ICMCTF2006 Thursday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Thursday, May 4, 2006
8:30 AM 9:30 AM 10:30 AM 11:30 AM
A3-3
Microstructural Observations of As-Prepared and Thermal Cycled NiCoCrAl Y Bond Coats
USAXS-Analysis of Electron-Physical Vapour Deposited Thermal Barrier Coatings and Application of Void Structure Modeling to Determine the Influence of Process Parameters on the Thermal Conductivity
Delamination-Indicating Thermal Barrier Coatings Using Rare-Earth-Doped Luminescent Sublayers
Development of Residual Stress and Damage in Thermal Barrier Coatings
Evolution in Photoluminescence and Electrochemical Impedance with Microstructural Changes in Thermal Barrier Coatings
Determination on Non-Contact Sensing of T BC/BC Interface Temperature in a Thermal Gradient
Effects of Long Term, High Temperature Aging on Luminescence from Doped YSZ Thermal Barrer Coatings
Infiltration-Inhibiting Reaction of Gadolinium Zirconate TBCs with Molten CMAS
B1
Fundamental Understanding and Development of Nanostructured Ti-Al-Si-N and Zr-N-O Thin Films
Multi-Component Nitride Coatings Derived from Ti-Al-Cr-Si-V Target in RF Magnetron Sputter
Influence of Nitrogen on the Microstructure and Nanomechanical Properties of TaSiN Thin Films by Magnetron Reactively Co-Sputtering
Reactive Gas Effects in Pulsed Magnetron Sputtering: Time-Resolved Investigation
AC Powered Reactive Magnetron Deposition of Indium Tin Oxide (ITO) Films from a Metallic Target
The Effect of Pulsed Magnetron Sputtering on the Structure and Mechanical Properties of CrB2 Coatings
Preparation and Characterization of Non-Evaporable Porous Ti-Zr-V Getter Films
An Analysis of Target Processees in Reactive Magnetron Sputtering
Monitoring and Control During Deposition of AlN Films by a PVD Process
B8-1
Materials Aspects of the Nanoscale Thin Film Design
Grain Size Evaluation of Pulsed TiAlN Nanocomposite Coatings for Cutting Tools
Hardening Effects in Annealed EB-PVD Nanocomposite TiAlBN Films
CrAlYN/CrN Superlattice Coatings Deposited by the Combined High Power Impulse Magnetron Sputtering / Unbalanced Magnetron Sputtering Technique
Comparison of Cr1-xAlxSiyN and Ti1-xAlxSiyN Coatings Prepared by Arc Evaporation
Microstructures, Mechanical Properties, and Tribological Properties of Ti-Si-B-C-N Nanocomposite Films by DC Unbalanced Magnetron Sputtering
Growth and Characterization of Epitaxially Stabilized SiNx in TiN/SiNx Multilayer Films
Pulsed Sputter Deposition of Binary and Ternary Oxides in the Systems Si-O, Cr-O and Al-O
Tribological Performance of Nano-Structured Ti-Si-N Films Syntheized by Cathodic Arc Evaporation
D3-2
Electronic Applications of Carbon Nanotubes
The Origin of Hysteresis in Field-Modulated Transport in Carbon Nanotube Field-Effect Transistors: Experiments, a Model, and Implications
Negative Differential Conductance in Single Wall Carbon Nanotubes at Room Temperature
Electronic Structure and Thermal Stability of Nitrogenated MWCNTs Probed by NEXAFS Spectroscopy
Finger Prints in Raman Spectra of Structurally Modified Carbon Nanotubes
Structural, Compositional, Mechanical Properties of Carbon Nanotube Reinforced Zirconia Matrix Nanocomposite Films by Sol-Gel Process
Fullerene-Like CPx; a First-Principles Study of the Relative Stability of Precursors and Defect Energetics During Synthetic Growth
E3-3
Adhesion and Fracture of ALD Films and Nanolaminates Under Sliding Contacts
Interface Cracking Behavior of Zinc Coatings on Steel: Experiments and Finite Element Calculations
Gas Barrier Properties and Anomalous Fracture Mechanics of Thin DLC Films Coated on Flexible Polymer Surfaces
Adhesion Improvement of Copper (CU) on Carbon (C) by Plasma Treatment and Molybdenum (Mo) Interlayers
Interface Fracture Energy of Cu/Polyimide Laminate for Flexible Print Circuit - Determination by a New Technique
Mechanical Properties of ITO Film Deposited on Polymers Treated by Linear Ion Source
Nano And Micro Tribo-Mechanical Testing of Thin Films
The Effect of Nitrogen Ion Implantation on the Mechanical and Tribological Properties of Chromium Electroplated by Different Processes
Tribological Behavior of Hafnium Diboride Thin Films
Behaviour of Shot Peening + WC-Co HVOF Sprayed Coating Under Complex Fretting Wear and Fretting Fatigue Loading Condiitons
Microstructure, Mechanical and Tribological Properties of Cr1-xAlxN Films Deposited by Pulsed Closed Field Unbalanced Magnetron Sputtering (P-CFUBMS)
Deposition and Mechanical Properties of Cr-B-N Coatings by Unbalanced Mangetron Sputtering
G5
Plasma-Assisted Electrostatic Cleaning of Contamination for Nanoimprint Lithography
Large Area ZnO:Al Contacts for Thin Film Silicon Solar Cells
Current Developments Regarding Continuous Industrial Large Area EB-PVD Processes Including the Introduction of Plasma Activated Process Combinations
Experimental Results for the Substrate Cooling During High-Rate PVD
Combination of Hollow Cathode- and Vacuum Arc Plasma for TiAlN- Thin Film Deposition
New Trends and Developments in Large Area PVD Coating of Metal Strips in Europe
Electron Beam Induced Bias for High Speed, High Conductivity Coating of Ultra Thin Capacitor Web
TS3
Thin Film Coating Technologies for Ceramic High Temperature Fuel Cells
Investigating Hybrid Filtered Arc Plasma Source Ion Deposition Technologies to Deposit Nanostructured Functional Coatings on Ferritic Stainless Steels. Part II: Simulated Solid Oxide Fuel Cell Interconnect Performance
Oxidation Resistance at 800°C for Magnetron-Sputtered CrAlN Coatings on 430 Steel*
Chromium Volatility of Coated and Uncoated Steel Interconnects for SOFCs
Metallic Interconnects for SOFC: Characterisation of Corrosion Resistance in H2/H2O Atmosphere at Operating Temperature of Differently Coated Metallic Alloys
Conductive Protection Layers on Ferritic Stainless Steels for SOFC Interconnect Applications
Synthesis of SOFC Cathode Material Coatings by Reactive Co-Sputtering of Metallic Targets
Electrolyte Coating on Micro-Tubular SOFC's
Processing of YSZ Electrolyte Coatings by Using Electrophoretic Deposition for Solid Oxide Fuel Cells
Sessions | Time Periods | Topics | Schedule Overview