Chemical Vapor Deposition of Diamond Coatings on Cu-W Alloys

Advanced CVD-Diamond Coatings on Cutting Tools for Machining of CFRP

Surface Reactions during Ammonia-Plasma-Assisted Atomic LayerDeposition of Silicon Nitride

Microstructural Investigation of CVD Titanium Aluminium Nitride Multilayer Coatings

Amorphous Phase Mixed α-Al₂O₃ Hard Coatings by Plasma-Enhanced Chemical Vapor Deposition

Novel Transparent Silicon Nitride Film Synthesis at Room Temperature by Radical and Plasma Control with RF/UHF Hybrid Plasma Processes

Synthesis of Porous Crystalline TiO2 Thin Films by Glancing Angle Reactive Magnetron Sputtering

Titanium Oxynitride as a High Capacity and High-Rate Anode Material for Lithium Ion Batteries

Observation of a Reversible Phase Transition in the Dielectric Function Response of Si Nanostructures upon Li Intercalation using Generalized Ellipsometry

Novel Concept Towards Highly Efficient Photoelectrochemical (PEC) Water Splitting

Stacking Faults in Mg-doped InN

Effects of Polishing Treatment and Chemical Bath Deposited Zinc Sulphide (ZnS) Thin films on Ferritic Stainless Steel 430

Modification of the Surface Properties of Metallic Alloys by Nanopulsed Laser Surface Melting Applications and Comprehension of Laser-Matter Interaction

Mechanical Properties of Ni Based Coatings Deposited by Flame Spray Technique Varying Oxygen Flow

Study of the Hardness and Thermal Stability of the TiAlN Coatings with High and Low Aluminum Content

Structural, Tribological, and Electrochemical Properties of Plasma Nitrided Pure Titanium

Effect of Processing Parameters on Wear Resistance and Mechanical Properties of Thick ZrN Coatings on D2 Steel Deposited by Unbalanced Magnetron Sputtering

Measurement and Control Of Interfacial Adhesion

Failure Behaviour of AZO/Ag/AZO Multilayers on Pen Substrates for Flexible Electronic Devices

Electro-mechanical Characterization of Directly Written Ag Patterns on Compliant Substrates for Optoelectronic Devices

Conformal Coating of Fibrous and Porous Substrates by ALD

Effects of Electrolyte Composition on the Process of Conversion of Aluminium Foil into Alumina Ceramics by Plasma Electrolytic Oxidation

Influence of Surface Topography and Roughness on Initial Formation of Biofilm

Phase Field Model of Biofilm-Flow Interaction

Nanomechanical and Microstructure Analysis of Extracellular Matrix of Immortalized Cell Line Y201 from Human Mesenchymal Stem Cells

3D Monolayer Stress Cytometry

Incorporation of Amine Moieties onto Ultra-high Molecular Weight Polyethylene (UHMWPE) Surface via Plasma Polymerization and Grafting of Allylamine

Modification of TiO₂ Powder via Atmospheric Dielectric Barrier Discharge Treatment for High Performance Lithium-ion Battery Anodes

Development of Cold Atmospheric Pressure Plasma Jets for Material Processing and Surface Decontamination

Application of Atmospheric Pressure Plasma on PE for Increased Prosthesis Adhesion

Plasma Discharge Process for the Nitrogen-functionalization of CNTs and their Electrocatalytic Activities

Atmospheric Pressure Plasma Enhanced Recycled Wastes for High Performance Si-based Lithium Ion Battery

Coating Preparation on Mg and Corrosion Protection for Magnesium/Steel Coupling