Current and Future Research Directions for Coatings Used in Harsh Environments

Protective Coatings Against Metal Dusting

Influence of Al on the Carburization Resistance of a Ni Based Alloy Coating

High Temperature Corrosion Resistance of NiAlMo APS-Coating in Chlorine-Based Environments

Future Directions in Understanding the Factors that Influence the Life of Advanced High Temperature Materials

Degradation of APS CoNiCrAlY Bond Coats in Thermal Barrier Coatings by Vanadium, Phosphorus and Sodium Compounds

Deposition of Nickel-Silver Alloys by Magnetron Sputtering for the Protection of Stainless Steel Parts Against High Technical Corrosive Environments

Electrochemical Impedance Spectroscopy for Characterization of Nano Structured Coatings on -TiAl IN Molten Salts

Oxidation Behavior, Microstructure Evolution and Thermal Stability in Nanostructure CrN/AlN Multilayer Hard Coating

Oxidation Tuning of Cr-Al-N Coatings by Incorporation of Yttrium

Effect of Extra Nitrogen Additions in the Preparation of CrN & AlN Films on H13 by PVD Process

Pulsed Bias Sputtering of Crystalline Chromia and Alumina Films

Magnetron Sputtering and Characterization of α-Alumina Coatings on WC/Co Substrates

Structure and Mechanical Properties of Reactively Sputtered Complex Oxide Films

Characterisation of Alumina-Zirconia Thin Films Deposited by Reactive Dual Magnetron Sputtering

Comparative Study on Ag-Doped ZnO and Cu-Doped ZnO Thin Films Grown by Simultaneous dc and RF Magnetron Sputtering

Deposition of DNA Thin Films by Through Thin Film Ablation

Laser Materials Processing at NRL: From Thin Films to Devices

Effects of Nitrogen Ion Implantation on Plasma Polymerized Tetraisopropxytitanium-Oxygen-Helium Mixtures

Nanocomposite Metal-S-T Solid-Lubricant Thin Film Coatings Deposited by High-Power Ion Beam Ablation¹

Ion Beam Sputter Deposited TiAlN Bottom Electrode for the Dielectric and Leakage Characteristics of (Ba,Sr)TiO₃ Thin Film Capacitor

Mechanical Characterization of Coatings Using Frequency Domain Photoacoustic Microscopy

Influence of Treatment Parameters on the Interfacial Shear Strength in a Peo Coated Aluminium Alloy

Evaluation of PVD Coatings and Surface Treated Dies Used in Aluminum Pressure Die Casting

Investigation of Creep in Electroplated Sn and Ni-Sn Alloy on Copper at Room Temperature by Nanoindentation

Characterization of the Impact Response of Diamond-Like Carbon Coatings

Damage Evolution and Fatigue Delamination of Diamond Films Under Repeated Loading

Scratch Mechanisms of Low Adhesion Multilayer Coatings on Glass

Effects of Substrate Bias Frequencies on the Characteristics of Chromium Nitride Coatings Deposited by Pulsed DC Reactive Magnetron Sputtering

Plasma Surface Engineering For Industrial Applications

Surface Morphology of Low Alloy Steel Plates Treated by Electron Beam Excited Plasma Source

TiAl(N,C,O) Black PVD Coating for Decorative Applications

Development of Black Ti(C,O,N) Coatings Prepared by Reactive Sputtering

Advanced Tribological Coatings - Prepared in Industrial Scale Machines

Wear Indicating Sensors of Rotating Tools

Nanopatterning Interfaces for Toughness and Reliability

Galvanic Corrosion Protection for Mg Against Biofuel E85 and Engine Coolant via Electrolytic Plasma Oxidation (EPO) Process

Pulsed Current Deposition of Zn-based Coatings on Steel Substrates using Plasma Assisted Electrolysis

Analysis of Corrosion Resistance of Cr-Cu-N Nanocomposite Thin Films in Sodium Chloride Aqueous Solutions

Corrosion Resistance of Thermal Sprayed Al and Al-SiC Coatings on Magnesium Alloys

Microelectromechanical Systems (MEMS) Electrothermal Actuator with Out-of-Plane Motion

Structural Evolution and Electrochemical Performance of LiFePO₄/C Thin Films Deposited by Ionized Magnetron Sputtering

Theoretical and Experimental Studies Related to the Compositional and Microstructural Evolution of Oxide Thin Films

Structure, Elastic Properties, and Phase Stability of Cr_1-xAl_xN

Mathematical Simulation of the Layer Growth Kinetics During Post-Discharge Nitriding: From Early Stage to Quasi-Steady Stage

Atomistic Origin of the Isostructural Decomposition in Multinary Nitride Materials, a First-Principles Study

Thickness Uniformity and Morphology of Films Deposited Using a Filtered Pulse Cathodic Arc Source

A Direct View of Quantum-Stabilized Atomically Flat Films: from Magic Heights to Quantum Mirrors