Oxidation Behavior of Co-Doped NiCrAl Alloys in Dry and Wet Air

Platinium Diffusion in Pure Nickel

Microstructure Degradation of EB-PVD TBCs on Pt and Pd/Pt-modified Aluminide Coatings under Cyclic Oxidation Conditions

Ferritic-Martensitic Steels: Improvement of the Oxidation Behavior in Steam Environments via Diffusion Coatings

Oxidation under Pure Steam: Protective Oxides and Coatings

Investigation of the Anti-adhesion Effect of Nano- and Micro-structured Surfaces

Chloride Induced High Temperature Corrosion in Waste and Biomass Fired Boilers – Degradation Mechanisms and Mitigation Measures

Properties and Performance of Al/Al₂O₃ Coatings on 304 Steel in Metal Dusting Environments

Microstructural Evolution of Cr/Cr₂O₃ coatings during exposure to Metal Dusting conditions

High-temperature Oxidation Corrosion of Boiler Steel with Al Coating under Co-firing of Biomass Charcoal / Coal Deposits

Design and Metallurgy of High-performance Sputtering Target Materials

Synthesis of Very Thick, Sputter-Deposited, Iron and Tantalum Film-Based Targets for Laser Experiments to Understand High Pressure Behavior in Materials

Characterization of Al Sputter Process in Multiple Frequency Capacitively Coupled Plasmas (MFCCP)

Influence of Magnetron Sputtering Conditions on WTi Thin Films

Architectural Design of Al-rich Cubic Coating Materials within the AlN-CrN System

Influence of Argon Flow on Growth Rates in Reactive Magnetron Sputtering of Oxides and Production of an Esthetic Coating for Dental Implants

Investigations of Arc-evaporated (Al_0.7Cr_0.3)₂O₃ Coatings from Al-Cr-Si and Al-Cr-Fe Targets

Synthesis of Al-Ti-O-N Thin Flms by Reactive Magnetron Sputtering

The Optimization of the Deposition Parameters to Prepare the ZnSnO₃ and Cd₂SnO₄ by RF Magnetron Sputtering from Powder Targets

Structural and Mechanical Properties of Cr-Al-O-N Thin Films Grown by Cathodic Arc Deposition

Texture Dependent Elastic Constants of Polycrystalline Zr—Al—N Predicted by Ab Initio Calculations

Influence of Zr on Structure and Properties of Ti-Al-N Coatings

Understanding Stress Development in Nanoscale Sputtered Thin Films from Real-Time Diagnostics

Hard Zr-Al-O Films with Enhanced Resistance to Cracking in Bending

AlN-based Optically Transparent Hard Nanocomposite Coatings: Going from Si to Sn

Nanostructure of Plasma CVD Films Containing Nanoparticles

Structure and Properties of TiAlSiN Nanocomposite Coatings Deposited by Deep Oscillation Magnetron Sputtering

Multifunctional Amorphous and Nanocomposite Nb-Si-C Coatings Deposited by dc-magnetron Sputtering

Nanocomposite Coatings as Protection Layer for PcBN Tools in Hard Machining

Evaluation of the Bio-tribocorrosion Processes of Colonized Ti6Al4V Implants in Presence of Organic and Cellular Material

Tribocorrosion Evaluation of nc-TiN/a-Si₃N₄ Deposited on Ti6Al4V in Sliding Contact in Physiological Saline Solution

Nanotube Surface Modifications For Biomedical Applications

Predicting Thickness of Passive Films in Order to Prevent Degradations of Implants

Electrochemical Behavior of Esthetic Dental Coatings Tested in Sodium Chloride Solution and Artificial Saliva

Submicroporous Ta₂O₅ Coating Enhanced the Initial Biological Responses to Ti Surface

Scanning Electrochemical Microscopy (SECM) Investigation of Tribolayer Formation on a MoM Hip Implant

Enhancements in Corrosion Resistance and Biocompatibility of Biomedical Ti-25Nb-25Zr Alloy Using Electrochemical Anodization Treatment

Anti-fish Bacterial Pathogen Effect of Immobilized TiO₂/Fe₃O₄ Powder on Glass

Novel Functionalization of Anodized Ti6Al4V Nanotubes through Thermal Oxidation Approach

Tribological Comparison Between a Commercial DLC and an Experimental TaSiN Thin Films

In-situ Synthesis of DLC Boundary Films From Base Lubricating Oils at Sliding Tribological Interfaces

Critical Role of Tribofilm in the Performance of Electrical Contacts Involving Cu-DLC Nanocomposite Coating

Influence of the Coating Structure of a-C:H-W Coatings on their Wear-performance: a Theoretical Approach and its Practical Confirmation

From Predictive Modelling via Optimized Testing to Applied Coating Development: DLC Coatings Durability under Nano-fretting Conditions

Microwear Investigations of DLC Coatings with Nanometer Resolution in Normal and Lateral Direction

Failure Mechanisms of DLC and TiN Biomedical Coatings on SS316L and M2 Substrates under Cyclic Impact-sliding Loads

Tribological Behavior of the Superhard Coatings of Ta-N-Si and Nb-N-Si

Friction Reduction by Thermal Post-deposition Treatment of Arc Evaporated TiAlTaN Coatings in Methane

Dangling Bonds Induced Cross-linking Model in Nanoscratched Graphene Layers

Facing Challenge of Stamping Advanced High Strength Steels

Substrate Effects on Failure Behavior of Hard Coatings Under Inclined Cyclical Loading Conditions

Manufacturing of Metal-based Microparts: Fabrication Strategies and Application of Coatings to Engineering of Tool Surfaces

Effects of Thin Film Metallic Glass Coating on Sharpness Improvements of Cutting Tools

Decomposition of Ti-Cr-Al-N/Ti-Cr-N Multilayer Coatings

The Characteristics of Titanium Nitride Thin Films deposited by Reactive Plasma Deposition System and their Dependence on the Output Power of Plasma Gun

Influence of PVD (Cr,Al)N Coatings and Surface Topography on Adhesion Behaviour towards PMMA

Self-Assembly of Two-Dimensional Nanosheets Induced by Interfacial Polyionic Complexation

Synthesis of Mono- to Few-layer Graphene on Cu-Ni Alloy for Transparent Conducting Electrodes

Soft Materials with Hard Skin: Synthesis, Assembly and Applications

The Effects of Electron Irradiation Conditions on the Formation of Embedded Graphene Sheets During Carbon Film Deposition in ECR Plasma

Intrinsic Wettability of Graphene

AFM Based Investigation of Organic Semiconductor Nanostructures Grown on Graphene Electrodes

Large-Scale Synthesis of Graphene Films by Pulsed Laser Deposition