Carbon Thin Films with Enhanced Properties from Cathodic Arc Plasmas

Vacuum Arc Deposition of TiN, NbN and TiN/NbN Multi-Layer Coatings

Linear Magnetron Arc Cathode and Macroparticle Filter

Influence of an Electrical Field on the Macroparticle Size Distribution in a Vacuum Arc

A Comparison of DC and AC Arc Thin Film Deposition Techniques

Effect of Nitrogen Pressure and Bias Voltage on the Structure and Properties of arc PVD Molybdenum Nitride Coatings.

The Investigation of Composition and Oxidation Effects on TiAlN Coating By Magnetic Filter Cathodic Arc Deposition

Electrical and Optical Properties of Diamond-like Carbon

Large Area Deposition of Field Emission Cathodes for Flat Panel Displays

Improvement of the Wear and the Corrosion Resistance of C/Al-Composites by Diamond-like Carbon Coatings

Electron Field Emission from Amorphous Carbon Nitride by ECR-CVD Synthesis

Field Emission Display Development at Motorola

Electron Field Emission and Secondary Electron Emission Characteristics From Cesiated Amorphous Carbon Films

Field Emission Properties of Nanostrucured Carbon Films

Study of the Wear and Friction Behaviour of Hard Sputtered Carbon Coatings

Tribological Evaluation of CN_x Thin Films for Space Applications

Influence of Soft Coatings on Chip Formation and Cutting Performance

Enhanced Mechanical Seal Performance Through CVD Diamond Films

Pitting Failure Mode in Thin Film Coated Surfaces

Induction Surface Hardening of Hard Coated Steels

Enhanced Tribological Properties of TiN/CN_x Multilayer Coatings with an Equiaxed Microstructure

A Simulation Test for the Selection of Coatings and Surface Treatments for Plastics Injection Moulding Machines

Development of TiC-Coated M62 Balls for Hybrid Bearings with Reduced Sphericity Distortion

Relative Significance of Elastic and Thermal Property Mismatches for Wear Protection with Hard Coats in Tribological Systems

Wear and Friction Behaviour of Duplex Treated AISI 4140 Steel

Stress and Oxidation in CuNi Thin Films

Internal Stresses, Young's Modulus and Practical Adhesion of Organic Coatings Applied onto 5754 Aluminum Alloy

Splitting Hard Films off the Substrate

Evolution of the Microstructure and Mechanical Properties of TiNx Thin Films Through the Thickness

Substrate Straining Tests of TiN Coatings on Tool Steel Substrates

Critical Loads and Frictional Force Measurements in the Industrial Scratch Testing of TiN on M2 tool Steel.

Comparison of the Failure Mechanisms During Scratch Testing of Chromium Nitride and Titanium Nitride Coatings Deposited by Cathodic Arc Evaporation

3D Boundary Element Modelling of Elastic Ball on Flat Contact on Bi-Layer Composites With Very Thin Coatings : Influence of Internal Stress

The Concept of an Advanced Impact Tester Supported by Evaluation Software in Characterization of Hard Layered Media

Characterisation of Surface Coatings Using the Nanoscratch Technique; Appraisal and Examples

The Effects of the Various Intermittent Annealing Temperatures on the Mechanical Properties of the 45 Degree Rolled Rhenium Samples.

Determining Substrate Temperature During Cathodic Arc Deposition

The SLC-technology for Chromelike Surface - A New Process Combining Powder Painting With Physical Vapor Deposition

Process and System Design for Chromium Coating of Deeply Recessed Parts Using Cathodic Arc or Sputtering

Performance of Hard Coatings, Made by Balanced and Unbalanced Magnetron Sputtering, for Decorative Applications

Corrosion Characterization of Decorative Coatings Deposited by Cathodic Arc Evaporation