Investigation of the Low Temperature Atmospheric Plasma System for Deposition Photocatalytic TiO₂ Thin Film

Recent Advances in CVD of α-Al₂O₃ for Tool Coatings

CVD-Al₂O₃-Coatings - Correlations Between Structure and Properties

Improvement of Coating Adhesion by WC Interfacial Layer for Coated Cemented Carbide

Novel Aluminium-Rich Ti_1-xAl_xN Coatings by LPCVD

Microstructural Investigation of MTCVD Ti(C,N) Coatings

Influence of the Deposition Temperature on Mechanical and Tribological Properties of Si-C:H Coatings on Nitrided and Postoxidized Steel Deposited by DC-PACVD

New Methodologies for Enhancing the Nucleation, Growth Rate, and Quality of Nanocrystalline Diamond Films

Realising the Potential of Thin Hard Coatings for Tribological Exploitation

Multilayered Adaptive Coatings for Friction and Wear Reduction Under High Temperature Cycling

Microstructure and Tribological Properties of CrN-Ag Nanocomposite Coatings

Mechanical and Tribological Properties of CrN/Ag and CrSiN/Ag Nano scale Multilayers Deposited by Reactive Magnetron Sputtering

Microstructural Design of Ternary nc-TiC/a-C Based Nanocomposite Coatings Through Alloying With Second Metallic Element

Structure and Properties of Nanocomposite and Multilayered TiCrBN/WSe_x Coatings Deposited by Ion Implantation Assisted Sputtering of TiCrB and WSe₂ Targets

Nanocomposite and Nanolayerd PVD Hard Coatings in Industrial Research and Application

Effect of Alloying Element (Si, Y) on Properties of Arc-Deposited (TiCrAl)N Coating

Mechanical and Tribological Properties of Duplex and Non-Duplex Cr-Al-N Coated AISI 4140 Steel

Gradient Cr(C,N) Cathodic Ac PVD Coatings

The Effect of Oxygen Content on the Temperature Dependent Tribological Behavior of Cr-O-N Coatings

Coatings for Tribological Applications in Aerospace and Application-Close Testing

TiN-Ag Nanocomposite Coatings: Deposition Process and Tribological Characterisation

Nanotribology Simulations of Self-Assembled Monolayers Using Realistic AFM Tips

Impact Stress Absorption and Load Spreading in Multi-Layered Erosion-Resistant Coatings

RF Glow Discharge Plasma Opens New Possibilities for the Characterization of Thin Films

Residual Stresses in Thin Films Characterized by High Temperature X-ray Diffraction

Advanced Characterisation of Plasma Electrolytic Oxidation Coatings on Aluminium: Effects of Direct Current Density and Electrolyte Concentration on Residual Stresses

Residual Stress Depth Profiling in Complex Hard Coating Systems by X-ray Diffraction

A New Non-Destructive Method of Determining the Modulus of Nanoscale Thin Films

Influence of Plasma Nitriding and Surface Roughness on the Wear and Corrosion Resistance of Thin Films (PVD/PECVD)

Surface Characterization and Phase Transformation Behavior of the Magnetron Sputtering Nickel-Phosphorus-Based Coatings

Fast Regime - Fluidized Bed Machining (FR-FBM) of Atmospheric Plasma Spraying (APS) TiO₂ coatings

Improving the Substrate Adhesion of PVD Coatings by Anode Layer Source Treatment

Bioactive Glass Coatings on Metallic Implants

Non-Fouling Surfaces in Marine and Biomedical Environments

Cell Growth and Proliferation on Polyethylene Plasma-Implanted With Copper and Gas Ions

Tribological Behavior of UHMWPE Sliding Against Nitrided Ti-6Al-4V Alloys by Plasma Immersion Ion Implantation

Nanocrystalline Passivation Layer On Magnetron Sputtered TiNi Shape Memory Thin Films For Biomedical Applications

Nanocrystalline Fe₃O₄ Thin Films for Biosensor