ICMCTF1999 Tuesday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Tuesday, April 13, 1999
1:30 PM 2:30 PM 3:30 PM 4:30 PM
A3-2
The Evolution of Thermal Barrier Coatings - Status and Upcoming Solutions for Today's Key Issues
Influence of EB-PVD TBC Microstructure on Thermal Barrier Coating System Performance Under Cyclic Oxidation and Hot Corrosion Conditions
EB-PVD Process Guidance for Highly Productive Zirconia Thermal Barrier Coating of Turbine Blades
Thermal Cyclic Behaviour and Structure of EB-PVD TBC
Improvement of Thermal Barrier Coating Stability by Surface Preparation of the Bond Coat With Large Area Electron Beams.
Reactively Magnetron Sputter Deposited Yttria Stabilized Zirconia Coatings: Phase Formation, Crystallographic Texture and Growth Morphology
CVD Mullite for Environmental Barrier Coating Systems
High Temperature Oxidation Behavior of Electron Beam Physical Vapor Deposited Thermal Barrier Coatings
Improved Oxidation Resistance of Thermal Barrier Coatings
B1-3
The Incorporation of a Plasma Nitriding Treatment in an Industrial Scale PVD Equipment for Tool Coating
Effects of Ar Pressure on Ion Flux Energy Distribution in Rf-plasma Assisted Magnetron Sputtering
The Development of a Functionally Graded TiC-Ti Multilayer Hard Coating.
Deposition of BN:C Films Using a B4C Target
Deposition and Characterization of Ti-B-N Coatings
Study of the Thermal Stability of Some Hard Nitride Coatings Obtained by Reactive Magnetron Sputtering
Temperature Dependence of Inductively Coupled Plasma Assisted Growth of TiN Thin Films
About the reactive High Ion Sputtering (H.I.S.TM) of Cristalline Al2O3 with Pulsed dc and r.f. PVD-process Technique
Characterization of Alumina Coatings Deposited by Conventional Reactive Magnetron Sputtering and High Ion Sputtering with Pulsed Bias
Multifunctional Nanocomposite Wear-resistant PVD-coatings with High Hardness and Low Friction Coefficients
Effect of Target Material and Process Parameters on Properties of Metal Containing DLC Coatings
B6
In Situ Plasma Diagnostics of Laser Ablated Carbon Plumes for Optimized Deposition of Novel Carbon and CN Coatings
Studies of the Ablation Plume Arising in 193 nm Laser irradiationof Graphite in Vacuo
Studies Of Laser Ablated Plumes For Fuzzy Controlled Film Deposition
Tunable Magnetoresistance and Elevated Curie Points of La0.7√sub 0.3MnO3 Films Made by Pulsed Laser Deposition
Laser Deposition of Hard Carbon Coatings
Ceramic Thin Film Deposition by Nanosecond, Picosecond and Femtosecond Lasers
Laser-induced Surface Modifications of Uncoated and Alumina Coated WC-Co Substrates
Magnetron Assisted Pulsed Laser Deposition of W-C and W-C-S Coatings
C2
Nanocomposite Films for Photonics
Fracture Toughness and Adhesion of Multilayers Intended for Optical Devices
HfO2/SiO2 Stacks for High Power Laser Applications
Optimising the Deposition Conditions for Reactively Pulsed Magnetron Sputtered Films
Structural and Optical Properties of Titanium Oxide Thin Films Deposited by Filtered Arc Deposition
Composition Dependent Structural Properties of Pb1-xEuxSe Thin Films
The Development and Testing of Emissivity Enhancement Coatings for Thermophotovoltaic (TPV) Radiator Applications
Intense and Fast Photoluminescence from C+ -Implanted into SiO2 Films
Effect of Substrate on the Growth of LiNbO3 Epitaxial Film by Sol-Gel Procedure
E5/D4-2
Growth and Tribological Properties of Amorphous H-Carbon Nitride Produced by Ion Beam Technique
Ultra Thin DLC Films for Use as Thin-film Magnetic Disk Overcoats
Tetrahedral Amorphous Carbon Ultra-Thin Film as Slider ABS Overcoat for High Areal Density AMR/GMR Magnetic Recording
Tribological Properties of a-DLC/Ti-Based and H-DLC-Based, Functionally Graded Nanocomposite Coatings
Tribological Behaviour of Oriented Diamond Coating / Steel Couple Under Various Environments
Boro-Nitriding of Iron and Steel by Microwave Post-Discharge Nitriding Followed by Paste Boridizing.
Comparison of Structure and Microhardness of Ti2N, TiN, TiN+TiC+Ti(C,N)/DLC, TiN/DLC and TiC/DLC Films Prepared on Ti-6Al-4V Alloy by Plasma-Based Ion Implantation
Studies on a-C:H:N Films Deposited by Chemical Vapour Deposition of Acetylene + Nitrogen for Tribological Applications
F4
Magnetism and Microstructures in Thin Films, Multilayers and Nanostructures
Structural Analysis of (Ti 1 - x Al x)N Graded Coatings Deposited by Reactive Magnetron Sputtering
An EELS Study of Commercial Carbides
High Resolution Analysis of Thin Films with the FE-SEM
High Resolution Thickness and Interface Roughness Characterization in Multilayer Thin Films by Grazing Incidence X-ray Reflectivity
Original and Sputtering Induced Interface Roughness in AES Sputtering Depth Profiling of SiO2/ Ta2O5 Multilayers.
Materials Characterization via the Internet: A Demonstration of TelePresence Microscopy
G2-2
Coating Restoration of Damaged Parts for Oil Processing Equipment
Development and Applications of Chemical Vapor Deposited Polycrystalline Diamond
G3
Fundamentals of the Hollow Cathode Discharge and the Plasma Database GAPHYOR
The Use of Hollow Cathode Structured Magnetron Targets
Effect of the Gas and Cathode Material on the rf Hollow Cathode Discharge
Parallel Operation of Hollow Cathode Plasma Sources
Jet Matrix Plasma Source for Near Atmospheric Pressure Operation
H3
SiC MEMS: Opportunities and Challenges for Application in Harsh Environemnts
Thin Film MEMS for Biomedical Applications
Some Issues Associated With The Use Of Aluminum-4%Copper Alloys As Interconnect Material In Micromachined Devices
Ferroelectric Thin Films for MEMS Applications
Integrated Ferroelectric Thin Films for MEMS Microactuator and Thin Film IR Imaging Devices
Sessions | Time Periods | Topics | Schedule Overview