Progress in Measuring and Understanding the Delamination Toughness of Zirconia Coatings

Monitoring Delamination of Thermal Barrier Coatings by Combined Photoluminescence Piezospectroscopy Imaging and Upconversion Luminescence Imaging Techniques

The influence of transient thermal gradients and substrate constraint on the delamination of thermal barrier coatings

Raman Spectroscopy and Neutron scattering of Ferroelastic Switching in Ceria Stabilized Zirconia

Effect of post heat treatment on thermal durability of thermal barrier coatings in thermal fatigue tests

New Perspectives on the Phase Stability Challenge in Zirconia-based TBCs

Influence of the mechanical behaviour of the under layer in coating spallation

Inhibiting High Temperature Densification Through Multi-Phase TBCs

Preparation and characterization of anti-wear and anti-bacteria TaN-Cu, TaN-Ag, TaN(Ag,Cu) nanocomposite thin films

Effects of sputtering gas for the preparation of CNx films by RF reactive sputtering

Comparison of sputter deposited WC coatings from alternative sources

The influence of the magnetic field strength on the poisoning behavior of Tantalum

Synthesis and Tribological Properties of W_xN_y Coatings

Excellent thermal stability of Cu films containing insoluble Ru, RuN_x and ReN_x for advanced barrierless Cu metallization

Microstructural features and thermal stability of AlN:Ag and Al-Si-N:Ag nanostructured films

Hard yet Tough Ceramic Coatings via Magnetron Sputtered Multilayersin Nanocomposite and Polycrystalline Architecture.

Time domain effect on growth kinetics of thin silver films

Analysis of the particle velocity range for deposition and the optimum velocity of cold sprayed particles using smoothed particle hydrodynamics method

Molecular Dynamics Studies of Grain Boundaries in Mazed-bicrystal Thin Films

A non-equilibrium thermodynamic model for the formation of a Cu-Sn intermetallics film on a Cu substrate

Epitaxially Grown V_xMo_1-xN/MgO(001) Thin Films by Reactive Magnetron Sputtering

Atomistic study of crack formation in strained thin films

Classical Molecular Dynamics Studies of Initial Nucleation Kinetics during TiN Thin Films Growth

Do nitride alloys exhibit Vegard's-like linear behaviour?

Toughness Enhancement in Transition Metal Nitride Thin Films by Alloying and Valence Electron Concentration Tuning

Bridging atomic structure with properties in III-Nitride heterostructures

The I-V transfer characteristics of a-IGZO TFTs deteriorated owing to the copper diffusion in the process of the source/drain metal

Light-accelerated instability mechanism depending on bias and environment in amorphous Indium-Gallium-Zinc-Oxide Thin Film Transistors

Suppressed Temperature-dependent Sub-threshold Leakage Current of amorphous Indium-Gallium-Zinc-Oxide Thin Film Transistors by Nitrous Oxide Plasma Treatment

Optimising OLED devices for solid state lighting applications using optical spectroscopy

New rare-earth quinolinate complexes for organic light-emitting devices

Effect of the deposition process and substrate temperature on the microstructure defects and electrical conductivity of thin Mo films

Characteristics and photocatalytic reactivity of TiO₂ beads synthesized using a microwave-assisted hydrothermal method

ZnO films deposited from a filtered cathodic vacuum arc: characterization and device applications

Filtered cathodic arc deposited ZnO:Al assisted by a high-flux low-energy constricted gas plasma source

The material challenges in oxide electronics: Recent progress in oxide films for electronic applications

Enhanced stability performance for Ga-doped ZnO films by indium co- doping

Temperature dependence of electrical properties in polycrystalline Ga-doped ZnO films deposited on oxide nanosheet seed layer

Optical and Electrical Characterization of Ga-doped ZnO Thin Films Grown by Atmospheric Spray Pyrolysis

Electrical Transport in ZnO and ZnMgO Films: A Comparison

Investigation of p-type conducting Cu-Al-O mixtures

Friction induced evolution of mechanical properties of engineered surfaces

Frictional Behavior of Silver Nano-pattern Fabricated by Thermal Dewetting

Scaling effects between micro- and macro-tribology for a Ti-MoS₂ coating

Mechanisms responsible for compositional variations of films sputtered from a WS2 target

Tribological characteristics of carbon nitride synthesized using MW-PCVD

The Role of Planar Defects in Achieving Low Friction and Wear in Lubricious Oxide Coatings

Structure and properties of nanocomposite DLC coatings on hard and soft substrates

Synthesis and Tribological Behavior of MoS₂-Au Nanocomposite Films

Electrodeposited of gold-multiwalled carbon nanotube to improve lubrication of composite films

A systematic study of suberlubricity potential of ta-C coatings

The wear resistance of boride layers in the four-ball lubricant test

Energetic aspects of thin film growth in HiPIMS and in other pulsed plasmas

Unique Property of Our Brand New Technology Based On High Power Pulse Sputtering.

Influence of pulse shape and peak current on the resulting properties of Ti-Si-C composite films deposited by HIPIMS

Highly ionized carbon plasmas for the growth of diamond-like carbon thin films with magnetron sputtering

Characterization of hard coatings deposited by HIPIMS system and their cutting performance

Properties of Ti_1-xAl_xN films grown by HIPIMS and in hybrid HIPIMS-DCMS configuration: a comparative study

(Cr_1-xAl_x)N: A Comparison of Direct Current, Middle Frequency Pulsed and High Power Pulsed Magnetron Sputtering for Injection Molding Components

Structure evolution in TiAlCN/VCN nanoscale multilayer coatings deposited by reactive High Power Impulse Magnetron Sputtering technolgy.

Structure and properties of thick CrN/AlN multilayer coatings deposited by the hybrid modulated pulsed power and pulsed dc magnetron sputtering