ICMCTF2008 Wednesday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Wednesday, April 30, 2008 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8:00 AM | 9:00 AM | 10:00 AM | 11:00 AM | ||||||||
| A3-1 |
Considerations in Developing a Design Strategy for Novel TBCs
|
Mechanisms of Lifetime Improvement in Thermal Barrier Coatings with Hf and/or Y Modified Superalloy Substrates
|
Thermo-Mechanical Properties and Delamination Mechanism of CMAS Penetrated Thermal Barrier Coatings
|
Oxidation Behavior of Air Plasma Sprayed NiCoCrAlY Bond Coats for Air Plasma Sprayed Thermal Barrier Coatings
|
Advanced Low Conductivity Thermal Barrier Coatings: Performance and Future Directions
|
Yttria-Stabilized Zirconia Thick Coatings Deposited from Aqueous Solution in a Low Pressure Plasma Reactor
|
Oxide and TBC Spallation in ß-NiAl Coated Systems Under Mechanical Loading
|
||||
| B5-1 |
Plasma Enhanced Magnetron Sputter Deposition of Ti-Si-C-N Based Nanocomposite Coatings
|
Stabilization of Cubic (Ti1-xAlx)1-yYyN Thin Films by Bipolar Pulsed DC Magnetron Sputtering
|
Structure, Stresses and Stress Relaxation of TiN-Me (Me=Ag, Cu) Multilayer and Nanocomposite Coatings
|
Compressive Stress Generation in Titanium Nitride Coatings
|
Influence of Rotation During Sputtering on the Stoichiometry of TiAlN/CrN Multilayer Coating
|
Nitrogen-Induced Nanostructure and Property Changes in Sputtered Ti(Al)-B Films
|
Corrosion Behavior of (Ti-Al-Cr-Si-V)xNy Coatings Derived from RF Magnetron Sputtering
|
Oxidation Behavior of Arc-Evaporated TiSiN and AlTiSiN Coatings Deposited on Steel. In situ Approach of the Phenomena by Environmental Microscopy.
|
Effect of the Oxygen Content on the Structure, Morphology, Thermal Stability and Oxidation Resistance of Cr-O-N Coatings
|
The Role of Al for the Structure and Performance of Al-Cr-N Coatings
|
|
| D2-2 |
Friction Reduction in the Valve Train With Triondur® Carbon Coating
|
Friction and Wear Behaviour of Modified ta-C Films
|
CVD-Diamond Coatings for Highly Demanding Cutting Operations
|
DLC Film Deposition on the Inner Wall of the Cylinder Using Hollow Cathode Effect Wth Low Frequency Pulse Power
|
Classification of Diamond-Like Carbon Films for Industrial Application
|
Modified DLC Coatings Prepared in a Large-Scale Reactor by Dual Microwave/Pulsed-DC Plasma-Activated Chemical Vapour Deposition
|
Mechanical Comparison of Deuterated and Hydrogenated Amorphous Diamond-Like-Carbon Coating Prepared by rf-PECVD and FCVA
|
||||
| E3-2 |
Micro-Tribological Performance of MoS2 Lubricants With Varying Au Content
|
Tribological Characteristics of MoS2 Nb Solid Lubricatn Films in Different Tribo Test Conditions
|
Friction and Wear Properties of Nanocrystalline Diamond Coatings
|
Coating Chemistry and Run-in Friction of Nanocrystalline Diamond Coatings
|
Wear Behavior in SiC-TiX Nanocomposites
|
Effect of Microstructure on the Erosion Resistance of Cr-Si-N Coatings
|
Tribological Performance of Superhard Nanocomposite Ti-Al-Si-N Coatings at Elevated Temperature
|
Mechanical and Tribological Properties of Nanocomposite and Nanomultilayered Ti-B-N Thin Films
|
Wear Evaluation of WC Inserts Coated With TiN/TiAlN Multinanolayers
|
||
| F4 |
Epitaxial TiN/VN Coatings: High-Resolution TEM and EELS Studies Compared to ab-Initio Calculations
|
Impact of Low-Temperature Carburization on the Microstructure of Structural Alloys
|
High-Resolution Electron Microscopy Characterization of Nanocrystalline Grain Boundaries in Gold-Copper Alloys
|
Transmission Electron Microscopy and Electron Energy Loss Spectroscopy Study of C/Cr Coatings
|
|||||||
| G8 |
Processing and Performance of Ceramic Protective Coatings
|
Materials Systems Approach to Meeting Turbine Airfoil Durability Goals: Role of Alloys, Coatings, and Interactions
|
Coatings for Polymer Turbine Blades
|
||||||||
| H1-1 |
Preparation and Properties of Muti-Component Nanocrystal Thin Films: Building With Artificial Atoms
|
Matrix Assisted Pulsed Laser Evaporation (MAPLE) for Deposition of Carbon Nanopearls
|
Nanostructures by Glancing Angle Deposition
|
Influence of Effective Activation Energies on CVD Growth of Carbon Nanotubes
|
Pulsed Laser Deposition of Nanostructured Double Perovskite Magnetic Thin Films and Multilayers
|
Vertically Aligned Carbon Nanotube Scaffolding for High Aspect Ratio Microelectromechanical Systems
|
Formation of SiC Nanoparticle Using Thermal Annealing of Two Layer C/Si Films on Si Substrate
|
Formation and Cathodoluminescence of Single Crystalline Al:ZnO Nanoscrews Synthesized by Thermal Evaporation
|
|||