Formation and Characterization of Reconstructive Coatings

Plasma Electrolytic Oxidation for Surface Treatment of Engine Cylinder Bores

Understanding Wear of Diamond-like Carbon Coatings for use in High-pressure Diesel Injection Engines

Characterization and Tribological Investigations of Arc Evaporated Mo-based Coatings

Development of New Oxidation Resistant Coating for Dry Hobbing

Third Body Behavior During Dry Sliding of Al-Al₂O₃ Composite Coatings: in situ Tribometry and Microanalysis

Prototyping Solid-Oxide Fuel Cells with Pulsed Laser Deposition

High Performance Nano-Coatings for Ferritic Stainless Steel Strips used as Solid Oxide Fuel Cell Interconnects

Strontium Diffusion in Magnetron Sputtered Gadolinia-doped Ceria Thin Film Barrier Coatings for Solid Oxide Fuel Cells

High Performance Duplex Coatings for PEMFC Metallic Bipolar Plates by CFUBMSIP and HIPIMS Technology

Industrial, Low Cost Ceramic MaxPhase™ Protective Coatings for Stainless Steel Bipolar Plates

Pre-coated Steel Stripes for PEMFC and SOFC Interconnects

R.F. Magnetron Sputtered Li-Mn-O Thin Films

The Effect of Reactive Element Coatings on the Oxidation Properties of Ferritic Steels for Solid Oxide Fuel Cell Interconnect Applications

Surface Modification for Metal using a Newly Developed Atmospheric Controlled Induction-heating Fine Particle Peening (AIH-FPP) System

Number of Passes and Thickness Effect on Mechanical Characteristics of Cold Spray Coating

Effects of Intermediate Surface Treatments on Corrosion Resistance of Cathodic Arc PVD Hard Coatings

Microstructure and Dielectric Nature of Plasma Sprayed Ultra Purity Aluminum Oxide Coatings

The Fracture Toughness of Boride Coating Improved by a Diffusion Annealing Process

Direct Thermal Conductivity Measurement of Nanostructured Coatings Using a Modified Photoacoustic Technique

Thermo-Mechanical Modeling of Carbon Nanotube Arrays for Thermal Interface Applications

Heat Transfer in Encased Graphene

Limited Thermal Conductance of Metal-carbon Interfaces

Thermoreflectance Microscopy of Thin Films

Hydrogen Absorption and Desorption Properties of Pd/Mg/Pd Tri-layers Prepared by Magnetron Sputtering

Interface Engineering for Optimized Thermal Transport in Copper/Diamond System

Synthesizing MnO2/Graphene Composites by a Hydrothermal Method for use to Enhance the Performance of Supercapacitor

Correlation Between the Rockwell Indentation Test and the Progressive Load Scratch Test for Assessment of Coating Adhesion

How to Make Tribological Tests Physical

Depth Profiling >40-µm Anodized Coatings Using Glow Discharge Optical Emission Spectroscopy

Mechanical Properties of Nanocrystalline Coatings Revealed by Bending Tests on Fabrication-Unaffected Micro-Cantilevers

Cyclic and Monotonic Mechanical Properties of Micro Samples Acquired with Custom Built Setups Working up to 1000 Hz – CuAl10Ni5Fe4, 3Y-PZT

High Cycle Fatigue of Al and Cu Thin Films by a Novel High-Throughput Method

Structural, Morphological and Mechanical Characterization of Mo Sputtered Coatings

Effect of AlN Layer on the Growth and on the Structure of Reactive Sputtered TiAlN Thin Films and Multilayers

Structural Characterization of Amorphous GdTM2 (TM=Fe, Ni and Co) from First-principles

Influence of Stoichiometry and Architecture on Mechanical Properties of Cathodic Arc Deposited Ti-Al-Cr-N Coatings

Fabrication and Characterization of Polymethylmethacrylate (PMMA) Thin Film by Plasma Polymerization