ICMCTF 2023 Wednesday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Wednesday, May 24, 2023 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8:00 AM | 9:00 AM | 10:00 AM | 11:00 AM | 12:00 PM | ||||||||||
| A2-2-WeM |
On the Suitability of MoNbTaW Based Thin Films to Act as Diffusion Barriers
|
Improvement of EBC Performance by Controlling Driving Forces for Mass Transfers in Oxides
|
Steam Oxidation Kinetics of Si / Modified Yb2Si2O7 Environmental Barrier Coatings on SiC/SiC Ceramic Matrix Composites at 1250 oC – 1350 oC
|
Raman Spectroscopic Investigation of SiO2 TGO Phase Transformation and Si and SiC Substrate Stress
|
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
|
Hot Section Coating Technology as an Enabler for Sustainable Propulsion
|
Development of Tantalum Coating by the Cold Spray
|
|||||||
| B3-WeM |
ta-C by Magnetron Sputtering Using a Newly Designed Cylindrical Rotating Cathode with Significantly Enhanced Sputter Power Density
|
High Performance ta-C Coatings with Enhanced Temperature Stability for Industrial Applications
|
DLC Coatings for Mechanical Seals Applications
|
|||||||||||
| C1-1-WeM |
Large-Scale Manufacturing Techniques for Metamaterials and Their Industrial Applications
|
High-Rate Deposition of Calcium Fluoride Coatings Using Radio-Frequency Magnetron Sputtering
|
Reactive Sputter Deposition of Nanoporous Black Zinc and White Zinc Oxide Coatings
|
High Hall Mobility W-Doped In2O3 Conductive Films with Thicknesses of Less Than 10 Nm Deposited on Glass Substrates
|
The Effects of Growth and Post-Annealing Temperatures on MoS2 Thin Films Deposited by Magnetron Sputtering
|
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
|
||||||||
| E1-2-WeM |
Coatings and Composites for Extreme Environments Lab (CE)2
|
Tribological Behavior of Mos2 Based Coatings Under Different Sliding to Rolling Lubricated Contact Conditions
|
Catalytic Transformation of Lubricants to Wear-Protective Tribofilms on Selected Steel Surfaces During Sliding
|
Aromatic Compounds as Sustainable Lubricants for Iron
|
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
|
How Efficient Is the Self Adaption Concept for Low Friction with TMD-Based Sputtered Coatings
|
Self-Lubricating Titanium Alloys: Design and High Temperature Tribological Performance Up to 800 °C
|
Electrodeposited of Silver Nano-Particules Plant Based to Improve Lubrication of Composite Films
|
||||||
| G1-WeM |
Improve Cutting Performance of Carbide Cutting Tools with Multilayer TiAlxN-Based Arc-Cathodic PVD Coating for Industrial Applications
|
Correlation between Deposition Conditions, Properties and Cutting Performance of Al-Rich AlCrN Wear Protective Coatings Produced by Reactive Arc Evaporation
|
Designed for Impact: Successful Forming of 3rd Generation Advanced High Strength Steels in Electric Vehicles’ Body-in-White
|
In-Situ Incorporation of Nanocontainers During Plasma Electrolytic Oxidation
|
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
|
|||||||||
| G2-1-WeM |
Enhanced Tool Surface Properties Against Adhesion in Aluminum Forging
|
Evaluation of Permanent Thin-Film Coatings Applied to Die Surfaces to Reduce Lubricant Use during Aluminum Forging Operations
|
||||||||||||
| G3-WeM |
A Novel AlCr-Based PVD Coating Design for Threading Operation of Super Duplex Stainless Steel
|
Property and Deposition Technology for Highly Al-Containing AlCrN Coatings by Arc Ion Plating
|
Challenges and Target-Oriented Paths to Maintenance-Free High-Performance Progressive Dies Using HiPIMS-Coatings
|
Oxidation and Wear Behavior of CrAlMoN with Varied Mo-content for Cutting TiAl6V4
|
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
|
The Significance and Application Area of CVD TiCN/Al2O3 based Coatings for Today’s Cutting Tools
|
Indentation and Sliding Contact Testing of Three Laser-textured and PVD-coated Cemented Carbide Tools
|
|||||||
| G4-WeM |
Water-Repellent and Low Emissivity Coatings on Fabric Prepared by Roll-to-Roll Hollow Cathode PECVD and Magnetron Sputtering
|
Amorphous Carbon Coatings on Glass for High Voltage Protection
|
Plasma Pretreatment of Small Parts and Granular Materials in Bulk Vacuum Coating
|
|||||||||||
| H2-2-WeM |
The Nature of Defects and their Dynamics Characterized using Scanning Electron Microscopy Approaches
|
Measurement of Hardness and Elastic Modulus by Depth Sensing Indentation: Improvements to the Technique Based on Continuous Stiffness Measurement
|
Ultrasonically Induced Nanofatigue During Nanoindentation
|
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
|
Comparison of Electrical and Image-Based Sensing for Quantitative in Situ TEM Nanomechanical Testing
|
Understanding the Interface Strain Induced hcp-to-bcc Phase Transformation in Nanolaminate Mg
|
||||||||
| H3-2-WeM |
Characterizing Interfacial Straining Mechanisms Using High Temperature in situ Tem
|
Quantitative in Situ TEM Observations of a Grain-Boundary-Migration-Assisted, Radiation-Damage Healing Mechanism in Ultrafine Grained Au Thin Films
|
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
|
|||||||||||