ICMCTF2018 Wednesday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Wednesday, April 25, 2018
1:30 PM 2:30 PM 3:30 PM
Corrosion Impact Of Alkali Carbonate At 750°C On Nickel Base, Stainless Steel And Alumina Forming Ferritic Steels
Challenges of New Materials and Coatings for Solar Receivers and Reflectors in Concentrated Solar Power Plants
Corrosion Testing of Diffusion-coated Steel in Molten Salt for Concentrated Solar Power Plants
High Temperature Molten Salt Corrosion Behavior of Aluminide and Nickel-aluminide Coatings for Heat Storage in Concentrated Solar Power Plants
High-Temperature Coatings for Protection of Steels in Contact with a Novel Molten Salt under Static and Flow-Accelerated Conditions for CSP Technology
Particles in PVD-Coatings: Imperfection or Functional Add-on Feature?
Gradient Coating for NIF Double Shell Targets
Growth Morphology and Piezoelectric Properties of AlN Thin Films Deposited by Reactive DC Magnetron Sputtering
Plasma Generation and Coating Composition from Ti-C, Ti-Al, and Ti-W Cathodes used in DC Vacuum Arc
Improved Adhesion Strength of the Gradient Zn-Mg Coating on TRIP Steel
Tribology of Diamondlike Carbons in Various Application Environments
Synthesis and Comparison of Highly Tetrahedral Amorphous Carbon by Arc-mixed HiPIMS and Arc-free HiPIMS Modes
Evaluation of Superhard ta-C Coatings for the Machining of Synthetic Materials
Selection of DLC Coatings for Application in Wrist-watch Mechanisms
The Role of HIPIMS and Discharges with a Positive Voltage Reversal on Coating Properties in Industrial Applications such as Hard Coatings and DLC
Towards New Horizon for DLC Coating Technology for Automotive Components
DC/Pulsed Cathodic Arc Discharge for Deposition of ta-C Coatings
A General Engineering Applicable Superlubricity: Hydrogenated Amorphous Carbon Film Containing Nano Diamond Particles
High Surface Area Silicon Quantum Dots for Energetic Materials
Investigating Transport Processes in Multilayer Films
Analytical Modelling of Propagation Velocity in Non-stoichiometric and Impact Compressed Nanolaminates
On the Fly Mixing and 3D Printing of Al/CuO Thermite for Controlling Reactivity
Tin-based Composites Combined with Reduced Graphene Oxide via a Simple Chemical Treatment as Anode Material for Rechargeable Lithium Ion Batteries
Additive Manufacturing of a Composite Solid Propellant with High Solids Loadings
Ternary Reactive Ru/Al/X Multilayers - The Effect of Stacking Sequence on Ignition, Propagation and Microstructure Evolution
Cladding Tribaloy T400 on Steel Substrates using a High Power Nd:YAG Laser
Tribological Properties of HVOF-Sprayed WCCoCr Coatings for Applying to Sliding Rings of Mechanical Seals
The Effects of Relative Humidity on Fretting Corrosion Behaviors of Silver-plated Electrical Contacts
Evaluation of Solid Particle Erosion Resistant Coatings for Gas Turbine Engine Applications
Influence of Sliding Induced Defects on the Frictional Properties of Molybdenum Disulfide (MoS2) and Graphene
Analysis of Tribo-mechanical Behavior of a Low Temperature Plasma Nitrided Austenitic 316L Stainless Steel
Tribological Systems Solutions for Gas Turbine Engines
The Friction and Wear Performance of DLC Coatings Deposited on Plasma Nitrided AISI 4140 Steel by Magnetron Sputtering under Air and Vacuum Conditions
On the Thermal Stability of Cathodic Arc Evaporated (Al1-xCrx)2O3 Thin Films
Phase Evolution of RF Magnetron Sputtered Cr-rich (Cr,Zr)2O3 Coatings Studied by In-Situ Synchrotron Experiments during Annealing in Air or Vacuum Conditions
Thick HS-PVD γ-Al2O3 Coatings for Challenging Cutting and Die Casting Applications
HiPIMS Deposition of Ta-O-N Coatings for Water Splitting Application
Evolution of Microstructure and Mechanical Properties of Graded TiAlON Thin Films Investigated by Cross-sectional Characterization Techniques
Hard Transition Metal Oxynitride Thin Films: From Synthesis to Applications
Propagation of Electric Field Waves in a DC Magnetron Plasma
From Surface to Coating - Tools for Surface Engineering
Nb – Doped TiO2 Deposited by Hybrid HIPIMS – CVD Process
Potential of Sequent and Simultaneous PVD PeCVD Hybrid Technology Combination. Investigations Aside Well-known Technologies in Duplex DLC and Co-deposition by Simultaneous Arc, Sputtering Evaporation
TiN Deposition using the Magnetized Hollow Cathode Activated Magnetron
Structural and Tribological Properties of Mixed Iron-titanium Borides Produced with Cathodic Arc Assisted Alloying and Electrochemical Boriding
Sessions | Time Periods | Topics | Schedule Overview