Relationships Between Bond Strength, Bond Stress and Spallation Mechanisms of Thermal Barrier Coatings

Upper Temperature Limitation for the Functionality of Yttria Partially Stabilized ZrO₂ for Thermal Barrier Coatings

Developments in Materials and Manufacturing Technologies for Thermal Barrier Coatings Resulting From the Advanced Turbine Systems Program

Thermophysical Properties of Thermal Barrier Coatings

The Measurement of Strains Within the Bulk of Aged and As-Sprayed Thermal Barrier Coatings Using Synchrotron Radiation

Physical Properties of Thermal Barrier Coatings Studied in Situ by High Temperature X-ray Diffraction

Effects of Deposition Temperature and Thermal Cycling on Residual Stress State in Zirconia Based Thermal Barrier Coatings

Developments in Plasma Nitriding: Low Pressures and High Ion Energies

Deposition of Tungsten Thin Films by Inductively Coupled Plasma Assisted CVD

Remote Microwave Plasma Enhanced Chemical Vapour Deposition of Alumina on Metallic Substrates

Influence of Current Density and Gas Flow on the Growth of TiN in Different Sized PACVD Reactors and the OES Measurements

New Coatings and PACVD Technology

Deposition of Zirconia Thin Films by Inductively Coupled Plasma Assisted CVD

Intensified Plasma-Assisted Nitriding of AISI 316 Stainless Steel

Mo Ion Implantation as a Catalyst in the Diode and Triode Ion Nitriding of Al and Ti

Ion Nitriding of Aluminum - the Influence of Oxygen on the Nitriding Kinetics

Plasma Monitoring of Plasma Assisted Nitriding of Aluminium Alloys

Recent Technologies and Advances in Thin Film and Coating Characterization Using Atomic Force Microscopy (AFM)

Structure and Properties of Sputtered TiAl-M (M=Ag,Cr) Thin Films

CrN Coating on Mild Steel with Modified Interlayer of Electroless Ni Plating

Temperature Dependence of Thermal Expansion Coefficient and Bi-axial Modulus of Arc-ion Plated TiN, CrN, Cr₂N and AlTiN Coatings.

The Deposition of Compounds within the N,Ti Mixed Layer

In-Situ STM Studies of the Evolution of Surface Morphology and Microstructure in Epitaxial TiN(001) Grown by Ultra-High-Vacuum Reactive Magnetron Sputtering

Mechanical Behaviour of Nanostructured W-Si-N Sputtered Films

Improvement of the Mechanical Performance of (W-C/N)-Based Coatings by Ti Addition

Properties of Zirconium Oxide Thin Films Deposited by Pulsed Reactive Magnetron Sputtering

Development of Model-Based Process Control of Complex Thin Film Structures

Physical Properties of Reactively Sputtered Aluminum Nitride

Deriving the Kinetic Parameters for Pt-Silicide Formation From Temperature Ramped In Situ Ellipsometric Measurements

Temperature Controlled Vacuum Arc Deposition

Process Monitoring in Low-Temperature PECVD of Silicon Oxide Films by IR-RAS Method

Space-Polymer Materials Degradation in Oxygen Plasma and Ultraviolet Light Studied by In-Situ and Ex-Situ Spectroscopic Ellipsometryⁿ

In-situ Spectroscopic Ellipsometry as a Surface Sensitive Tool to Probe Thin Film Growth

Effects of D.C. Bias Voltage on the Formation of Interfacial Layer of Diamond on Silicon by MPECVD Synthesis

Formation of Intermetallic Cobalt-Phases in the Near Surface Region of Cemented Carbides

Improvements in the Properties and Structure of Diamond Films Deposited by Pulsed Bias Enhanced Hot Filament Chemical Vapour Deposition

Microwave Plasma Chemical Vapor Deposition of Diamond Films And Fabrication of Diamond Film for Micro Electro Mechanical Systems (MEMS)

Mechanism of Intrinsic Stress Generation in High Quality CVD Diamond Films

Low Temperature Selective Deposition of Diamond Film

Comparison of FTIR-Emission Spectra From Diamond and Diamond-like Films

High Rate Deposition of Diamond Like Carbon Film by Magnetically Enhanced Plasma CVD System

The Structural and Emission Characteristics of Unhydrogenated Amorphous Carbon Film by Pulsed Laser Deposition

Measurement of Elastic Properties of Diamond-like Carbon Films

Tribological Properties of Nanocrystalline Diamond Films

Preparation of Diamond Film by HFCVD of Camphor in Methyl Alchohol

Friction and Wear Performance of Diamond-like Carbon Films Grown in Different Source Gas Plasmas

The Role of CN Chemical Bonding on the Tribological Behavior of CN_x Coatings

Tribology and Surface Chemistry of Low Stress Hydrogen-Free Amorphous Diamond-Like Carbon^*

The Friction Characteristics of Hydrogen-free and Hydrogenated Hard Carbon Films in Dry and Humid Atmospheres

Effects of Direct Current and Pulse-Plating on the Co-Deposition of Nickel and Nanometer-Diamond Powder Coatings

Fine Polishing of Diamond Film Via a Thinning Process Using Fe, Ni, Cr Alloys and a Dry Grinding Process Using a Synthetic Diamond Powder

Commercialization Barriers for Engineered Surfaces: Opportunities in the Advanced Technology Program

Scale-up of Pulsed Laser Deposition - Is it Ready?

Applicability of Different Hard Coatings in Dry Machining an Austenitic Steel

Extended Application Ranges by New Hard/Lubricant Tool Coating

High Volume PVD Coating of Precision Components of Large Volumes at Low Process Costs

Technology Insertion: Replacement of Electroplated Chromium With HVOF Thermal Spray Coatings in Manufacturing and Maintenance of Military Aircraft

Commercialization of Ion Beam Deposition Systems for Multilayer Coatings and Diamond-like Carbon Deposition

Diamond-like Carbon Coatings Prepared in a Bipolar Pulsed D.C. Plasma

Deposition, Microstructure and Abrasive Wear Behavior of Al-Cu-Fe Quasicrystalline Coatings

Surface Energy of Al-Cu-Fe Intermetallics

Microstructure and Tribological Behaviour of (Al-Cu-Fe) Based Quasicrystalline Films Deposited by Means of Magnetron Sputtering

Potential Applications of Quasicrystalline Coatings and Thin Films

Interesting Properties of Films Composed of Very Small Grains Formed From a High-Rate Nanoparticle Beam