AVS2007 Monday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Monday, October 15, 2007
8:00 AM 9:00 AM 10:00 AM 11:00 AM
AS-MoM
Quantitative Surface Analysis - Applying Thirty Years of Progress and Addressing New Analysis Needs
Some Highlights and New Directions in Quantitative AES and XPS
The Bulk Ratio Method for Determining Surface Enhancement Using Auger Analysis
Investigation of Average Matrix Relative Sensitivity Factors in Auger Electron Spectroscopy
Quantitative Surface Chemical Microscopy
Quantitative Characterization of Nb SRF Accelerator Cavity Surfaces Based on the Work of Seah and Powell
Formation of Ultra Thin Oxide Free Protective Coatings on Chromium and 316 L Stainless Steel from Etidronic Acid
X-ray Photoemission Analysis of Chemically Treated CdZnTe Semiconductor Surfaces
EM-MoM
An Organic Interlayer for Organic Thin Film Transistor
Control of the Molecular Orientation of Thin Films of a Solution Processable Organic Semiconductor
Interfacial Influences and Electron-Injection Mechanisms of Tris-(8-Hydroxyquinoline)-Aluminum Doped with Cesium-Derivatives In Organic Light Emitting Devices
Ultraviolet-Enhanced Device Properties in Pentacene-Based Thin-Film Transistors
High Efficient Organic Light-Emitting Devise with MoO3
Electronic Transport Processes in Polymer Transistors
Relationship between the Morphology, Contact Resistance and Field-Effect Mobility in Poly(3-hexylthiophene) based Field-Effect Transistors
Potential Profile Evolution in Static and Dynamic Junction Light-Emitting Electrochemical Cells
Rubrene Polycrystalline Transistor Channel Achieved through In-Situ Vacuum Annealing
IE-MoM
The TEAM Project and its Potential for In-Situ Experimentation
Dynamic Studies of Magnetization Reversal Processes and Future Prospects for In-Situ TEM
Understanding Dislocation Dynamics and the link to Macroscopic Properties
Structure and Structural Transitions of Supported Nanoparticles and In-Situ RHEED Observations
In-Situ Hot-Stage TEM of Interface Dynamics and Phase Transformations in Materials
Design and Development of an Environmental Cell for Dynamic In Situ Observation of Gas Solid Reactions at Elevated Temperatures
IPF-MoM
Solar Photovoltaics: At the Tipping Point
The Physics of Terrestrial Concentrator Solar Cells with Over 40% Efficiency
Thermoelectrics and Waste Heat Recovery
Current Status of Solid State Lighting
Emerging Energy Policy on Capitol Hill
MB+
Surfaces and Signals: Dissecting Surface Properties for Controlling the Settlement and Adhesion of Algae
Cationic Peptide SAMs for Biofouling Studies
Mechanics of Barnacle Glue Surfaces and Relation to Foul Release
Understanding Biofouling Mechanisms In Situ: Molecular Level Studies on Polymer Surface Structures in Water and Polymer-Protein Interactions
Surface Tension and Bacterial Attachment Revisited: The Effect of Components of Interfacial Tension
Interface Chemistry and Mechanics of Barnacles
MN-MoM
Materials for the Realization of High Performance Radio Frequency MEMS Devices
Nano-Scale, Directional Contact Metal Transfer in Hot-Switched MEMS Actuators
Growth of AlN by Pulsed Laser Deposition and Reactive Sputtering Techniques and Fabrication of RF MEMS Resonators
Science and Technology of Piezoelectric/Diamond Hybrid Heterostructures for High Performance MEMS/NEMS Devices
NEMS Resonators of Carbon Nanotube Network and Metal-Carbon Nanotube Composites
Addition and Removal of Stress to Drastically Tune Frequency and Quality Factor of Nanomechanical Resonators
Noise Temperature and Thermodynamic Temperature of Ultrasensitive Cantilevers Below 1 K
Process Development and Material Characterization of Polycrystalline BiTe and PbTe Thin Film Alloys on Si for MEMS Thermoelectric Generators
Fabrication of Metal-based High Aspect Ratio Microscale Structures by Compression Molding
Process Characterization of Vapour Phase Sacrificial Etching
NS-MoM
On-Surface Synthesis of Metallo-Porphyrin Nano-tubes by Vacuum Sublimation onto Noble Metals Substrates
Interactions of Nanoparticles with a Dewetting Solid Film
Solidification and Melting of Mercury in Nanotube Cavities
Template Guided Self-Assembly of Metal Oxide Quantum Dots
Luminescent Nanocrystals Labelled Beads for Directed Patterned Assembly
Selecting and Driving Nanoscale Assembly in Monolayer Films through Tailored Intermolecular Interactions
Assembly and Transfer of Functional Nanoparticle Arrays
Cyanuric Acid and Melamine on Au(111): Structure and Energetics of Hydrogen Bonded Networks
PL-MoM
Local and Surface Plasmon Couplings on Ag Nano-Sheet Composed of 2D Crystallized Ag Nanoparticles
Photochemical Synthesis of Shape Controlled Gold Nanoparticles: A Deeper Insight on the Growth Mechanism
Plasmonics: A Route to Optical Metamaterials and Nanoscale Optical Devices
Surface Plasmon Propagation and Detection
