ICMCTF2009 Wednesday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Wednesday, April 29, 2009
1:30 PM 2:30 PM 3:30 PM 4:30 PM
Development of Multi-Element Nitride/Oxide Coatings
Preferential Sputtering of Oxides and Target Design for Stable Reactive Magnetron Deposition of Oxides
Low Temperature Deposition of Anatase TiO2 Film by Dual Magnetron Sputtering
Photocatalysis and Phase Transformation of Oxygen-Deficient Carbon-Containing Titania Films
Nucleation and Crystal Growth Behavior of α-Alumina by Reactive Magnetron Sputtering
Low-Temperature Deposition of Alpha Alumina by Physical Vapor Deposition without a Chrome Template Layer
RF Sputtered Piezoelectric Zinc Oxide Layers for Microfluidic Applications
Phase Transition and Mechanical Properties of Zr(N,O) Thin Films on AISI 304 Stainless Steel
Preparation of Artificial BiFeO3/SrTiO3 Superlattices by rf Sputtering
PVD Module for High Quality AC Reactive Sputtering of Oxide and Nitride Thin Films
Adhesion Improvement of Reactive RF-Sputtered Zirconium Nitride Films on WC Substrate
ZnO:Al Transparent Conducting Oxide Films of Very High Quality Synthesized by Filtered Cathodic Arc Deposition
Influence of Thermal Annealing on Electrical and Optical Properties of Ga-Doped ZnO Thin Films
Attractive Potential Substitute for ITO in Flat Panel Display
Thermopower and Optical Studies on Undoped and Manganese Doped Indium Tin Oxide Films
Reactively Co-Sputtering Transparent Conducting Oxide Films of Nb-Doped Titania
Structural, Electrical and Optical Properties of Transparent Zn1-xMgxO Nanocomposite Thin Films
Applications of Nanocomposites in Organic Electronic Devices
Cermet Structured a-c:H/Pt Thin Films as High Temperature Selective Solar Absorber Coatings
Microstructure and Mechanical Properties of CrAlN/Si3N4 Nanostructure Multilayered Coatings
Sol Gel Derived Hybrid Dielectric Thin films for ULSI Applications
Interfacial Scratch Adhesion Behavior of Multilayered Ti(BN):Ti(MoS2) Based PVD Coatings
Optimization of AlN Coatings for Tribological Applications
Surface Chemical Mechanisms of Lubricants Under Sliding Conditions
Expanding the Range of Temperature-Adaptive Solid Lubricant Coatings Beyond 25-700°C with the Aid of In Situ Wear and Surface Analysis Techniques
Optimization of the Coating Parameters for Micro Arc oxidation of Cp-Ti
Effects of Sicking-Sliding Zones on the Tool Wear and Coating Delamination When Machining Hard Materials
Quantification of the Incorporation Coefficient of a Reactive Gas on a Metallic Film During Magnetron Sputtering: the Method and Results
Experimental and Numerical Plasma Characterization in a Deep Reactive Ion Etch System
Initial Stages of Polycrystalline Thin Film Growth as Seen by Scanning Probe Microscopy
Surface Mound Formation During Epitaxial Growth of CrN(001)
In Situ Stress Evolution in TiZrN and TiTaN Thin Films Grown by Reactive Magnetron Sputtering
In Situ AFM Investigation on Tribo-Corrosion of CrSiN Film Adherent Tool Steel
Fast Characterization of Reaction Waves in Exothermic, Metal-Metal Multilayer Nanolaminates
Quantitative Measurement of Ion Energy Distributions Impinging onto Arbitrarily Biased Substrates During Plasma Deposition
Innovative Applications Enabled by Large Area Hot Filament Diamond Deposition
Industrial Scale Production of CVD-Diamond Coated Mechanical Seals and Electrodes
Characterization of Industrial-Scale LAFAD Technology and Applications
Development of a Magnetically Steered Cathodic Arc Evaporation Source
Integration Aspects of High Impulse Magnetron Sputtering Plus (HIPIMS+) Technology in an Industrial PVD Coating Machine
The New Vacotec/Eifeler Alpha 400/900P PVD Deposition System as a Basis for Innovative Coatings for Industries and Research
Hot Filament Diamond CVD – Technology and Applications
Manufacturing Photovoltaic Systems
Steady State and Transient Photoconductivity of a-Se90-xSb10Inx (0 ≤ x ≤ 15) Thin Films
Glancing-Angle Deposited Titania Films for Dye-Sensitized Solar Cells
High Performance Polymer Soloar Cells and Optical Sensors
Hybrid Solar Cells Based on Poly (3-Hexylthiophene):Fullerene Blend and TiO2 Porous Film
Photoelectrochemical Properties of Nitrogen-Doped Indium Tin Oxide Thin Films Prepared by Reactive DC Magnetron Sputtering Technique
Electroplated Coatings on Ferritic Steels for SOFC Interconnect Application
Improved Properties of SOFCs using Pre-Coated Sandvik Sanergy HT 22% Cr Ferritic Interconnect Steel
Development of Spinel Protection Layers for Steel-Based SOFC Interconnects
Structure and Conductivity of Apatite-Like Lanthanum Silicate Films for SOFcs Electrolytes
The Corrosion Properties and Interfacial Contact Resistance of TiN, TiAlN and CrN PVD Coatings in Simulated PEM Fuel Cell Environments
Sessions | Time Periods | Topics | Schedule Overview