ICMCTF2012 Wednesday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details. Click a Session in the first column to view session papers.
| Session | Wednesday, April 25, 2012 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:50 PM | 2:50 PM | 3:50 PM | |||||||||
| A1-2 |
Microstructure degradation of simple, Pt- and Pt+Pd-modified aluminide coatings on CMSX-4 superalloy under cyclic oxidation conditions
|
Influence of vacuum parameters during heat treatment on surface composition of MCrAlY coatings
|
Effect of Water Vapor on Thermally Grown Alumina Scales on Bond Coatings
|
Effect of Water Vapor on the 1100oC Oxidation Behavior of Plasma-Sprayed TBCs with HVOF NiCoCrAlX Bond Coats
|
High Temperature Oxidation of Mo(Si,Al)2 Based Materials
|
Microstructural damage criterion for Ni based single crystal superalloy coated with NiAlPt
|
Compositional and Microstructural Changes in MCrAlY Coatings due to Interdiffusion with the Base Material
|
Effects of Hf and Zr additions on the properties and oxidation resistance of β-NiAl+Cr overlay coatings
|
|||
| B4-3 |
Structure and composition of TiSiCN coatings synthesized by reactive arc evaporation: implications for cutting tool applications.
|
Influence of Process Parameters on the Properties of Low Temperature (Cr1-xAlx)N Coatings Deposited via Hybrid PVD DC-MSIP/HPPMS
|
Development of a new type micro slurry-jet erosion (MSE) test method for evaluation of surface strength of hard thin coatings
|
Investigation of structural ,mechanical and tribological properties of TiAlN/CrN multilayer films deposited by CFUBMS technique
|
The Phase Transition and Corrosion Resistance of ZrO2(N) Thin Films on AISI 304 Stainless Steel Deposited by Ion Plating
|
Hardness Percolation in Plasma Enhanced Chemical Vapor Deposited a-SiC:H Thin Films
|
Tungsten-modified hydrogenated amorphous carbon coatings providing tailored friction properties
|
Characterization of Plasma Electrolytic Oxidation (PEO) Coatings on 6082 Aluminium Alloy
|
The microstructure and mechanical properties of Cr-Si-Ti-Al-N coatings
|
||
| B5-2 |
Tribological properties of Cr0.65Al0.35N-Ag self-lubricating hard coatings from room temperature to 550 °C
|
Mechanical, tribological and thermal properties of sputtered a-C:H:N:Nb coatings
|
Growth of Amorphous Hf-Al-Si-N Thin Films by DC Magnetron Sputtering
|
Nanocomposite coatings in the Al-Ge-N system: synthesis, structure and mechanical and optical properties
|
Shape- Recovery of Thin Film Metallic Glasses Upon Annealing
|
Thin Film Metallic Glasses: Unique Properties and Potential Applications
|
Improving the corrosion resistance and hardness of TaN films by silicon addition
|
Combinatorial studies of co-sputtered chromium-titanium oxide composite films
|
|||
| E4-1/G4-1 |
Development of Coating Technology Platforms for Wear Component Applications
|
Oxygen Plasma Etching of Diamond-Like Carbon Coated Mold-Diefor Micro-Texturing
|
Tensile properties of magnetron sputtered aluminum-scandium and aluminum-zirconium freestanding thin films: a comparative study
|
Near frictionless based on W-S-X magnetron sputtering coatings for Micromouldings.
|
Tribological contact analysis of a CrN coated surface under inclined impact-sliding wear tests against steel and WC balls
|
PVD coating development for advanced metal cutting
|
|||||
| G3-1 |
Atmospheric plasma-assisted deposition of antimicrobial coatings on textiles
|
Cold Atmospheric Plasma Inside Water
|
Deposition of DLC Films by Nanopulse plasma CVD at atmospheric pressure
|
A study of the interactive effects of hybrid current modes on the tribological properties of a PEO Plasma Electrolytic Oxidation coated AM60B Mg-alloys.
|
Insight into Plasma Discharge in PEO: In-situ Impedance Spectroscopy Study
|
Control of ion distribution functions in capacitive sputter sources
|
Tandem of DBD and ICP RF Atmospheric Plasma Systems for Yttrium Oxide Nanocoating of Consumable Semiconductor Parts
|
||||
| TS1-1 |
Textured CrN Thin Coatings Enhancing Heat Transfer in Nucleate Boiling Processes
|
Effects of strain on thermal conductivity in amorphous thin films
|
Surface engineering for improved thermal transport at metal/carbon interfaces
|
Heat flow across heterojunctions: Toward useful nanoscale thermal interface materials
|
Factorial increases in interfacial thermal conductance using a monolayer
|
Ruthenium organometallic complexes with photo-switchable wettability for boiling heat transfer applications
|
From hard coatings to thermoelectrics: effects of nanostructure on fundamental physical properties of transition metal nitride, oxide, and oxynitride thin film alloys
|
Modified Lithium Alanate for High-Capacity Thermal Energy Storage
|
Heat reduction of concentrator photovoltaic module using high radiation coating
|
||