ICMCTF2011 Tuesday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Tuesday, May 3, 2011 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | 5:30 PM | ||||||||||
| B1-2 |
Growth Morphology and Corrosion Resistance of Magnetron Sputtered Cr Films
|
Fundamental Studies on the Deposition of Nanocrystalline Diamond (n-D) Films by Means of Pulsed Laser Deposition
|
Oxidation and Degradation of Nitride Thin Films at High Temperature under Controlled Atmosphere
|
Effects of Pulsed Laser Irradiation of As-Deposited c-BN-Films using Photons of 157 nm Wavelength
|
High Power Impulse Magnetron Sputtering of Niobium in Non-Reactive and Reactive Gas Environments
|
Barrier Capability of Reactively Sputtered TaxZr1-xN Films with Slight Ta Addition Against Copper Diffusion
|
The Influence of Substrate Biasing on the Crystal Orientation of γ-Al2O3 Films
|
Target Erosion Effects in Reactive Pulsed DC Magnetron Sputtering of Amorphous and Crystalline Alumina
|
Thermal Stability of Magnetron Sputtered Alumina Coatings with Crystalline Metastable Structure
|
Effect of Seed Layer Composition on the Structure of Arc-Evaporated High Al2O3 Containing (Al,Cr)2O3 Hard Coatings
|
Face-Centered Cubic (Al1-xCrx)2O3 Thin Films: Deposition, Characterization, and Heat Treatment Studies
|
Synthesis of Free Standing Al-Cu Intermetallics by Cathodic Arc Plasma Treatment
|
||
| B3 |
Growth of Bi5Fe0.5Co0.5Ti 3O15 Thin Films by Pulsed Laser Deposition
|
Nanoparticle Fabrication by Through Thin Film Ablation
|
Laser-Deposition and Characterization of Amorphous Thermoelectric Films
|
Multi-Beam, Multi-Target Pulsed Laser Deposition: Beyond Single Film Deposition
|
Capacitive Properties of x BaTiO3-(1-x) BiScO3 Thin Films Fabricated by Pulsed Laser Deposition
|
Attempt to Synthesize a Ti3SiC2 Coating by Pulsed Laser Deposition of a Ti-Si-C Multilayer Structure
|
Pusled Laser Deposition of Csl, TiC, and HfC Coatings for Field Emission Cathodes
|
Growth and Characterization of SBN60:Ce Thin Films
|
Structural and Compositional Control of BCN Films in PLD-Based Deposition Processes
|
Bonding Structures, Mechanical Properties and Biological Behaviors of CNx Films Prepared by Ion Beam Assisted Deposition and Laser Induced Arc Deposition
|
||||
| C2/F4-3 |
Ultrathin Metals – a New Approach for Transparent Conductive Films
|
Energy Band Lineup of Transparent Conducting Materials and High Efficient Electrodes for Organic Semiconductors
|
Quality Improvement of Organic Thin Films Deposited on Vibrating Substrates
|
Investigation of the Gate-Bias Induced Instability for InGaZnO TFTs Under Dark and Light Illumination
|
Effect of N2O Plasma Treatment on the Improvement of Instability Under Light Illumination for InGaZnO Thin-Film Transistors
|
Surface States Related the Bias Stability of Amorphous In-Ga-Zn-O Thin Film Transistors Under Different Ambient Gas
|
Hot Carrier Effect on Gate-Induced Drain Leakage Current in n-MOSFETs with HfO2/TixN1-x Gate Stacks
|
Pulse Laser Deposition and Characterization of V2O5/Mn3O4 Composites Thin Films for Supercapacitor Application
|
Chemiresistive Chlorine Gas Sensor Based on Spin Coated Copper(II) 1,4,8,11,15,18,22,25-Octabutoxy-29H,31H-Phthalocyanine Films
|
|||||
| D3 |
Metal Oxide Coatings for Dental Implants: What is Important?
|
Synthesis, Characterization and Performance of Silver Nanoparticle Coatings on Bioimplants
|
Tribo-Corrosion Mechanisms of Ti Based PVD Coatings on Y-TZP Dental Implants
|
Biotribolayer Formation in Metal-on-Metal Hip Prostheses- a Beneficial Coating Process?
|
Fabrication of Superhydrophobic Surfaces on Stainless Steel Substrates for Potential Biomedical Applications
|
What is the Role of Lipopolysaccharide (LPS) on the Tribocorrosive Behavior of Titanium in Dentistry?
|
Bio-Tribological Properties of UHMWPE Against Surface Modified Titanium Alloy
|
|||||||
| E1-2 |
Developing Coatings for Increased Operational Life in Gears
|
Understanding Lubrication Mechanism of Novel Boron-Based Lubricant Tested on ta-C Coating for Automotive Applications
|
Influence of the Lubricant on the Frictional Behaviour of Amorphous Carbon Coatings Sliding Against Steel
|
Nanocomposite Ti-Ni-C Coatings for Electrical Contact Brush Applications
|
Space Tribometers: Experiments on Orbit
|
Ultra-Low Carbon (ULC) Steel Modified by Triode Plasma Nitriding and PVD Coating: Effects on the Micro-Abrasive Wear Behavior
|
Application of the Friction Energy Density Approach to Quantify the Fretting Wear Endurance of MoS2 Solid Lubricant Films: Influence of Temperature and Frequency
|
The Onset of Plastic Yielding in Coated Spherical Contact
|
Tribological Properties of Laser Surface Texturing and Molybdenizing Duplex-Treated Steel
|
|||||
| TS2 |
Development of Li-Mn-O Thin Film Cathodes for Lithium-Ion Batteries by Magnetron Sputtering and Laser-Assisted Structuring and Annealing
|
Influence of a Coating on the Oxidation Resistance and Resistivity of Several Chromia Former Alloys for High Temperature Vapor Electrolysis Application
|
Deposition and Post-Annealing of Ceria Films Deposited by Pulsed Unbalanced Mangetron Sputtering
|
Sputtered Lanthanum Silicate Electrolytes for SOFCs
|
Nanostructured Titania Materials for PEM Fuel Cell Water Management
|
Electrolytic Co-Deposition for Synthesis of (Mn,Co)3O4 Spinel Coatings to Protect SOFC Interconnect Alloys
|
Development of Low Cost Protection Coatings for SOFC Interconnect Applications
|
Lithium Insertion into Vertically-Aligned Carbon Nanotubes During Growth
|
||||||