Lifetime and Interaction of New Single and Double Layer EB-PVD Thermal Barrier Coatings with Volcanic Ash

Thermo-mechanical properties of calcium–magnesium alumino-silicate (CMAS) and CMAS infiltrated Electron Beam –Physical Vapor Deposited 7 wt. YSZ Thermal Barrier Coatings

Mitigation of Deleterious Effects of Environmental Deposits on Thermal Barrier Coatings

Degradation Study of 7 YSZ TBCs on Aero-engine Combustion Chamber Parts Due to Infiltration by Different CMAS Variants

Lifetime Influence on Different TBC Systems in Laboratory and in Practise

Effect of Process Parameters on MCrAlY Bondcoat Roughness and Lifetime of APS-TBC Systems

Protective Coatings for Gas Turbines

Nanostructural Analysis of Magnetron Sputtered HfAlN Thin Films Grown on MgO(001) by Atom Probe Tomography

Investigations on the Diffusion Behaviour of Fe, Cr, and C in Arc Evaporated TiN- and CrN-based Coatings and Their Influence on the Thermal and Mechanical Properties

Mechanical and Tribological Behavior of Nanocrystalline Ni-W Coatings: Importance of Grain Size and Grain Boundary State

Microstructure-Related Depth-Gradients of Mechanical Properties in Thin Nanocrystalline Films

Corrosion Resistance of Zirconium Oxynitride/Zirconia Thin Film Growth by Spray Pyrolysis-nitruration and DC Sputtering Magnetron Unbalance

Structural Characterization of NbAlN Coating Deposited on AISI D2 Steel by TRD Method

Surface Hardening of IF Steel by Plasma Nitriding and Pre-shot Peening

Influence of Cu Additions on the Mechanical and Wear Properties of NbN Coatings

A Novel Hierarchical Aluminum-doped Zinc Oxide Thin Film for Flexible Thin-film Solar Cells

Evaluation of TiN-Coated Aluminum Electrodes for DC High Voltage Electron Guns

Effects of N₂O Addition During the Growth of ZnO Films using High-temperature H₂O Generated by a Catalytic Reaction

Enhancement of Open-circuit Voltage on Organic Photovoltaic Devices by Al-doped TiO₂ Modifying Layer Produced by Sol-gel Method

Thermochromics and Electrochromics for Energy Efficient Fenestration

Degradation Mechanism of ZnO thin Film for TCO of Flexible a-Si:H PV Module due to Moisture

Growth Mechanism of Silver Chloride Nano Wires by Electrodeposition Route

Solid Particle Erosion Resistant Nanolayered CrAlTiN and Multilayered CrAlTiN-AlTiN Coatings

Microstructure and Properties of WC-Co(-Cr) HVOF Coatings Obtained from Standard, Superfine and Modified by Sub-microcrystalline Carbide Powders

Corrosion and Tribological Properties of Thick Diamond-like Carbon (DLC) Coatings Deposited using a Meshed-PIID Process

MoSx/WC PVD Coatings for Harmonic Drive Gears in Space Applications Characterized by Vacuum Pin on Disc Tests and XPS

Tribological Behaviour of the Non-Hydrogenated Diamond-like Carbon (DLC) Coatings Against Ti-6Al-4V: Effect of Surface Passivation by Alcohol

Diamond-like Carbon Nanocomposite Coatings to Mitigate Friction and Wear in Harsh Environments

Surface Modification of Electrode Materials for Lithium-ion Batteries

Experimental and Ab Initio Investigations on Textured Li-Mn-O Spinel Thin Film Cathodes

Production of Core–shell Copper/Tin/MWCNT Composite Electrodes for Li-ion Batteries

Influences of Feedstocks on the Processes and Microstructures of the Flame-sprayed SOFC Anode

Li Ion Technology for Vehicle Electrification

Improvement on the Corrosion Behaviour and Surface Conductivity of Coblast Coatings by Pack Cementation

Selective Wear Protection of Forging Dies through Localized Plasma Duplex Treatments

The Boriding Process in CoCrMo Alloy: the Presence of Indentation Size Effect and Fracture Toughness on Cobalt Boride Coatings

Pre-treatment of Polymer Based Substrates and High Rate Deposition of Silicon Dioxide Films Using a New Dual Magnetron Plasma Source

Influence of Nitriding Parameters on the Tribological Properties and the Adhesion of Ti- and Cr-based Multilayer Designs

The Powder-Pack Nitriding Process: Growth Kinetics of Nitride layers on pure iron

Influence of Substrate Pre-treatments on Residual Stresses and Tribomechanical Properties of PVD Coatings

Improvement of Coating Performance by Combining Different PVD/PACVD Technologies and Surface Treatments

Erosion Characteristics of AlCr Composite Cathodes in Cathodic Arc Plasma with Inert and Reactive Gas Atmospheres

Plasma Characteristics of High Power Impulse Plasma Source (HiPIPS) For Low Temperature Diamond Growth

Characterization of Transport of Sputtered Particles from Target to Substrate in Multiple Frequency Driven Discharges

Status and Challenges in Electrical Diagnostics of Processing Plasmas

Study of Substrate Heating during Reactive Magnetron Sputtering

Simulation of Magnetron Discharges and Modeling Approaches Towards HiPIMS

Time-resolved Plasma Diagnostics in Reactive High-power Impulse Magnetron Sputtering Discharges

Measuring and Controlling the Plasma in Pulsed Laser Deposition of Thin Films