ICMCTF2017 Tuesday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Tuesday, April 25, 2017
8:00 AM 9:00 AM 10:00 AM
A1-3
Thin Co and Ce/Co Coatings on Ferritic Stainless Steel Interconnects for Solid Oxide Fuel Cells
Long-term Oxidation of MCrAlY Coatings at 1000 ⁰ C and an Al-activity Based Coating Life Criterion
The Preparation of Ti2AlN MAX Phase Coatings and its Oxidation Mechanism under Different Atmosphere
Effect of Coating Architecture on the Corrosion Behavior of Ti-N/Cr-N Multilayer Coatings
Effects of Encapsulating Material and Healing Agent Ratio on Crack Propagation Behavior for Thermal Barrier Coatings
B1-3
Synthesis and Applications of High-precision Thin Film Multilayers
Influences of Frequency and Duty Cycle on the Mechanical Properties of TiCrBN Thin Films Grown by a Hybrid Superimposed High Power Impulse Magnetron Sputtering and Radio Frequency sputtering technique
Controllably Manipulating Adatom Mobility during PVD Deposition through Surface Acoustic Waves
Effects of Processing Parameters on the Fabrication of TiCrSiN Thin Films Deposited by a Hybrid HiPIMS and RF Sputtering System
Exploring the High-temperature Hardness of Nanocrystalline W-Ti Coatings
Growth Mechanism of Sputter Deposited Self-assembled Alternating Layered Metal Containing Hydrogenated Amorphous Carbon Film
Phase Formation in Sputter Deposited Tantalum Coatings
B4-1
Thermal Stability and Mechanical Properties of Sub-stoichiometric TiAlN Thin Films
Microstructure and Hardness of Ti-B-N-C Nanocomposites Deposited from Ti and B4C Targets
Strategies for Fracture Toughness Enhancement of Nanostructured Films by Microstructural and Grain-boundary Design: The Role of Microstructure, Stress and Property Heterogeneity
Epitaxial Growth of HfN Films using Synchronized Pulsed Substrate Bias during HiPIMS Discharge
HiPIMS and Ni Doping Induced Structure Reinforcement and Phase Change in nc-TiC/a-C:H Coatings
Correlation of Plasma Parameters and Thin Film Properties of HiPIMS Al-Cr-N films using a Combinatorial Approach
C1
Metamaterials: from Design and Modeling to the Experimental Confirmation of their Optical Performance
Use of FDTD Method for Data Analysis of Spectroscopic Ellipsometry Data of Non-periodic sub-wavelength Structures
Analysis Procedures for Multiple Sets of Ellipsometric Spectra
High Precision Absorption Measurements in Optical Films using the TRACK Method: Comparison with the Laser-induced Deflection
Durability and Wear Mechanisms of Easy-to-clean Coatings on Glass and Displays Assessed by in situ Tribometry
Insitu Metrology for Surface Topography and Stress Characterization
Scratch Failure vs Residual Stress: a Relationship Applied to Optical Coatings
Fast Characterization of nm Thin to Thick Coatings using Pulsed-Rf Glow Discharge Optical Emission Spectrometry
D3
Challenges for Polymeric Orthopedic Implants - Enhanced Surface Functionalities using coatings deposited by HiPIMS
Alginate Coatings on Silver-decorated Calcium Phosphate nanospheres as an Antimicrobial coating component
Manufacturing, Testing, and Regulatory Aspects of Implant Coatings
Implant Alloy Microstructure can Enable Cell Induced Corrosion in Total Hip Replacements
Characterization of Solid-supported Thin Films and Molecular Interactions using Multi-Parametric Surface Plasmon Resonance
Effect of Processing on the Structure and Biofuncionalization of AlN Thin Films Produced by r.f. Reactive Magnetron Sputtering
Effect of Zn on the Improvement of Corrosion Performance of MAO Coated Biodegradable Mg-Sr-Zn Alloys
Antimicrobial Silver Oxide Films with Rapid Bacteria Contact Killing
F2-1
An Ionization Region Model of the Reactive Ar/O2 High Power Impulse Magnetron Sputtering Discharge
Residual Stress Control of Al-rich (Ti,Al)N Hard Coatings by Pulse Duration in High Power Impulse Magnetron Sputtering
Energetic Deposition of Electronic Materials
Controlled Reactive HiPIMS of Thermochromic VO2 Films at a Low Deposition Temperature (300 °C)
High Power Impulse Plasma Magnetron Sputtering – Dawn of Industrialization
Comparison of CrN from Planar and Rotating Target using Highly Ionized Processes
Molybdenum Thin Films Deposited by High Power Impulse Magnetron Sputtering
Epitaxial Growth of Copper Thin Films on Si(001) by HiPIMS
Sessions | Time Periods | Topics | Schedule Overview