ICMCTF2014 Monday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Monday, April 28, 2014 | |||||||
|---|---|---|---|---|---|---|---|---|
| 10:00 AM | 11:00 AM | 12:00 PM | ||||||
| B1-1 |
Composition Control in Zr-Cu-Ni-Al Thin Film Metallic Glass for Improvement of Mechanical and Anti-microbial Properties
|
Low-Temperature, High-Rate Growth of Dense, Hard and Stress-free Refractory Ceramic Alloy Coatings
|
Estimating Metastable Phase Formation During Magnetron Sputtering
|
Microstructure and Superhardness Effects of VC/TiC Nanoscale Multilayer Films
|
Recent Developments in Industrial Scale Pulsed Laser Deposition Technology for Thin Films
|
|||
| B5-1 |
Hard Multifunctional Hf-B-Si-C Films Prepared by Pulsed Magnetron Sputtering
|
Influence of Hf on the Structure, Thermal Stability and Oxidation Resistance of Ti-Al-N Coatings
|
Growth of Hard Amorphous Ti-B-Si-N Coatings by Cathodic Arc Evaporation
|
Structure, Oxidation Resistance and High Temperature Tribological Properties of CrTiAlN Coatings
|
Growth of AlYB14 Thin Films by HPPMS
|
|||
| C1 |
Challenges and Perspectives of Optical Interference Coatings: FromTelecom and Space to Security and Consumer Electronics Applications
|
Assessment of the Mechanical Properties of Optical Coatings by in situ Real-time Approaches
|
Low Temperature Deposition of Thermochromic VO2 Optical Coatings Using HiPIMS
|
The Characteristics of Heavily Ga-doped ZnO Films with High Carrier Concentration for use in Plasmonics
|
Smart Optical Coating Systems for Energy Efficient Building Envelopes
|
Potential Impact of Ambient Gases and Oxygen Partial Pressure on Structural, Hydrophobic, Optical and Electrical Property of Nanostructured HfOxNy Film
|
||
| E1-1 |
Contact and Friction of Rough Adhesive Surfaces
|
Wear Phenomena of ta-C Under Ultra-low Friction Conditions
|
Temperature-induced Low Friction of Sputtered Si-containing Amorphous Carbon Coatings
|
The Aging and Temperature effects of DLC Coatings
|
Nanoscale Sliding Friction Phenomena at the Interface of Diamond-like Carbon and Tungsten
|
Scratch Testing for Diamond-like Coatings Evaluation at Micro and Nano-scale
|
Failure Mechanisms of DLC Coated Ti-6Al-4V and CoCr Biomedical Materials under Cyclic High Combined Contact Stresses
|
|
| F5 |
Electromechanical Properties of ZNO:Al Thin Films on Polymer Substrates for Optoelectronics Applications
|
Low Temperature Titanium Dioxide Diffusion Barrier Layers on PEN Using Spatial Atomic Layer Deposition
|
Stretch to the Limit: Ductility of Thin Metal Films on Polymer and Elastomer Substrates
|
Small Diameter Circular Ion Sources for Surface Engineering of Polymers
|
Mechanical Design of Organic Light Emitting Diodes on Polymer Substrates
|
On the Response of Ti-6Al-4V and Ti-6Al-7Nb Alloys to a Nitron-100 Treatment
|
A Comparison of Nanoindentation Pile-up in Bulk Materials and Thin Films
|
|
| G4 |
Nobel Wear Resistant Coating System for AHSS Stamping Die
|
Development of (Cr,Al)ON Coatings using Middle Frequency Magnetron Sputtering and Investigations on Tribological Behavior against Polymers
|
Tailoring Wear Resistant PVD Coatings for Metal Cutting Applications
|
Investigation of Suitability of CVD Diamond Thick Film Tool Coatings for High Performance Cutting of Ti6Al4V Super Alloys
|
Technology Trends in Coated Cemented Carbides for High Demanding Applications CVD, PVD, Cutting Tool
|
|||