ICMCTF2017 Wednesday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Wednesday, April 26, 2017 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8:00 AM | 9:00 AM | 10:00 AM | 11:00 AM | |||||||||
| A2-2 |
La-Sr-Mn Based Chromium Barrier Coatings for Interconnectors in Pressurized Steam Electrolysis on Exposure to Pure Oxygen and Water Vapor
|
Investigation of the Adhesion of Glassified Sand/salt Deposits on Thermal Barrier Coatings Exposed to High-temperature Combusted Gas Flows
|
Effect of Nanostructure and Composition on the Transient Oxidation Behavior of Nanograined Alloys
|
CrAlSiYN Coating with AlSiN Intermediate Layers for Enhanced Thermal Stability and Oxidation Resistance at Elevated Temperatures
|
Metallic Coatings on Copper for High Heat Flux Application in Rocket Engines
|
Mechanical Properties of ZrO2-Y2O3 Thermal Barrier Coatings by Isothermal Heat Treatment
|
Estimation Of The Mechanical Properties Of Thermal Barrier Coatings With Porous And Dense Vertically Cracked Microstructures By Modified Small Punch Tests
|
Comparison of Damage Evolution in High Purity Nano and a Conventional YSZ Thermal Barrier Coating during Thermal Cycling
|
Non-reactively Sputtered Ultra-High Temperature Hf-C and Ta-C Coatings
|
Impact of Substrate Surface Morphology on APS Ceramic Coating Adhesion Measured by Laser Shock Test (LASAT)
|
Influence of Pt Concentration on Structure of Aluminized Coatings on a Ni Base Superalloy
|
|
| B2-2 |
Investigation of Ti-based Hard CVD Coatings on Various Metals Suited as Alternate Binder Phase for WC-Co Cutting Tools
|
Hot Filament CVD Diamond Coatings on Cutting Tools for Hard to Machine Materials
|
Nanocluster Assisted Mesoplasma Epitaxial Bridging
|
Low Pressure Chemical Vapor Deposition of hex-BN: Relationship between Gas Phase Chemistry and Coating Microstructure
|
High-speed Structural Control for Functionalization of Various Oxide Films
|
Protective Coatings Enabled by Atomic Layer Deposition Processing
|
Chromium Carbide Growth at Low Temperature by a High Efficient DLI-MOCVD Process in Effluent Recycling Mode
|
Growth and Characterization of SiOx Thin Film Deposited by Plasma Enhanced CVD on a Magnesium Alloy
|
Electrochemical Behavior of Graphene Coatings Deposited on Copper Metal by Electrophoretic Deposition and Chemical Vapor Deposition
|
Characterization of Coated Silane Compounds on Aisi 304 Stainless Steel Using Plasma-Oxide Vapour as Adhesion
|
||
| B4-3 |
Aspects of Thermal Stability of TiAlN and ZrAlN
|
Effects of Treatment Temperature and Gas Blow Velocity of IH Nitriding on Microstructure of Titanium Alloy
|
Oblique Angle Deposition of Nanostructured ZrC Thin Film by Reactive Magnetron Sputtering and its Effect on Structure and Mechanical Property
|
The Influence of Al Content on Characteristics of CVD- Aluminum Titanium Nitride Films
|
Wear Resistance Capabilities of B-C-W Coatings
|
Micromechanical Properties and Wear Resistance of Quaternary TiAl(X)N Alloys (X=Nb, Cr or V)
|
High Resolution Lateral Force-displacement Measurements as a Tool for the Determination of Lateral Contact Stiffness and Poisson’s Ratio
|
Influence of a-Si:H Interlayer on the Adherence of a-C:H Coatings Deposited on Different Metallic Surfaces
|
Reactive Magnetron Sputtering of Transition Metal Nitrides for Electronic and Opto-Electronic Applications
|
Comparative Investigation of Zr-B-(N), Zr-Si-B-(N), and Zr-Al-Si-B-(N) Hard Coatings
|
Multiphysics Modelling and Experimental Investigation on the Characteristics of Laser Deposited Al-Sn-Si Coatings on Ti6Al4V Alloy
|
|
| E2-2 |
Study of Bauschinger Effect in Ni Thin Metallic Films Submitted to Cyclic Deformation
|
Mo-Re Thin Films for Flexible Display Applications
|
Rate Sensitive and Creep Behavior of Thin Metallic and Oxide Films: on Chip Testing and Activation Volume Analysis
|
Intrinsic Stresses - New Methods to Evaluate Them Using Enhancing Indentation Methods and New Models to Optimize Them
|
Investigation of Buckling Driven Delamination of DLC Coatings for Evaluation of Adhesion Strength
|
Characterization of Thin Films by Nanoindentation: Avoiding Mistakes during the Measurement and Data Analysis
|
Plasma Electrolytic Oxidation Coatings on AZ31 Magnesium Alloys with Si3N4 Nanoparticle Additives
|
Fractures, Wrinkles and Buckles in Brittle Multi-layers on Flexible Substrate
|
Combined XPS and Adhesion Studies of Metal - Polymer Interfaces for Space Applications
|
Mapping Adhesion Energy of Tungsten Based Barrier Layers with Scratch Induced Buckling
|
||
| F4-1 |
Development of Microstructure, Phase Composition and Residual Stresses during Plasma Electrolytic Oxidation (PEO) of Aluminium Alloys
|
Influence of Transition Metal Dopants on the Reactive Sputtering Process of Al2O3 Thin Films and their Oxidation Resistance
|
On the Phase Evolution of Al-Cr-based Intermetallics and Oxides Formed by Cathodic Arc Evaporation
|
Synthesis of Local Epitaxial α-(Cr1-xAlx)2O3 Thin Films (0.08 ≤ x ≤ 0.16) on α-Al2O3 Substrates by R.F. Magnetron Sputtering
|
Thermal Stability of Arc Evaporated Oxide, Nitride, Oxinitride, and Oxide/Nitride Coatings within the Systems Al-Cr-N and Al-Cr-O
|
Structural Evolution in Reactive RF Magnetron Sputtered (Cr,Zr)2O3 During Annealing
|
Ternary Oxide Coatings as High-temperature Solid Lubricants
|
High-rate Reactive High-power Impulse Magnetron Sputtering of Hf-O-N Films with Tunable Composition and Properties
|
Thin Films in the M-Si-O-N Systems
|
Diffusion between Silica Thin Film Deposited by Reactive Magnetron Sputtering and Glass Substrate during Annealing at High Temperature
|
Investigation of Sputtered Zirconium Oxide Thin Films Deposited at Different Oxygen Partial Pressure
|
|
| H3-1 |
Small-Scale Mechanical Testing on Ion Beam Surface-Modified Engineering Materials
|
High Temperature Nanoindentation up to 800°C: Experimental Optimization
|
Size-dependent Nanoscale Plasticity in Oxidation-strengthened Zr/Nb Multilayers
|
High Temperature Mechanical Properties Characterization of DLC Films
|
Aluminide Coatings on Thin-Walled Sheets – Mechanical Properties and Thermocyclic behaviour
|
Variable Temperature Micropillar Compression Transient Tests on Nanocrystalline Palladium-Gold: Probing Activation Parameters at the Lower Limit of Crystallinity
|
High Temperature Micro-Mechanical Testing of Aluminide Coatings
|
Temperature-dependent Interfacial Layer Formation during Sputter-deposition of Zr Thin Films on Al2O3(0001)
|
||||