ICMCTF2011 Thursday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details. Click a Session in the first column to view session papers.
| Session | Thursday, May 5, 2011 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | ||||||||||
| A2-1 |
Effect of (CMAS-Assisted) Sintering under Service Conditions on the Thermo-Mechanical Stability of Plasma-Sprayed TBCs
|
Degradation of YSZ Thermal Barrier Coatings by CMAS Infiltration
|
The Effect of Volcanic Ash on Sintering of Plasma Sprayed Thermal Barrier Coatings
|
Mechanical Charactersation of Thermal Barrier Coatings After Thermal Treatments
|
Interfacial Strength Measurement of Oxidized EB-PVD Thermal Barrier Coatings by the Laser Shock Adhesion Test (LASAT)
|
Observations of Ferroelastic Switching by Raman Spectroscopy
|
Factors to Consider in Cyclic Oxidation Testing of Thermal Barrier Coatings with MCrAlY-Bondcoats
|
Characterization of the Alumina Scale Formed on Coated and Uncoated Doped
|
Laser Cycling Exposure of Thermal Barrier Coatings on Copper Substrates
|
Processing, Repairing and Cyclic Oxidation Behaviour of Sol-Gel Thermal Barrier Coatings
|
|||
| B5-2 |
Wear-Resistant PTFE Based Nanocomposites
|
Comparison of Different Bionic Structures Coated with CrAlN
|
Surface Modification of Nanostructured NiTi Shape Memory Alloy Thin Films Using Various Passivation Layers by dc Magnetron Sputtering
|
Mechanical Properties, Tribological and Corrosion Resistance Evaluation of Cathodic Arc Deposited ZrN/CrN Multilayer Coatings
|
High Temperature Crystallisation of Cr2AlC MAX-Phase Coatings Sputter-Deposited at Room Temperature
|
Recent Advances in Transition Metal Nitride–Based Nanostructured Hard and Superhard Coatings
|
Comparison of Superhard and Superelastic Ti-Based Nanocomposite Erosion Resistant Coatings on Ti-6Al-4V Substrates Prepared by PECVD
|
Effects of Nanostructure Formation on the Fundamental Physical Properties of Epitaxial Hf1-xAlxN(001) Alloys
|
|||||
| E2-2 |
Fatigue Damage in Ultra Thin Cu Films
|
Strain-Rate Sensitivity of Strength in Macro-to-Micro-to-Nano Crystalline Nickel
|
Strain Rate Effects on Coated Surfaces' Response and their Film Fatigue Fracture: An Investigation by a Novel Impact Tester with Modulated Repetitive Force
|
Microstructural Analysis of the Failure Mechanisms of Amorphous Carbon Coating Systems in Load-Scanning Tests
|
A Route to Avoid Thermo-Mechanical Fatigue Damage in Al Thin Films
|
Evaluation of Mechanical Properties in Cu Thin Films Under Various Substrate Conditions by Molecular Dynamics Simulation
|
Comparison Titanium and Zirconia Dental Implants’ Stress Analysis Using Finite Element Method
|
Effect of Nitrogen Flow Ratio on Microstructure and Property of Ta-Ti-N Thin Film by Reactive Sputtering of Ta-Ti Target
|
Mechanical Properties of Vapor Deposited Polyimide
|
Elastic Properties of Metastable Mo1-xSix Alloys: A Brillouin Light Scattering Study
|
The Effect of Film Thickness Variations in Periodic Cracking: Shear Lag Analysis and Experiments
|
Optimized Adhesion Strength of TiSiN Films Deposited by a Combination of DC and RF Sputtering
|
|
| F1-2 |
Fabrication of Aluminum Nanodot Assisted Growth of Nanoroots for Application in Amorphous/Crystalline Silicon Composite Thin Film Solar Cells
|
Platinum Doped Molybdenum Oxide Nanowires Alcohol Gas Sensor by Atomic Layer Deposition
|
Nanorods, Nanopipes, Nanosmiles
|
Effects of Temperature and Pulse Mode on Nanoporous Anodic Aluminum Oxide Film by Potentiostatic Anodization
|
Epitaxial Si Layer Formed on ZrB2 Thin Films - Silicene?
|
Synthesis of Bioactive NaHTi3O7 Films on Ti-Coated Si by a Hydrothermal - Galvanic Couple Method
|
Amorphous Phases and Crystallization Behaviour of Sputtered Fe1-xCx Films with x Ranging between 0.32 and 0.50
|
Frost Reduction on the Micro/Nano Structured Superhydrophobic Aluminium Surface
|
Micro/Nanostructured Surfaces of a-C:H:F Films with Anisotropic Properties
|
Correlation Between Plasma and Properties of Cr2AlC MAX Phase Coatings
|
|||
| F2-1 |
High Power Pulsed Magnetron Sputtering: a Review of Magnetron Ion Sputtering
|
A Two-Zone Model for High-Power Pulsed Magnetron Sputtering Discharges
|
Temporal Evolution of the Radial Plasma Emission Profile in HIPIMS Plasma Discharge
|
The Influence of Pulse Arrangement and Off-Time Between Positive and Negative Pulse in Bipolar HIPIMS
|
A Study on the Deposition Rate of Modulated Pulse Power (MPP) Magnetron Sputtering of Metallic Thin Films
|
The Effect of Various Deposition Parameters on the Phase of Tantalum Thick Films Deposited by Modulated Pulse Power Magnetron Sputtering
|
Control of the Magnetic Field for HiPIMS Process Optimization
|
TiAlN Coatings Grown by HIPIMS
|
Titanium Aluminum Nitride Sputtered using HIPIMS Technology
|
||||
| G6 |
Current and Future Applications of HIPIMS
|
Comparison of Hard Nitride Coatings Deposited by Industrial Scale AIP and HIPIMS Equipment
|
Hybrid PVD Industrial Deposition Equipment for R&D Purposes
|
Advantages of New Generation of Superior Arc Management Circuity
|
PVD Systems and Technology for Dedicated Hard Coatings: Challenges and Solutions
|
Laser-Arc-Module System Combined with a Novel Filtering Unit for Industrial ta-C Coating of Parts and Tools
|
InlineCoater™ 300: A New PVD System for Fast Research and High Volume Production
|
||||||
| PD |
Superhard Transition Metal Diboride Coatings
|
Intelligent Self-Healing Corrosion Resistant Vanadia Coating of Flower-Like Morphology for AA2-24 and Novel Magnesium Alloys
|
Life Time Analysis of MCrAlY Coatings for Industrial Gas Turbine Blades (Calculational and Experimental Approach)
|
Development of Photonic Platforms from Hybrid Sol-Gel Thin Films
|
Vertical Growth of Carbon Nanotubes on Bulk Copper Substrates for Charge Storage Applications
|
Thickness Ratio Calculation of Bi-Layer TiNi Alloys to Enhance Shape Memory Behavior using Stress-Strain Properties of the Individual Thin Films
|
|||||||