Boon and Bane of Internal Interfaces and Microstructure Defects

The Material (in) Dependency of Impurity Affected Thin Film Growth

Stress in Sputtered Metal Thin Films: Dependence on Growth Rate and Pressure

Improved Ionization Fraction and Film Quality Using a Serpentine Linear Magnetron and a Modified HiPIMS Waveform

Microstructural, Mechanical and Erosion Properties of Cylindrical Magnetrons Sputter Deposited TiSiCN, TiAlVN and TiAlVSiCN Coatings on Inner Surface of Cylinder

Template Effect on Texture Evolution of VN Thin Films Deposited by Unbalanced Magnetron Sputtering

IN SITU High Resolution Stress Measurement Coupled with Interrupted Deposition in Case of Völmer-Weber Thin Film Growth

High-Frequency Properties of Soft Ferromagnetic Films on Cemented Carbide Substrates an Approach for Sensor Applications

Microstructure Investigation on CVD Ti_1-xAl_xN Hard Coatings

Elaboration and Characterization of (TI,AL)N Coatings Deposited by Thermal CVD for Protection in Severe In-service Conditions

Investigation of CVD-AlTiN Films with High Al Content

Microstructural Investigation of CVD Titanium Aluminium Nitride – Kappa Alumina Coatings

Deep Electron Microscopy Investigation of Ti_1-xAl_xN/TiCN Multilayer CVD Coatings

Some Guidelines for the Determination of Texture Coefficients in CVD α-Al₂O₃ Coatings

Hot Filament CVD Diamond and HIPIMS-Diamond Coating Technology on Cemented Carbide Substrates for Cutting Tool Applications

Magnetic Abrasive Finishing of Additively Manufactured Components for Biomedical Applications

Investigating Some New Coatings to Improve the Modular Junction of Total Hip Prostheses

Tribological Coatings on Titanium Alloy (Ti6Al4V) for Orthopedic Applications.

Osteochondral Tissue Regeneration into Porous PCL Scaffolds With and Without Chitosan Coatings of 98% or 80% Degree of Deacetylation

Vancomycin-Phosphatidylcholine Spray Coatings for Delivery of Antimicrobials from Implants

Tribologically Induced Oxidation of High-purity Copper as a Function of Sliding Distance

Investigation on the Reason for Low Friction between Diamond-like Carbon Coating and Ti-6Al-4V under Fretting Conditions

Tribological and Wettability Evaluation of Magnetron Sputtered WS-C/F Coatings

Tribological Properties and Oxidation Resistance of WN_X Thin Films at High Temperatures up to 500°C

Correlation between Evolution of Roughness Parameters and Micropitting of Carburized Steel Surfaces under Boundary Lubrication Condition

The Influence of Temperature on the Wear Mechanisms of a Cobalt-based Alloy Contact Subjected to Fretting: from an Abrasive Tribo-oxydation Process to the Glaze Layer Response

Coated Surface Wear Resistance Design by Comutational Modelling

Room and Elevated Temperature Sliding Wear Behavior and Mechanisms of a Cold Sprayed Ni-WC Composite Coating

Ultra-thick CrN/AlN Superlattice Coatings Deposited by a Combination of Plasma Enhanced Magnetron Sputtering and High Power Impulse Magnetron Sputtering

Deposition of DLC Coatings by HIPIMS to Arc Mixed Mode

Performance Improvements of Tungsten and Zinc Doped Indium Oxide Thin Film Transistor by Fluorine Based Mixing Plasma Treatment with a High-K Gate Dielectric

Effect Of Craters Formation On Deep Hardening Under Pulsed Electron Beam Treatment

Mechanical Property Evaluation of ZrCN Films Deposited by a Hybrid Superimposed High Power Impulse- Middle Frequency Sputtering System

The Effects of Temperature and Gas Mixture Composition on the Microstructure and Tribological Properties of the Plasma Nitrocarburized DIN 100 CR6 Steel

Selected Aspects of Industrial Applications of Hydrogen Free DLC Coatings Deposited by CVAE

Erosion Resistant PVD Coatings for Gas Turbine Compressor Blades

Synthesis and Characterization of Ta-C, Hf-C and Ta-Hf-C Coatings Obtained by Cathodic Magnetron Sputtering in Reactive Conditions

Thin and Thick Coatings and Applications in Aerospace Industry

HNT-Containing Ceramic PEO Coatings for Active Corrosion Protection of Magnesium Alloys

Development of PVD Coatings by R2R on Basis of TI/AG, TI/ZN and TI/AG/ZN on Textile Fabrics

Coating of Plastic Components by Electron-beam Evaporation

Aspects of Coatings on Plastic products for Decorative and automotive parts.

Combined Impact and Sliding Testing for Evaluation of Surfaces on Different Materials

Interfacial Stability of the Aluminium-Polyimide Interface Against Thermal Treatments