ICMCTF 2023 Tuesday Morning

Excellent Tribological, Mechanical, and Anti-Corrosion Performance of Agro-Waste as Corrosion Inhibitor for Carbon Steelin an Acidic Environment

Study of Materials and Coatings for Use in High Temperature CO₂ Environments

Sol-Gel Coating to Protect Materials Exposed Under Carbonates Used as a Thermal Energy Storage System in Central Tower Power Plants

Characteristics and Resistance of CVD Hafnium Carbide Coating in Extreme Environments

High Temperature Corrosion Protection of Zirconium Fuel Rods in Nuclear Reactors by Nanocrystalline Diamond (Ncd) Layers

Effect of Vacuum Annealing on the Residual Stress of ZrN Thin Film deposited on Ni-based Superalloy Haynes 282

Study at Pilot Plant Scale on Biomass Corrosion Resistance of FeCr and CoCrMo Coatings Applied by HVOF

Is It Meaningful to Quantify Vacancy Concentrations of (Ti,Al)N Thin Films Based on Laser-Assisted Atom Probe Tomography Data?

The Oxidation Behavior of VMoN Thin Films Deposited by High Power Pulsed Magnetron Sputtering

Correlation Between Microstructure and Mechanical Properties of B₄C Thin Films Deposited by Pulsed Laser Deposition

Evaluation of Fracture Toughness of Borided Materials by Cross-Sectional Scratch Testing

Stress Evolution in Binary Metal Alloy Systems

Molecular Engineering of Inorganic Thin Film Interfaces for Accessing Multiple Novel Properties for Diverse Applications

Empowering PVD-Coatings to Control the Time Dependent Chemical and Microstructural Coating Properties in Aqueous Electrolytes

Early Detection of Fretting-Corrosion at the Hip Modular Junction Interface by Acoustic Emission Non-Invasive Technique

Corrosion Evaluation of Plasma Electrolytic Oxidation Coatings on Titanium Alloys For Biomedical Implant Application

Fretting-corrosion (<5μm) Performance of Carbide-derived Carbon (CDC) Surface Modification for Hip Implants

Carbide-derived Carbon (CDC) for Implant Application: Tribocorrosion Kinetics and Mechanisms

PEKK as Biomaterials Under Fretting Corrosion Solicitations: May This Biopolymer Be Considered as New Hip Implant Component?

Carbon Based Coatings Deposited Over Aisi 4140 to Improve Wear Resistance in Machine Components

Tribological Behaviour of Diamond Coated Reaction-Bonded Silicon Carbide Under Dry and Seawater Environment

Friend or Foe? The Role of Oxygen in the Tribological Performance of Solid Lubricant MoS₂

Tribological Properties MoS₂-WC Duplex Coatings in Low Viscosity Hydrocarbons

Modification of Diamond Like Carbon (DLC) to Improve Specific Tribological Characteristics for Automotive Applications

Multifunctional Characterization of Nanomultilayers

Effects of Radiation Damage on the Critical Resolved Shear Stresses in Zirconium Alloys for Nuclear Applications

Link between Cracking Mechanisms of Trilayer Films on Flexible Substrates and Electro-Mechanical Reliability Under Biaxial Loading

Effect of Nanometric Stacking on the Magneto-Mechanical Properties of Thin Films on Flexible Substrate

Influence of the Aspect Ratio of the Micro-Cantilever on the Determined Young’s Modulus Using the Euler-Bernoulli Equation

Engineering Metal-MAX Phase Multilayered Nanolaminates for Tunable Strength and Toughness

High-Performance Rechargeable Zinc Ion Batteries: From Surface Modification of Zn Anode and Structural Engineered Cathode to Deep Eutectic Solvent (DES)-Based Electrolytes

A Novel One-step Hydroxide Coprecipitation Method to Synthesize Lix[Ni0.8Mn0.1Co0.1]O2 Cathode

Pb-Free Halide Perovskite/TiO₂ Heterostructure for Enhanced Solar-Driven PFC

Inline PVD Coating of Bipolar Plates for Electrochemical Energy Converters

Studies on the TiO₂ Thin Film on the Silicon Nanowire Arrays using Taguchi - Grey Method for Heterojunction Solar Cell

Impacts of Mutual Phase Interactions on Crystal Polarity and Photocatalytic Hydrogen Evolution Reactions

Systematic Investigation of the Piezocatalysis–Adsorption Duality of Polymorphic Mos₂ Nanoflowers

Improving Urea Oxidation Reaction Performance by Enhancing Gas Releasing