Erosion and FOD of TBCs: Mechanisms, Maps and Models

Experiences with Improving Toughness in Low κ Thermal Barrier Oxides Based on ZrO₂-GdO_1.5

Thermal Cycling Behavior of Lanthanum Zirconate as EB-PVD TBC on Modified NiAl Alloy

Parameters Affecting TGO Growth and Adherence on MCrAlY-Bond Coats for TBCTs

Oxidation Resistant Coatings in Combination with Thermal Barrier Coatings on γ-TiAl Alloys for High Temperature Applications

Effect of Impurities on the Properties of Thermal Barrier Coatings

Buckling Delamination in Compressed Multilayers on Curved Substrates with Accompanying Ridge Cracks

Thermal Cycling Lifetime and Microstructural Development of Thermal Barrier Coatings with Air Plasma Sprayed NiCoCrAlY Bond Coats

Chemical Vapor Deposition of Transition Metal Diborides from Single Source Precursors

Microwave Atmospheric Plasma Technology for Surface Treatment and Reactive Coating on Steel Surfaces

High Temperature Processing of Poly-SiC Substrates from the Vapor Phase for Wafer-Bonding

TiN/SiN_x Multilayer Coatings by Chemical Vapor Deposition in a Fluidized Bed Reactor at Atmospheric Pressure (AP/FBR-CVD)

Vapor Growth of SiC Bulk Crystals and its Challenge of Doping

TEM Investigation of CVD TiN/κ Alumina Multilayer Coatings

CVD Deposition and Characterization of Coloured Al₂O₃/ZrO₂ Multilayers

Nanoindentation Hardness and Microstructure of CVD α-Al₂O₃ and -Al₂O₃ Coatings

Aluminium Coating Modified with Hf on Ferritic Steels by CVD-FBR Technology

Al-Mn CVD-FBR Protective Coatings for Hot Corrosion Application

Mechanical Stresses in Catalytic Chemically Vapour Deposited Polycrystalline Silicon Films

Combination of Coating and Heat Treatment Processes

Study on the Effects of Microblasting on the Topography of Cemented Carbide Tools

Surface Pre-Treatment and Duplex Technology

Duplex Plasma Nitriding and Nanostructured TiAlN/CrN PVD Coating

The influence of Substrate Preparation on the PVD Coating Graded Zirconium Carbide (ZrCg)

Improvements on the Wear Resistance of High Thermal Conductivity Cu Alloys Using an Electroless Ni-P Coating Prior to PVD Deposition

Effect of Heating Post-treatments on Nitrided Stainless Steel

Modeling, Production and Characterization of Duplex Coatings (HVOF and PVD) on Ti6Al4V Substrate for Specific Mechanical Applications

Introduction to Special Forum

Selective Synthesis of Carbon Nanotubes in a Large Scale and their Applications

The Nano-Carbon: Potential and Practical Applications with Business Models

A Flat-Panel Lamp Based on Carbon Nanotube Field Emission

Effect of Ar Neutral Beam Treatment of Carbon Nanotubes for Enhanced Field Emission

Field Emission Characteristics of Chromium Carbide Capped Carbon Nanotip

Magnetic Data Storage Devices Using Carbon Nanotubes

The Relationship Between Strain Generation and Relaxation, Composition and Electrical Performance in Strained Si/SiGe MOS Technology

The Extended Hertzian Theory for Normal and Lateral Loads Applied to the Determination of Intrinsic Stresses via Indentation Experiments - an in Principle Feasibility Study

Determining Viscoelastic Properties from Instrumented Indentation

Nanocontact Morphology Model Considering Surface Roughness During Nanoindentation

On the Relationship Between Plastic Zone Radius and Residual Depth During Nanoindentation

Numerical Analysis on the Contact Stresses Developed During the Indentation of Coated Systems with Substrates with Orthotropic Properties

Elastic Properties of Polycrystalline Gold Thin Films: Simulation and X-Ray Diffraction Experiments

Determination of Young's Modulus and Yield Stress of Porous Low-k Materials by Nanoindentation

Improvements on Industrial Adhesion Evaluation for PVD and PACVD Coatings

Bioactive Thin-Film Coatings: A Review

Mechanical, Tribological, and Heamocompatibility Properties of ZrN-Ag, ZrN-Au, and ZrN-Pd Nanocomposite Films

Investigation of Mechanical and Biological Properties of Surfaces and Coatings Treated by Intense Ion Beams for In-body Applications¹

Effect of Aluminum on the Corrosion Characterization of the NiTiAl Thin Film

Thin Coatings in Dental Application Against Fretting Wear

In Vitro Corrosion and Wear-Corrosion Resistance of Pulsed Plasma Nitrided 304 AISI Stainless Steel

In-Situ Real Time Sputtering Source Health Monitoring Using Ultrasonics

Effect of Various Substrates on Electrical Resistance and Thermo-Electric Power of Physical Vapor Deposited Tellurium Thin Film

Effect of Mechanical Strain on the Performance of P-Channel Poly-Silicon TFT Fabricated on Metal Foil Substrate

Fabrication of Copper Gate Electrode by Selective Electrodeposition Through Mask for Thin-Film Transistors

Development of a New Magnetoelastic Thin Film Gas Sensors for Humid Environment

Amorphous Germanium Thin Films for Negative Electrode in Lithium-ion Microbatteries

Fabricating Highly Active Mixed Phase TiO₂ Photocatalysts by Reactive DC Magnetron Sputter Deposition