Atomic Layer Etching from Sequential Exposures of Trimethylaluminum and HF

A Comparison of Water Delivery Methods for Atomic Layer Deposition

Stoichiometric Dependence of the Interface of HfO₂ ZrO₂, TiO₂, Ta₂O₅ and La₂O₃ on Si (100) by ALD

In-situ Infrared Study of Atomic Layer Deposition of Molybdenum Nitride using Bis(tert-Butylimido)-Bis(dimethylamido) Molybdenum and Hydrazine

Atomic-Layer-Deposited In₂O₃:H Transparent Conductive Oxides: How to Achieve the Best Possible Carrier Mobility

Mechanical Property and Corrosion Resistance Evaluation of CrVN and CrSiN Thin Films Grown by a Hybrid High Power Impulse Magnetron Sputtering and Radio Frequency Sputtering Technique

MAXIV Vacuum System: From Design to Operation

Construction Status of the SuperKEKB Vacuum System

Commissioning of the 3 GeV TPS Accelerator Vacuum System

Construction, Installation, and Commissioning of TPS Booster Vacuum System

Design of a 250 KV DC Electron Gun Operating at Cryogenic Temperature

Introduction to Tri Alpha Energy's Fusion Concept, Vacuum Requirements and Performance of Our Current C2U Machine

Vacuum Architecture of an Extreme Ultra-Violet Exposure System