ICMCTF2017 Tuesday Afternoon

Property Comparisons of Air Plasma Sprayed and Dense Homogeneous Yttrium Disilicate

Performance of Vacuum Plasma Spray Bond Coatings

Predicting Microstructural Evolution in Aluminide Coatings during Manufacturing and Degradation in Service

Engineered Architectures of Gadolinium Zirconate/YSZ based TBCs Subjected to Hot Corrosion Test

Thermal Barrier Coatings: The Next Generation

Microstructure of Gas Flow Sputtered Thermal Barrier Coatings

Current Environmental Barrier Coatings Research at NASA

CMAS Infiltration Prediction for 7YSZ TBCs Deposited by EB-PVD

Oxidation Behavior of CrN, AlCrN, and AlTiN Cathodic Arc PVD Coatings

Combinatorial Exploration of the High Entropy Alloy System Fe-Mn-Ni-Co-Cr

The Effect of Mo-Cu Cathode Composition on Thin Film Synthesis and DC Vacuum Arc Characteristics

Towards High-Rate Magnetron Sputter Deposition: Influence of Discharge Power on Deposition Process and Coating Properties

High Temperature Solid PVD Lubricants Based on Vanadium

Grain Size-Dependent Metastable Phase Formation

Nanoengineering Periodically Structured SiCu Thin Film Anodes for Rechargeable LIBs

Thin Film Metallic Glass: Novel Coating Providing High Toughness and Low Friction

Combined Effects of Supersaturation and Stress for the Control of AlN Film Quality

Fabrication of Boron-doped Diamond Films on Cemented Tungsten Carbide

Measurement of Residual Stress on Transition Metal Nitride Hard Coatings by Combining Average X-ray Strain Method and Nanoindentation

Investigation of the Tribocatalysis Mechanisms involved in the Extraction of Amorphous Carbon Boundary Films from Base Oils

Phase Stability and Strain Evolution in TiZrAlN Coatings During Annealing

Gas Inlet and Input Power Modulated Sputtering Molybdenum Nitride Thin Films

Transition Metal Nitrides Deposition by HiPIMS in DOMS Mode

Advanced HIPIMS Solution for R&D and Process Development

Determining of the Critical Loads of Transition Metal Nitrides on Steels

Tribocorrosion Behaviour of Nanocomposite TiSiCN Coatings Tested in PBS Solution

High Dielectric Constant of Polymer-inorganic Nanocomposites as Gate Dielectrics for Organic Thin Film Transistor Applications

Different Nitridation Condition Influence NBTI in FinFETs

Analysis of Abnormal Transconductance in Body-tied PD SOI n-MOSFETs

Influence of the Ammonia Hardening on the Properties of Sol-Gel Thin Film Coatings

Miniaturized Shape Memory (SMA) Bimorph Actuators with Polymer Layers

Investigating Degradation Behaviors Induced by Hot Carriers in the ESL in Amorphous InGaZnO TFTs with Different Electrode Materials and Structure

Cross-sectional Investigation of Microstructure and Mechanical Properties of Graded Ti(N,B) Coatings

Nanocrystalline Pt-Au MEMS Electrical Switches

Thin Film Metallic Glass: Novel Coating Providing High Toughness and Low Friction

Driving Force for the Texture Transformation of Thin Metal Films

Strength and Strain Hardening Behavior of Particle Strengthened Coherent Cu/Ni Multilayer Films

Indentation Induced Deformation and Damage in Metal-Ceramic Multilayer Coatings

Influence of Various Interlayers on Mechanical Properties of CrAlN Coatings on Tungsten Carbide Substrate

HPPMS Deposition from Composite Targets: Effect of Two Order of Magnitude Target Power Density Changes on the Composition of Sputtered Cr-Al-C Thin Films

Adherent and Hard DLC Coatings Deposited by HiPIMS in Deep Oscillations Magnetron Sputtering (DOMS) Mode

Variation of Local Chemical Compositions of (Ti, Al)N Films on Inner Wall of Small Hole deposited by High Power Impulse Magnetron Sputtering

A Feasibility Study on the Large-area Graphene Growth by using High Power Impulse Magnetron Sputtering (HIPIMS)

3D-Painted Metals and Alloys: A New Approach to Metal and Alloy Advanced Manufacturing

3D Printing of 2D Materials

Direct Laser Deposition of High Entropy Alloy Coatings on High Temperature Alloys

In-situ Impedance Spectroscopy Evaluation of Electrolytic Plasma Polishing Process for Stainless Steels