ICMCTF2009 Tuesday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Tuesday, April 28, 2009
8:00 AM 9:00 AM 10:00 AM 11:00 AM
Platinum Nucleation Mechanisms and their Role in Platinum Aluminide Coatings
Oxidation and Volatilization of Coatings for Power Generation: New Super Sultra Critical Steam Turbines
High Temperature Coatings for Gas Turbine Engines
Computational Investigation into the Phase Stability and Phase Distribution in the Ni-Cr-Al Ternary System
New Generation HIPIMS Nanostructured Coatings to Perform in Severe High Temperature Environment
Investigation of an Oxidation Barrier for IN 617 at Low pO2
Stable Electrodes and Passivation Coatings for High Temperature Acoustic Wave Sensors
High Temperature Oxidation Behavior of RF Magnetron Sputtered NiCrAl Coatings on Superalloys
Contribution of an In Situ Microscopic Approach for a Better Understanding of the Oxidation Phenomena of TiSiN Nanocomposite Films Deposited on Steel
Synthesis and Oxidation Resistance of TiAlSiN and Multilayer TiAlSiN/CrAlN Coating
Non-Linear Finite Element Modeling of Ultra-Hard Nanocomposites: The Ratio of Hardness to Yield Strength, Origin of the Ultra-Hardness and the Limits of Nanoindentation to its Measurement
Secondary Ion Mass Spectrometry and Auger Electron Spectroscopy Used at nm Range Depth Resolutions and Tens of nm Range Lateral Resolution for Ultimate Characterization of Nanostructured Hard Coatings
Solid Solution Nanocomposite Cr-Si-N Thin Films
Microstructure and Erosion Resistance of Nanocomposite Ti-Si-C-N Coatings Deposited using HMDSN Precursor
Mechanical and Tribological Properties of Nano-Scale Multilayered TiN/CrN Coatings
The Effects of Interlayer Grading and Pulsed Biasing on Chromium Nitride Films
A New Approach to the Synthesis of Adherent Hard Coatings with High Toughness
Microstructural and Mechanical Properties of Sputter Deposited TiN/SiNx Multilayer Coatings on Si Substrate
Diamond Functionalizatin for Biosensing Applications and the Detection of NOx
CVD-Diamond Coating on Steel Substrates: Basics and Applications
CVD-Diamond on Titanium Substrate as Electrode for Wastewater Treatment
Manufacturing and Properties of Self-Supporting Nano-Crystalline Diamond Foil
Mechanical Properties of Ultrananocrystalline Diamond Films with Different Nucleation Densities
Recent Developments in the Application of Single-Nano Diamond Particles
Influence of Surface Roughness on the Tribological Properties of HF-CVD Diamond Coated Heat-Treatable Steel
The Thermostability of Detonation Nanodiamond
Comparative Study of Polishing Processes of Semi-Conductor Crystals and other Materials Surfaces by Detonation Nanodiamonds (DNA) and Colloidal Silica Compositions
Mechanical Properties of Metals Below 100 nm - Effects of Size, Temperature and Geometry
Hardness Mapping and Nanoindentation of Cold-Spray Coatings
Ultra Low Indentation Approach to Stress-Strain Behavior of Thin Films
Mechanical Properties of TiN/Ti Multilayer Coating Deposited by LAFAD Technology
Small-Scale Tests for Investigating Plastic Flow in Brittle Crystals
Mechanical and Electrical Behavior of Oxide-Dispersion Strengthened Au Microcontacts
Factors Affecting the Critical Indenter Penetration for the Measurement of the Hardness and Young's Modulus of Coatings
Influence of Intrinsic Stress on the Measurement of the Onset of Yielding for Thin Films Using Depth-Sensing Spherical Indentation
Influence of the Nitriding and TiAlN Coating Thickness on the Mechanical and Tribological Properties of a Duplex Coating System on H13 Die Steel
Deformation Mechanisms in TiN/NbN Multilayer Thin Films
Exploring the Potential of Triode Plasma Diffusion Treatments to Improve the Wear Behaviour of Titanium Alloys
RF-Plasma Technique for Duplex Coatings on Aluminum
Plasma Nitrocarburizing and Laser Hardening Duplex Treatment of AISI 4340 Steel
Dedicated Coatings for High Precision Cutting Tools – Coating Design and Architecture Adjusted with Most Modern Process Technology
Edge Honing for High Performance Drilling Operations
Process Temperature and Post Annealing Effects on Microstructure and Mechanical Behavior of the Sputtering Ni-P-Al Coatings
Chiral Architectures in Thin Films: Fabrication and Applications
Shape Modification of Silica Submicroparticles Assembled in Compact Monolayer by Dry Etching
Self-Organized Functional Metallic Nano-Arrays by Combined Ion Beam Sputtering and Plasma Deposition
Nano Multilayer Transparent SiOx-Based PECVD Coatings for Barrier and Protective Applications
Patterning of Semiconductor Surfaces with Ordered Metallic Nanowires and Nanoparticles via Self-Assembly
Carbon Nanotube Films as Transparent, Conductive and Flexible Electrodes
Structural Characteristics and Photocatalytic Capabilities of Visible Light Responsible Nanoporous TiO2/ITO Composite Thin Films
Surface Functionalization of High Strength Biomedical Ceramics
Osteoblast Adhesion to Metal-Oxide Incorporated Diamond-Like Carbon Films
Tribology and Corrosion Behavior of Alpha Alumina-coated Ti-6Al-4V for Surgical Implantation
Fabrication of Hierarchical Wrinkled Micro-Pillars using Diamond-Like Carbon Coating
Anti-Microbial Properties of Silver Modified Amorphous Carbon Films
Rapid Antimicrobial Susceptibility Testing of Escherichia Coli and Staphylococcus Aureus by Using the Cr-Cu-N Nanocomposite Thin films with Gradient Copper Content
Electrochemical Characterization of Biocompatible TiOx and NbOx Films
Structural Characterisation of Multifunctional Biocompatible Ti(CON) Based Boatings
Preparation of Plasma-Polymerized Para-xylene as an Alternative to Parylene Coating for Biomedical Surface Modification
Micro-arc Oxidation of β Titanium Alloy: Structural Characterization and Osteoblast Compatibility
Nanoindentation and Corrosion Studies of TiN/NiTi Thin Films for Biomedical Applications
Sessions | Time Periods | Topics | Schedule Overview