ICMCTF2015 Wednesday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Wednesday, April 22, 2015 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | |||||||||
| A1-3 |
New Interpretation of the Type II Hot Corrosion of Co- and Ni-base Alloys
|
Oxidation-Induced Microstructural Changes in NI- and CO-based Alloys and Ferritic Steels at High Temperature
|
Design, Properties and Degradation Mechanisms of Pt-AL2O3 Multilayer Coating for High Temperature Solar Thermal Applications
|
Behavior of La-Sr-Mn Coatings for SOEC Interconnector Materials in Water Vapor and Pure Oxygen under High Pressure
|
Laser Deposition of NiCrAlY/ZrO2–8wt%Y2O3 for TBC Applications
|
Corrosion Resistance of BIXTIYOZ Coatings Deposited on TI6AL4V Alloys and its Dependence on the Sputtering Parameters Magnitude
|
Thermal Properties Of Europium Zirconate, Cerate And Hafnate
|
Synthesis of Hydroxide Thin Film on the Magnesium Alloys using Hydrothermal Method
|
Mechanical Property and Oxidation Behavior of an a-CNx Deposited Tungsten Carbide with Various Silica-Alumina Hybrid Composite Interlayers Prepared by Sol-Gel Technique
|
The Creation of Thermal Stable Hydrogen-impermeable TiN-based Coatings on Zirconium Alloys
|
||
| B4-4 |
Compositional Driven Phase Evolution and Mechanical Properties of Mo-Cr-N Hard Coatings
|
Erosion Behavior of AIP Deposited Thick (Ti1-xAlx)N Coatings by High-velocity Particle Impact
|
New Tantalum Nitride Interlayer for Diamond Deposition on Cutting Tools
|
Effect of Composition on the Fracture Toughness of Ti1-xZrxN Hard Coatings
|
Stress Distribution by Residual Stress Depth Profiling in Wear Resistant Oxide and Nitride Coatings; the Effect on Process Conditions, Microstructure and Mechanical Properties
|
Effective Method to Control Elemental Composition in Ternary and Quaternary Hard Coatings by Mosaic Steered Cathodic Arc deposition
|
Applying Reflectance Spectroscopy for the Characterization of the Surfaces of Gray Iron Cast
|
The Effect of Humidity on the Friction and Wear Behaviour of Hydrogenated DLC, Non-hydrogenated DLC and Modified a-C:H:Si Coatings
|
||||
| B7 |
Surface Adsorption Phenomena From First Principles: an Application to Protective Coatings
|
Surface Softening in Metal - Ceramic Sliding Contacts: An Experimental and Numerical Investigation
|
Impact of Al on Structure and Mechanical Properties of NbN and TaN
|
Influence of Passivation Layer on the Performance of Gold Films under Thermal Treatment
|
Overcoming Growth Limitations by ab initio Guided Surface Engineering
|
A 3D Kinetic Monte Carlo Model of TiN Growth Morphology
|
Molecular Dynamics Simulations of TiN/TiN(001) Growth
|
Computational Fluid Dynamics (CFD) Simulation of CVD Process for MT-Ti(C,N) Coating
|
Electronic and Bonding Analysis of Hardness in Pyrite-type Transition-metal Pernitrides
|
|||
| C1 |
Friction and Wear Properties of Ti:Ta-doped DLC Coatings
|
Thin Films Composed of Gold Nanoclusters Dispersed in a Dielectric Matrix
|
Optical Filters and Coatings for Earth Observation from Space
|
Energetic Deposition of Hafnium-based Oxides and Oxynitrides: Comparison of Cathodic Arc and HiPIMS
|
Smart Hybrid of Two Different Magnetron Sputtering Technologies to Enhance Electrical Properties of Highly Transparent Conductive Al-Doped ZnO Films with Well-Defined Single (0001) Orientation
|
Glass Ceramic Phosphor Thin Layer for LED Lighting Package
|
Functionalization of SiC Substrates by a SOL-GEL Route in order to Optimize their Spectral Selectivity
|
Adhesion and Failure Pattern of Optical Coatings on Polymers and Glass
|
Atomistic Driven Performance of TCO Films
|
Optical and Antibacterial Properties of Silver Nanoparticles Embedded on Transparent-dielectric Films
|
||
| D1 |
Mechanical Properties, Biocompatibility and Antibacterial Behaviors of Tunable TaOxNy and TaOxNy-Ag Thin Films
|
PVD-grown Antimicrobial Thin Films on PVDF Substrates for Sensors Applications
|
Anti-biofilm Strategies for Implanted Biomaterials
|
Silver Activation as a Trigger Element of the Silver Ionization for Antibacterial Activity in Multifunctional Coatings
|
Influence of Hybrid Current Modes During Plasma Electrolytic Oxidation of Magnesium: Possible Implications on Biodegradable Implant Applications
|
Attachment and Proliferation of Neurons on Ultrananocrystalline Diamond Films with Different Surface Terminations
|
Super-hydrophobic AISI 304 Stainless Steel Surface Prepared by Electrochemical Treatment and Fluorocarbon Coating for Orthodontic Application
|
Triode Plasma Nitriding of Austenitic Manganese Steels
|
Functional Nanomaterials for Healthcare Applications
|
|||
| E3-2 |
Influence of the Physicochemical Structure of a SiCx:H Interlayer on the Tribological Behavior of a-C:H Thin Films Grown on Steel by EC-PECVD
|
Development and Tribological Characterization of Ni-doped Vanadium Nitride Coatings
|
Wear Resistant Zirconium Based Coatings
|
Diamond-like Carbon for Sliding Components in Heavy Machinery Drive Train
|
Development of Low Friction and Wear Resistant Nanocomposite Coatings for Piston Rings
|
Wear Mechanism of HIPIMS Mo-W Doped Carbon Coatings in Dry and Boundary Lubrication Conditions
|
Lubrication of Steel and DLC Contacts by MoDTC-Containing Lubricant. Effect of Lubricant Degradation
|
Atomistic Simulations of Tribo-induced Phase Transitions in Coatings
|
||||
| F2-2 |
Laser Diagnostics of Particle Dynamics in HiPIMS Plasmas
|
Correlation Between Ion Transport and Plasma Oscillations in DC and HiPIMS Discharges
|
Dynamics and Potential Structure of Ionization Zones in Magnetron Discharges
|
Plasma Characterization of Sputtered Aluminum with a MF Superimposed HIPIMS Process from Industrial Sized Rotatables
|
Controlled Reactive High-power Impulse Magnetron Sputtering - Experiments and Modelling
|
Analysis of Ion Energy Distribution at the Substrate during a HPPMS (Cr, Al)N Process using Energy Resolved Mass Spectrometer and Retarding Field Analyser
|
Electronic Properties Correlated to Vacancy Model in Nickel Oxide Thin Films Deposited by Reactive HiPIMS Discharge
|
Investigation of Plasma Conditions and Film Growth during Reactive HiPIMS of HfO2 Films
|
Magnetically Enhanced Hipims
|
Plasma Pretreatment of Tungsten Carbide and Steels by High Power Impulse Magnetron Sputtering
|
||