ICMCTF2017 Thursday Morning

Tribological Behavior of Unlubricated Sliding between Steel Ball and Si-DLC Deposited by Ultra-high-speed Coating Employing MVP Method

Tribological Behavior of DLC Coatings on AISI 4340 Steel Deposited in PECVD DC-Pulsed Technique with Additional Cathode for Automotive Applications

Structural Evolution and Temperature-sensitivity of W-containing Diamond-like Carbon Films Deposited by a Hybrid Linear Ion Beam Systems

Effects of Carbon Content and Argon Flow Rate on the Triboperformance of Self-lubricating WS₂/a-C Sputtered Coating

Industrial Development of Carbon-based Coatings

Glow Discharge and Deposition of Thick DLC Film in Cage-shaped Hollow Cathode System with Adjustable Bias

Enhanced Adhesion Of Hard Dlc Coatings On Metallic And Insulating Substrates

Low Friction of Graphene Nanocrystalline Embedded Carbon Nitride Coatings Prepared with MCECR Plasma Sputtering

Solar Photovoltaic Energy Generation in Thermal Insulation Glazing

Effects of Annealing on Thermochromic Properties of W-doped Vanadium Dioxide Thin Films Deposited by Electron Beam Evaporation

Fabrication and Characterization of Titanium Doped β-Ga₂O₃ Thin Films for Application in Oxygen Sensors

Bombardment of Tungsten Oxide Thin Layers by Low Energy of He and D Ions

Stress and Friction Modelling for Improved Nano-scratch Testing of Hard Coatings

Wear Resistance and Solid Lubricity of Nanolayered Molybdenum Containing Nitride Coatings Deposited using Cathodic Arc Technique

Exploring Tribological Interactions – from Molecules to Engineering Applications

Mechanical Stability under Sliding Contact of Thin Multilayer with Weak Adhesion

Tribochemical Investigation of Hydrogenated DLC Films of Different Roughness by Means of Vacuumtribology Accompanied by Mass Spectrometry

Plasma-Assisted Lubrication for the Sliding between Polymer and Diamond-Like Carbon

Integrated Multiscale Material Modelling of Topographical Effects on Wear and Friction in Sliding DLC Contacts

A Comparative Study of Fatigue Properties of TiVN and TiNbN Thin Films Deposited On Different Substrates

The Mechanical and Tribological Properties of Nanocomposite CrMoSixN Coatings

Comparative Studies on Tribological Behaviors of a Magnetron Sputtered CrSiN Coating Under the Environments of Air and Water

The Mechanical and Tribological Properties of Ti [Nb, V] N Films on the 2024 Al-alloy

Nitriding and DLC Coating of Aluminum Alloy Using High Current Pressure-Gradient-Type Plasma Source

Towards Hard yet Tough Ceramic Coatings

Flash Lamp Annealing (FLA) for Post-deposition Treatment at High Throughput

Evaluating the Effect of Titanium-Based PVD Metallic Thin Films on Nitrogen Diffusion Efficiency in Duplex Plasma Diffusion/Coating Systems

Properties of Surface Passivation at Si/Al₂O₃ Interface Annealed in Different Gas Ambient

High Performance Solar Selective Coatings based on TiNxOy

Diagnostics of Surface Roughness during Electrolytic Plasma Polishing Pre-treatment for Stainless Steels

Radiofrequency Cold Plasma Jets Generated at Atmospheric Pressure: from Principles to Applications

Controlling Disorder in Vapor-deposited Metallic Thin Films and its Influence on Mechanical Behavior

Influence of Microstructure on the Cyclic Electro-mechanical Behavior of Ductile Films on Polymer Substrates

Crystalline/Amorphous Metallic Multilayers – from Dislocations to Shear Bands

A Novel Method for the Preparation of Tensile Thin Film Specimens for In-situ Mechanical Testing in the TEM

Liquid Metal Embrittlement at the Micro-scale: Gallium FIB vs. Xenon FIB

Quantum Contact Mechanics for Tribology, Wear and Erosion

Textile Nanocharacterization: Topography, Phase Imaging, and Nanomechanical Property Investigation of Polyester Yarn Interaction with Silicon Matrix

A Nanoindentation System with Equivalent Capabilities in Both Normal to and Parallel to the Sample Surface

The Effects of TIP Sharpness and Substrate Properties on Nanohardness Measurement in Thin Hard Coatings by FEM

Small Punch Testing for Mechanical Characterisation of a Free-standing CoNiCrAlY Coating

Thermally Sprayed Alumina and Ceria-doped-Alumina Coatings on AZ91 Mg Alloy

Langmuir−Blodgett Colloidal Assembly: Challenges and Solutions

Mechanical Properties of Thermal Spray Coatings on Carbon-fiber-reinforced Plastic

Developments in the Understanding of the Fundamental Growth Mechanisms of Aerosol Deposition

Aerosol Deposition as a Method of Room Temperature Thick-Film Deposition

Residual Stress Measurement of Aerosol Deposited Films

Microstructure and Properties of Room Temperature, Aerosol Deposited, Thick BaTiO₃ Dielectric Films

Dielectrics Produced via Aerosol Deposition