ICMCTF2006 Thursday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
Session | Thursday, May 4, 2006 | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
8:30 AM | 9:30 AM | 10:30 AM | 11:30 AM | |||||||||
A3-3 |
Microstructural Observations of As-Prepared and Thermal Cycled NiCoCrAl Y Bond Coats
|
USAXS-Analysis of Electron-Physical Vapour Deposited Thermal Barrier Coatings and Application of Void Structure Modeling to Determine the Influence of Process Parameters on the Thermal Conductivity
|
Delamination-Indicating Thermal Barrier Coatings Using Rare-Earth-Doped Luminescent Sublayers
|
Development of Residual Stress and Damage in Thermal Barrier Coatings
|
Evolution in Photoluminescence and Electrochemical Impedance with Microstructural Changes in Thermal Barrier Coatings
|
Determination on Non-Contact Sensing of T BC/BC Interface Temperature in a Thermal Gradient
|
Effects of Long Term, High Temperature Aging on Luminescence from Doped YSZ Thermal Barrer Coatings
|
Infiltration-Inhibiting Reaction of Gadolinium Zirconate TBCs with Molten CMAS
|
||||
B1 |
Fundamental Understanding and Development of Nanostructured Ti-Al-Si-N and Zr-N-O Thin Films
|
Multi-Component Nitride Coatings Derived from Ti-Al-Cr-Si-V Target in RF Magnetron Sputter
|
Influence of Nitrogen on the Microstructure and Nanomechanical Properties of TaSiN Thin Films by Magnetron Reactively Co-Sputtering
|
Reactive Gas Effects in Pulsed Magnetron Sputtering: Time-Resolved Investigation
|
AC Powered Reactive Magnetron Deposition of Indium Tin Oxide (ITO) Films from a Metallic Target
|
The Effect of Pulsed Magnetron Sputtering on the Structure and Mechanical Properties of CrB2 Coatings
|
Preparation and Characterization of Non-Evaporable Porous Ti-Zr-V Getter Films
|
An Analysis of Target Processees in Reactive Magnetron Sputtering
|
Monitoring and Control During Deposition of AlN Films by a PVD Process
|
|||
B8-1 |
Materials Aspects of the Nanoscale Thin Film Design
|
Grain Size Evaluation of Pulsed TiAlN Nanocomposite Coatings for Cutting Tools
|
Hardening Effects in Annealed EB-PVD Nanocomposite TiAlBN Films
|
CrAlYN/CrN Superlattice Coatings Deposited by the Combined High Power Impulse Magnetron Sputtering / Unbalanced Magnetron Sputtering Technique
|
Comparison of Cr1-xAlxSiyN and Ti1-xAlxSiyN Coatings Prepared by Arc Evaporation
|
Microstructures, Mechanical Properties, and Tribological Properties of Ti-Si-B-C-N Nanocomposite Films by DC Unbalanced Magnetron Sputtering
|
Growth and Characterization of Epitaxially Stabilized SiNx in TiN/SiNx Multilayer Films
|
Pulsed Sputter Deposition of Binary and Ternary Oxides in the Systems Si-O, Cr-O and Al-O
|
Tribological Performance of Nano-Structured Ti-Si-N Films Syntheized by Cathodic Arc Evaporation
|
|||
D3-2 |
Electronic Applications of Carbon Nanotubes
|
The Origin of Hysteresis in Field-Modulated Transport in Carbon Nanotube Field-Effect Transistors: Experiments, a Model, and Implications
|
Negative Differential Conductance in Single Wall Carbon Nanotubes at Room Temperature
|
Electronic Structure and Thermal Stability of Nitrogenated MWCNTs Probed by NEXAFS Spectroscopy
|
Finger Prints in Raman Spectra of Structurally Modified Carbon Nanotubes
|
Structural, Compositional, Mechanical Properties of Carbon Nanotube Reinforced Zirconia Matrix Nanocomposite Films by Sol-Gel Process
|
Fullerene-Like CPx; a First-Principles Study of the Relative Stability of Precursors and Defect Energetics During Synthetic Growth
|
|||||
E3-3 |
Adhesion and Fracture of ALD Films and Nanolaminates Under Sliding Contacts
|
Interface Cracking Behavior of Zinc Coatings on Steel: Experiments and Finite Element Calculations
|
Gas Barrier Properties and Anomalous Fracture Mechanics of Thin DLC Films Coated on Flexible Polymer Surfaces
|
Adhesion Improvement of Copper (CU) on Carbon (C) by Plasma Treatment and Molybdenum (Mo) Interlayers
|
Interface Fracture Energy of Cu/Polyimide Laminate for Flexible Print Circuit - Determination by a New Technique
|
Mechanical Properties of ITO Film Deposited on Polymers Treated by Linear Ion Source
|
Nano And Micro Tribo-Mechanical Testing of Thin Films
|
The Effect of Nitrogen Ion Implantation on the Mechanical and Tribological Properties of Chromium Electroplated by Different Processes
|
Tribological Behavior of Hafnium Diboride Thin Films
|
Behaviour of Shot Peening + WC-Co HVOF Sprayed Coating Under Complex Fretting Wear and Fretting Fatigue Loading Condiitons
|
Microstructure, Mechanical and Tribological Properties of Cr1-xAlxN Films Deposited by Pulsed Closed Field Unbalanced Magnetron Sputtering (P-CFUBMS)
|
Deposition and Mechanical Properties of Cr-B-N Coatings by Unbalanced Mangetron Sputtering
|
G5 |
Plasma-Assisted Electrostatic Cleaning of Contamination for Nanoimprint Lithography
|
Large Area ZnO:Al Contacts for Thin Film Silicon Solar Cells
|
Current Developments Regarding Continuous Industrial Large Area EB-PVD Processes Including the Introduction of Plasma Activated Process Combinations
|
Experimental Results for the Substrate Cooling During High-Rate PVD
|
Combination of Hollow Cathode- and Vacuum Arc Plasma for TiAlN- Thin Film Deposition
|
New Trends and Developments in Large Area PVD Coating of Metal Strips in Europe
|
Electron Beam Induced Bias for High Speed, High Conductivity Coating of Ultra Thin Capacitor Web
|
|||||
TS3 |
Thin Film Coating Technologies for Ceramic High Temperature Fuel Cells
|
Investigating Hybrid Filtered Arc Plasma Source Ion Deposition Technologies to Deposit Nanostructured Functional Coatings on Ferritic Stainless Steels. Part II: Simulated Solid Oxide Fuel Cell Interconnect Performance
|
Oxidation Resistance at 800°C for Magnetron-Sputtered CrAlN Coatings on 430 Steel*
|
Chromium Volatility of Coated and Uncoated Steel Interconnects for SOFCs
|
Metallic Interconnects for SOFC: Characterisation of Corrosion Resistance in H2/H2O Atmosphere at Operating Temperature of Differently Coated Metallic Alloys
|
Conductive Protection Layers on Ferritic Stainless Steels for SOFC Interconnect Applications
|
Synthesis of SOFC Cathode Material Coatings by Reactive Co-Sputtering of Metallic Targets
|
Electrolyte Coating on Micro-Tubular SOFC's
|
Processing of YSZ Electrolyte Coatings by Using Electrophoretic Deposition for Solid Oxide Fuel Cells
|