ICMCTF2019 Thursday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Thursday, May 23, 2019
1:20 PM 2:20 PM 3:20 PM 4:20 PM
A2-2-ThA
Design of Multiphase Environmental Barrier Coatings: Toward Multifunctional Molten Deposit Resistance
Comparison of Oxidation Procedures of MCrAlY Coatings Deposited by PVD Cathodic Arc Evaporation
Effect of APS Flash Bond Coatings and Curvature on Furnace Cycle Lifetime of Rods
Investigation of Thermally Grown Oxide Stress in Plasma-spray Physical Vapor Deposition and Electron-beam Physical Vapor Deposition Thermal Barrier Coatings via Photoluminescence Spectroscopy
Thermally Conductive and Electrically Insulating Epoxy Nanocomposites with Intercalation of Aluminum Nitride Nanoparticles into Exfoliated Graphite
Effect of Feedstock Species on Thermal Durability of Thermal Barrier Coatings
Development of Environmental Barrier Coatings for SiC/SiC Ceramic Matrix Composites via CVD
B2-1-ThA
Impact of HfO2 as a Buffer Layer on the Electrical and Ferroelectric Memory Characteristics of Metal/Ferroelectric/High-K/Semiconductor Gate Stack for Nonvolatile Memory Applications
Studies on Properties and Cutting Performance of Al-rich AlTiN Coating with Controlled Orientation via LP-CVD
Effects of Al Content and Growth Orientation on Mechanical Properties of AlTiN Coatings Prepared by CVD Method
Thermal Crack Network Formation in CVD TiCN/α-Al2O3 Coatings
Structural and Piezoelectric Properties of Chemical Vapor Deposited AlN Films on Metallic Substrates
Aluminum Nitride Based Coatings for High Temperature Solar Receiver Systems
Residual Stress and Quantitative Texture of CVD Al2O3 Coatings
Gas Source Chemical Vapor Deposition of Wafer-scale Mono- and few-layer MX2 (M=W or Mo and X=S or Se) and Their Alloys
The Effect of Dopants and Bilayer Period on Microstructure and Mechanical Properties of CVD Ti(B,C)N Hard Coatings
B5-1-ThA
Interfaces and Mechanisms: A Molecular Dynamics Approach to Fine Tuning Manipulation of Mechanical Properties
Preparation of Hard Yet Fracture Resistant W-B-C Coatings Using High Power Impulse Magnetron Sputtering
Analytical Modelling of Misfit Dislocation Formation in Superlattice Coatings and its Effect on the Fracture Toughness
The Electrical Response of PVD Deposited Nanocrystallited Carbon Film in Magnetic Field
Aluminium Nitride Based Piezoelectric MEMS: From Material Aspects to Low Power Devices
Superamphiphobic Surface Produced by Femtosecond Laser Patterning and Pulsed Plasma Polymerization
C4-ThA
Analytical Modelling of Propagation Velocity in Electron Transparent Nanolaminates
Twin-Wire Arc Coatings for Repair of Structural Components
Unstable Propagating Reactions in Sputter-Deposited Nanolaminates
Synthesis of Reactive Ni-Al Composites Using High Pressure Torsion
E1-2-ThA
Exploring the Nanomechanical Properties of Transition Metal Dichalcogenides using Density Functional Theory
Mechanics, Materials, and Design Problems in Medical Device Technology and Information Storage
Frictional Anisotropy of MoS2 During Sliding: A Molecular Dynamics Study on the Atomistic Understanding of Frictional Mechanisms
Effect of the Presence of Small Molecules on the Entangled Electronic and Dynamic Features in Layered MX2 Transition Metal Dichalcogenides: Systematic Quantum Mechanic Ab Initio Smulations
Nanoscale Frictional Properties of Ordered and Disordered MoS2
Electrical Tuning of Vibrational Modes in Transition Metal Dichalcogenides
On the In-situ Formation of Transition Metal Disulphides in Lubricated WN or WC Coating Contacts
Tribological Investigations of Coated Roller Finger Followers using Application Oriented Valve Train Test
Physical Understanding to Nano-friction of C:H/D Thin Films: Coupling Mechanism by Atomic-scale Vibration Damping
F2-2-ThA
HiPIMS Deposition of W Thin Films
Study and Development of Thermochromic VO2 Thin Films Deposited by HiPIMS
A Paradigm Shift in Thin Film Growth by Magnetron Sputtering: from Gas-ion to Metal-ion-controlled Irradiation
In Vitro and In Vivo Biocompatibility Evaluation of Zr-Ti-Si and Fe-Zr-Nb Thin Film Metallic Glasses
Microstructural and Tribological Properties of Sputtered AlCrSiWN Films Deposited with Segmented Powder Metallurgic Target Materials
Linking an Atmospheric-pressured Arc Reactor to a Magnetron Sputter Device to Synthesize Novel Nanostructured Thin Films
G4+
From Detailed Understanding to In Operando Studies of Coated Cutting Tools: A Successful and Long Term Collaboration between Industry and Universities
Electrolytic Plasma Polishing of Titanium Alloys
Characterization of Surface Modification Mechanisms for Boron Nitride Films under Plasma Exposure
Ultra-fast Decoating Method for PVD Coatings
Development of an Omni-phobic Spray Coating for the Oil and Gas Industry
Hybrid Reactive High Power Impulse Magnetron Sputtering System Combined with Electron Cyclotron Wave Resonance ECWR Plasma used for the Deposition of Semiconducting Thin Films.
Pre- and Post-Surface Treatments using Electron Beam Technology for Load-Related Application of Thermochemical and PVD Hard Coatings on Soft Substrate Materials
Black Oxide and Carbon-Based Coatings for Roller Bearing Applications
Sessions | Time Periods | Topics | Schedule Overview