ICMCTF2013 Friday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Friday, May 3, 2013
8:00 AM 9:00 AM 10:00 AM
Formation and Characterization of Reconstructive Coatings
Plasma Electrolytic Oxidation for Surface Treatment of Engine Cylinder Bores
Understanding Wear of Diamond-like Carbon Coatings for use in High-pressure Diesel Injection Engines
Characterization and Tribological Investigations of Arc Evaporated Mo-based Coatings
Development of New Oxidation Resistant Coating for Dry Hobbing
Third Body Behavior During Dry Sliding of Al-Al2O3 Composite Coatings: in situ Tribometry and Microanalysis
Prototyping Solid-Oxide Fuel Cells with Pulsed Laser Deposition
High Performance Nano-Coatings for Ferritic Stainless Steel Strips used as Solid Oxide Fuel Cell Interconnects
Strontium Diffusion in Magnetron Sputtered Gadolinia-doped Ceria Thin Film Barrier Coatings for Solid Oxide Fuel Cells
High Performance Duplex Coatings for PEMFC Metallic Bipolar Plates by CFUBMSIP and HIPIMS Technology
Industrial, Low Cost Ceramic MaxPhase™ Protective Coatings for Stainless Steel Bipolar Plates
Pre-coated Steel Stripes for PEMFC and SOFC Interconnects
R.F. Magnetron Sputtered Li-Mn-O Thin Films
The Effect of Reactive Element Coatings on the Oxidation Properties of Ferritic Steels for Solid Oxide Fuel Cell Interconnect Applications
Surface Modification for Metal using a Newly Developed Atmospheric Controlled Induction-heating Fine Particle Peening (AIH-FPP) System
Number of Passes and Thickness Effect on Mechanical Characteristics of Cold Spray Coating
Effects of Intermediate Surface Treatments on Corrosion Resistance of Cathodic Arc PVD Hard Coatings
Microstructure and Dielectric Nature of Plasma Sprayed Ultra Purity Aluminum Oxide Coatings
The Fracture Toughness of Boride Coating Improved by a Diffusion Annealing Process
Direct Thermal Conductivity Measurement of Nanostructured Coatings Using a Modified Photoacoustic Technique
Thermo-Mechanical Modeling of Carbon Nanotube Arrays for Thermal Interface Applications
Heat Transfer in Encased Graphene
Limited Thermal Conductance of Metal-carbon Interfaces
Thermoreflectance Microscopy of Thin Films
Hydrogen Absorption and Desorption Properties of Pd/Mg/Pd Tri-layers Prepared by Magnetron Sputtering
Interface Engineering for Optimized Thermal Transport in Copper/Diamond System
Synthesizing MnO2/Graphene Composites by a Hydrothermal Method for use to Enhance the Performance of Supercapacitor
Correlation Between the Rockwell Indentation Test and the Progressive Load Scratch Test for Assessment of Coating Adhesion
How to Make Tribological Tests Physical
Depth Profiling >40-µm Anodized Coatings Using Glow Discharge Optical Emission Spectroscopy
Mechanical Properties of Nanocrystalline Coatings Revealed by Bending Tests on Fabrication-Unaffected Micro-Cantilevers
Cyclic and Monotonic Mechanical Properties of Micro Samples Acquired with Custom Built Setups Working up to 1000 Hz – CuAl10Ni5Fe4, 3Y-PZT
High Cycle Fatigue of Al and Cu Thin Films by a Novel High-Throughput Method
Structural, Morphological and Mechanical Characterization of Mo Sputtered Coatings
Effect of AlN Layer on the Growth and on the Structure of Reactive Sputtered TiAlN Thin Films and Multilayers
Structural Characterization of Amorphous GdTM2 (TM=Fe, Ni and Co) from First-principles
Influence of Stoichiometry and Architecture on Mechanical Properties of Cathodic Arc Deposited Ti-Al-Cr-N Coatings
Fabrication and Characterization of Polymethylmethacrylate (PMMA) Thin Film by Plasma Polymerization
Sessions | Time Periods | Topics | Schedule Overview