Plasmon Hybridization: Understanding the Nature of Plasmons in Complex Nanostructures
Fabrication of Large-Area Patterned Nanostructures for Optical Applications by Nanoskiving
Extraordinary Transmission and Enhanced Emission with Metallic Gratings having Converging-Diverging Channels
Biodetection by Nanoscale 2-D Plasmonic Crystal
PS1-MoM
Mechanisms of Surface Roughness Formation and Evolution during Plasma Etching
Molecular Dynamics Simulation of Hydrogen Induced Damage to Si and SiO2 Substrates during Reactive Ion Etching (RIE) Processes
Vertically Integrated Computer Aided Design for Devices Process
Ion Energy and Angular Distributions into Small Features in Plasma Etching Reactors: The Wafer- Focus Ring Gap1
Effect of Dual Frequency Bias on Ion Energy and Angular Distribution and Feature Profile in a Capacitively Coupled Plasma Reactor
Modeling of a Dual-Coil and Dual-Flow Inductively Coupled Plasma Reactor
Prediction of Feature Profile Evolution of Deep Si Etching under Effect of Plasma Molding in 2f-CCP in SF6/O2
Prediction of Feature Profile Evolution in Shallow Trench Isolation Etching
Investigation of Source and Bias Pulsing for High Aspect Ratio Silicon Etching
Global Plasma Simulations using Dynamically Generated Chemical Models
PS2+
Challenges for Microwave Plasma Etching of Low-k Dielectrics
High Frequency Capacitively Coupled Plasma for Low Ion Energy Dual Damascene Etching
Energy Distribution of Bombarding Ions, Etch Selectivity and Profile Control in Plasma Etching of Dielectrics
Etch Plasma Chemistry and Film Variability Effects on Dual Damascene Patterning of Porous Ultra-low k Materials
Surface Roughening Mechanisms during Porous SiOCH Etching Processes
Design for Manufacturability through Design-Process Integration
Feature Profile Simulation for Organic Low-k Etching in 2f-CCP in H2/N2
Removal of Scallops formed during Deep Via Etching for 3D Interconnects
High-rate Deep Anisotropic Silicon Etching with the Expanding Thermal Plasma Technique
SE-MoM
Thermal Stability of TiAlSiN and CrAlSiN Thin Films
Si Influence on Thermal Stability, Microstructure, and Hardness of Arc Evaporated Ti-Si-N Thin Films
Nanostructured PVD Hard Coatings in Industrial Research and Application
Lubricant-Friendly MoN-Cu Coatings for Extreme Tribological Applications
Effect of the Microstructure on the Mechanical and Tribological Properties of Cr-Si-N Coatings Prepared by Reactive Sputtering
Infrared-Reflecting Thin Film Coatings
Optically Transparent Nanocomposite Thin Films: the System Al-Si-N
Atomistic Processes during Synthesis of Hard Coatings Revealed by STM and LEEM
A Novel Form of Hard Hydrogenated Amorphous Carbon Grown under High Rate Conditions
SS1-MoM
Platinum Nanoparticle Shape and Stabilizing Agent Effects on Catalysis
Catalytic Properties of Pt Nanoparticles on HOPG
Environmental Effects on Morphology of Oxide Supported Gold Nanoparticles
The Growth and Characterization of Bimetallic Nanoclusters on Oxide Surfaces: Au-Pt on TiO2(110)
The Fabrication and Reactivity of Anchored Metal Nanoparticles on TiO2(110)
Enhanced Bonding of Gold Nanoparticles on Oxidized TiO2(110)
Tuning the Properties of Gold Atoms and Clusters on MgO by Film Thickness
Catalytic Dehydration of Alcohols on TiO2(110) and (WO3)3/TiO2(110) Model Catalysts1
Hot Electron Flow and Chemical Reactivity on Colloid Nanoparticles on Metal-Semiconductor Catalytic Nanodiodes
TiO2 with Buried Ag Nanoclusters for Photocatalysis1
SS2-MoM
Combined Scanning Tunnelling Microscopy and Stress Measurements to Elucidate the Origins of Surface Forces During the Oxidation of Si(111)-7x7
Etching of Si(100) Surfaces in H2O
Super-Saturation Etching on Si(100)-(2x1) via Cl Insertion: A New Reaction Pathway
The Growth and Evolution of Ag on Ge(111) Studied by LEEM
Chemical Vapor Deposition of Boron Carbo-nitride as a Passivation Film for Ge Surfaces
Novel Superstructure of Thin Pb Film on Si(111) Induced by the Interplay of Quantum Well States and Interfacial Adsorbates
Controlled Selforganization of Atom Vacancies in Monatomic Gallium Layers
Gold Nanowire Formation on Si(110) Studied by SPM
Faceting and Band-Flattening Induced by Sb-Indiffusion into Si(5 5 12)-2x1
Surface Reconstructions Induced by Calcium Fluoride Growth on Si(001)
TF-MoM
Conformal Polymeric Thin Films via Initiated Chemical Vapor Deposition
Nanolaminate Gas Diffusion Barriers on Polymers with Exceptionally Low H2O Permeabilities
Atomic Layer Deposition for Passivation and Corrosion Protection of Metal Substrates
Combinatorial Atomic Layer Deposition of Nanolaminates
Combinatorial Strategy to Address the Complexities of Surface Chemistry and Multicomponent Materials in Atomic Layer Deposition
Physical and Electrical Characteristics of ZrxHf1-xOy Films Deposited by Atomic Layer Deposition Method
An ALD Growth Study of ZrO2 on Si(100)
Sessions | Time Periods | Topics | Schedule Overview