Mechanical Properties of Zirconia Thermal Barrier Coatings Measured using Instrumented Indentation

Strain Gradients in Plasma Sprayed Zirconia TBCs

Mechanical and Thermophysical Properties of Thick PYSZ Thermal Barrier Coatings - Correlation with Microstructure and Spraying Parameters

Microstructure Formation in Plasma Sprayed Functionally Graded NiCoCrAlY/Yttria Stabilized Zirconia Coatings

Break

Phase Stability in Scandia, Yttria-stabilized Zirconia TBCs

Sintering and Creep Behavior of Plasma-Sprayed Zirconia and Hafnia Based Thermal Barrier Coatings

Review of Ion-Assisted Pulsed Laser Deposition of Cubic-BN and Other Hard Materials

PLD Growth of Boron Nitride Using an Inductively Coupled RF Nitrogen Plasma Source

Enhancement of the Properties of Pulsed Laser Deposited Carbon Nitride by the Synchronization of Laser and N₂ Gas Jet Pulses.

Pulsed Laser Deposition Plume Species Effects Due to Double Excimer Laser Pulses

Fluorine-doping of ZnO Films in Reactive Dual-laser Ablation

High-rate Laser Deposition of Ceramic Coatings

Investigation Into 3-Dimensional Laser Processing Of Tribological Coatings

High Wear Resistant Surface Coatings on Ti-Alloys Prepared by Combination of Laser-assisted Gas-alloying and Arc Deposition

Low Temperature Pulsed Laser Deposition of Titanium Carbide Thin Films on Bearing Steels

The Effects of Substrate Properties on Metal Deposition from Liquid Media by Laser Chemical Vapor Deposition (LCVD)

Optical Properties of Chiral and Porous Thin Films

Correlation of Predicted and Observed Optical Properties of Multilayer Thermal Control Coatings

Processing Directed Chemical State Alteration in Doped ZnO Films

Dependence of the Sheet Resistance of Indium-Tin-Oxide Thin Films on Grain Size and Grain Orientation Determined from X-ray Diffraction Techniques.

In-situ and Ex-situ Ellipsometric Characterization of the Interface Between Plasma Deposited Si-Compound Films and Polymer Substrates.

Fabrication of Durable Protected and/or Enhanced Gold Reflectors

Optical Properties of Sputtered Oxide Materials

Investigation of Light-emitting DLC Coatings by Time Resolved Photoluminescence

Deposition Rate Effects on the Properties of Highly Tetrahedral Amorphous Carbon (ta-C).

Development of Adherent Diamond Coatings on Titanium Alloy

Fracture Strength in High Temperature of Free Standing CVD Diamond Films

The Investigation of Thermal Effect on the Properties of Pulsed Laser Deposited Diamond-like Carbon Films

Thermal Diffusion in MD Simulations of Thin Film Diamond Deposition

On the Hardness of a-C:H Films Prepared by the Methane Plasma Decomposition

Structural Investigations of Silicon Carbide Films Formed by Fullerene Carbonization of Different Substrates

Fracture Toughness Testing and Toughening Mechanisims of Some Commercial Cobalt-free Hardfacing Alloys

Wear-Resistant Monolithic and Multi-layered Cr/Cr₂N/CrN Based Films for Temperature Sensitive Substrates

Fabrication, Characterization, and Testing of Hybrid Bearings Containing TiC-coated Balls

Microstructural Changes in DLC Films Due to Tribological Contact

Characterization of Multilayered Ti/TiB₂ Coatings on Cemented Carbides

Some Effects of Ion Beam Treatments on Titanium Nitride Coatings of Commercial Quality

Wear Behavior of High Energy Plasma Sprayed Nanoscale WC-Co Coatings

A Comparative Study of the Influence of Triode Plasma Treatments, PVD TiN, CrN and Duplex Coatings and Ion Implantation on the Impact and Abrasive Wear resistance of Ti-6Al-4V

Tribo-Contacts On Compliant Substrates: Hard Coat Design Incorporating Frictional Dissipation

Comparison of Mechanical Properties of TiN Thin Films Using Nanoindentation and Bulge Test

The Mechanical Properties of Polycrystalline Silicon Carbide Films using Bulk-Micromachined Diaphragms

Mechanism for Stress Relaxation in Si-rich Silicon Nitride Thin Films

Mechanical Behaviour of Submicron Multilayers Submitted to Microtensile Experiments

The Effects of Particle Pollution on the Mechanical Behaviour of Multilayered Systems

Mesomechanical Studies of Coated Materials

Substrate Preparation and Stud Pull Adhesion of Metal Films on Graphite-Epoxy Composites

Influence of Nitriding on the Microstructure, Toughness, and Thermal Stability of Modern and Conventional Hot Forging Die Steels

Examination of General Mechanical Properties and Failure Mechanisms of W, Hard W(C) and W/W(C) Bilayer Coatings

The Design of Gas Distribution Systems for Large Area Plasma Deposition and Treatment Equipment.

The Hollow Cathode - a High Performance Tool for Plasma Activated Deposition

Hollow Cathode-Assisted Arc Plasma Processing

RF Hollow Cathode Arrays for Low Temperature Plasma Procesing

Effect of Magnetic Field Configuration on the Performance of the Hollow Cathode Linear Arc Discharge (LAD) Source.

Experiments and Modelling of Combined PVD- and CVD-Processes Using a Hollow Cathode Arc Discharge Plasma

Surface Functionilization of Polymer Films and Webs using Atmospheric and Subatmospheric Plasmas

Optimisation of Reactive Deposition in a Hollow Cathode Arc Equipment

Double Layer Coating by Hollow Cathode Discharge Ion Plating

Advanced Contact Metallization for Logic and Memory Applications

Synchrotron X-ray Diffraction Studies of Interfacial Reaction Paths and Kinetics in Al/TiN Bilayer Structures

Contact resistance in Copper Metallization

Characterization of Multilayered Ti/TiN Films Grown by Chemical Vapor Deposition

Low Parasitic Resistance Contacts for Scaled ULSI Devices

Materials Science Issues of Ultra-Shallow Junction