ICMCTF 2023 Wednesday Afternoon

Impact of Selective Acceleration of High-mass Ions - Low Temperature Growth of Stress-free Single Phase α-W Films

Modeling of High Power Impulse Magnetron Sputtering Discharges with Tungsten Target

Combinatorial Deposition of Highly Oriented AlScN Films Using Synchronized-HiPIMS for Piezoelectric Applications

Fabrication of TiZrNbTaFeBN Coatings Using Superimposed HiPIMS-MF Systems: Mechanical and Chemical Properties Evaluation

Effect of Synchronous Bias Mode with Different Duty Cycles on Microstructure and Mechanical Properties of AlTiN Coatings Deposited by HiPIMS Process

Bipolar HiPIMS: A New Route to Deposit Advanced Coatings on 3D Complex Geometries

On the Control of the Composition of NbC Films Deposited by HiPIMS from a Compound Target: Plasma Diagnostics

Comparative Study of DC and HIPIMS Discharge Characteristics of Cylindrical Magnetron in Open and Confined Space

Optimization of Si Addition on AlTiN and AltiCrN Coatings Synthesized by Hipims for the Stability of the Mechanical and Thermal Properties and Development of a Multilayer Architecture Coating

Perovskite Stannate BaSnO₃ Films for Near- and Mid-Infrared Plasmonic Applications

2-Dimensional Growth of GaS_x Crystal by Low-Pressure Vapor Phase Deposition

Hysteresises on Voltage-Current Characteristics and Optical Responses of PEDOT:PSS/ZnO Nanorods/ZnO:Ga Heterojunctions

Femtosecond Laser Ablation (FESLA) XPS – A Novel XPS Depth Profiling Technique for Optical/Electrical Thin Films and Multi-Layered Structures

Hard MoSC Solid Lubricant Coating

Coating Solutions for Wind Turbine Bearings

Scratch Testing and Tribology Combined with Integrated 3D-Profilometry for in-Depth Characterization of Damage Modes in PVD Coatings

Structural, Electrochemical, and Tribological Evaluation of Silver - Hydroxyapatite Multilayer Coatings Obtained by Magnetron Sputtering with Potential Application in Implants

Improving the Oxidation Resistance of TiB₂ Coatings by TM-silicide Alloying (TM = Ti, Ta, Mo)

Quaternary CrTaBN: Experimental and Theoretical Insights Into a Novel Coating Material with Promising Mechanical Properties and Exceptional Thermal Stability

Transition Metal Diboride Superlattices: Combination of Ab Initio and Experimental Approach for Investigation of Ceramic Thin Films with Improved Ductility and Fracture Toughness

Tissue Phase Affected Fracture Toughness of Nano-Columnar TiB_2+z Thin Films

Characterization of Ti-Al-La-B-N Hard Coating and Cutting Tool Application

Mechanical Properties and Thermal Stability of ZrBSiTaN Films

Formation of Orthorhombic MAB Phase Mo_1−xCr_xAlB Solid Solution Thin Films

Application of AlTiBN Coating for Cutting Tools for Exotic Materials Machining

Effect of Different Diffusion Treatments on the Surface Properties of Austenitic Stainless Steels

Fine-Tuning of PVD Conditions for Tools Used in Automotive and Manufacturing Applications

Development of Al₂O₃-B₂O₃-SiO₂ Glass for Space Shuttle Coating

Novel High-Entropy Alloy Powders and Their Thermal-Sprayed Coatings for High-Temperature Applications

A Facile Fluoride Sealing Treatment to Improve Corrosion Resistance of Magnetism Alloy (AZ31B) Micro-arc Oxidation Layer

Chemical Vapor Infiltration Technology for Coatings of Fibers and 3D Porous Bodies

Upscalable Nanomanufacturing of Thin-Film Electronics

Plasma Technologies for Sustainable Packaging Materials

Transition Metal Nitride Colloids: From PVD Targets to Laser-Ablated Nanoparticles

Fully Inkjet-Printed Gas Sensing Antenna Based on Carbon Nanotubes for Wireless Communication Applications

Towards Large Area Scalable Organic Solar Cells using Solution Processing