ICMCTF2007 Wednesday Morning

Thermal Barrier Coatings for Gas Turbine Engines: Lessons Learned and Challenges Ahead

Mechanisms Affecting the Durability of Thermal Barrier Systems

Adhesion Energy of a YPSZ EBPVD Layer in Two Thermal Barrier Coating Systems

Numerical Performance Assessment of TBC Microstructures Subject to Foreign Object Damage

Investigation of the Role of Ferroelasticity on the Toughness of Tetragonal (t') Yttria-Stablized Zirconia

Thermo-Mechanical Properties of Thermal Barrier Coatings Subject to CMAS (Calcium-Magnesium-Alumino-Silicate) Penetration

Mechanism Governing Inhibition of CMAS Melt Infiltration Into Gadolinium Zirconate TBCs

CMAS Degradation of Environmental Barrier Coatings

Pulsed DC Titanium Nitride Coatings for Improved Tribological Performance and Tool Life

Mechanical Characterization of CrN and WN Coatings Prepared by Pulsed DC Magnatron Sputtering

High-Performance Ceramics Based on Cr-Al-Si-O Compounds by High Ionization Pulsed Sputtering Technique (H.I.P.®)

The Influence of Nitrogen Additions on the Nanostructure and Properties of Sputtered Ti-Al-B Films

Development of Reactively Sputtered AlN Thin Films for High Temperature Online Stress Monitoring

Effects of Sputtering Conditions on Mo Bottom-Electrode Layer and Its Influence on the Subsequently Sputtered AlN Piezoelectric Thin Film

Electrical Characterisation of AlCuMo Thin Films Prepared by DC Magnetron Sputtering

Investigation of Electrochromic Properties of Tungsten Oxide Films Prepared by Reactive Magnetron Sputtering

Thermal Stability of Sputtered W-Si-N Coatings

Sheet Resistance Effect of the Flexible ITO/PET Substrate on the Electrochromic Performance of Deposited WO₃ Layer

Ion and Laser Beam Assisted Deposition and Modification of Multilayered Coatings

Plasma Diagnostics of Laser Ablation, Magnetron Sputtering, and Cathodic Arc using In Situ Optical Spectroscopy

A Correlation Between Field Emission Properties and Increasing Crystallinity in Lanthanum Monosulfide (LaS) Thin Films

Investigation of MoS₂/Metal Solid-Lubricant Thin Film Coatings Deposited by High-Power Ion Beam Ablation¹

Synthesis of Nanoparticle Coatings by Through Thin Film Ablation

Hybrid Technology Hard Coating - Electron Beam Surface Hardening

Fluorine Laser Irradiation of Cubic Boron Nitride Films: Influence on Internal Stress and Microstructure

Microstructuring of Superhard Pulsed Laser Deposited ta-C Films Using Excimer and Femtosecond Laser Pulses

Synthesis and Tribological Characterization of Mo -(W)- S -Se- (TE) Composite Coatings by Pulsed Laser Deposition

Deposition of Thick Cubic Boron Nitride Films - Mechanisms and Concepts

Investigation of Wurtizitic (B,Al)N Films Prepared on Polycrystalline Diamond

Preparation of Carbon Nitride using Microwave Plasma CVD

The Effect of Nitrogen Atoms Included in CN_x Coating on Friction Sliding Against Si₃N₄ Ball in Nitrogen Gas

Plasma Processing in Carbon Containing Atmosphere for Possible Treatment of Wind Turbine Components

1D III-Nitride Nanomaterials - Superb Photoconductivity and Luminescence

Structural and Electrical Characterization of Laser Debonded AlGaN/GaN HEMTs

Double-Crystal X-Ray Topography of Free-Standing HVPE Grown n-Type GaN and High Resolution PL Studies

GaN Nanowires - Influence of the Starting Material on Nanowire Growth

Centrifuge Technology: A Promising Tool for the Determination of Adhesion and Mechanical Properties!

Comparison Between the Progressive Load Scratch Test and the Mercedes Test and the Effect of the Rockwell Indenter Tip Geometry on the Progressive Load Scratch Test

The Effect of the H/E Ratio on the Adherence of TiN And TiC Coatings Deposited on an AISI H13 Tool Steel

Adhesion Energy of Cu/Polyimide Interface in Flexible Printed Circuits

Controlling the Adhesion Between Diamond-Like Carbon (DLC) Film and High-Density Polyethylene (HDPE) Substrates

Effect of Substrate Plasticity on the Buckling Phenomenon of Coated Materials

Finite Element Analysis of Radial and Tangential Stresses Developed During the Indentation of Coated Steels

Manipulation of Coating and Subsurface Properties in Reconditioning of Carbide Cutting Tools

Mechanical Pre- and Post-Treatment of PVD-coated Cutting Tools

Accelerated Drill Testing Lifetime Response of Coated and Uncoated HSS Jobber Drills to Deep Cryogenic Treatment, Applied at Various Stages of Manufacture

Study on the Effects of MF- and Plasmabooster Etching on the Adhesion of High Performance Coatings

Influence of Edge Preparation on the Performance of Coated Cutting Tools

Pre-Coating Cutting Edge Preparation of Machining Tools by Abrasive Water Jet Blasting

Surface Treatment of Cutting Tools: The Importance of Pre- and Post-Treatment.

Hardness Consideration of NiTi and NiTiAl Thin Films for Various Annealing Temperatures

Piezoelectric Quantum Structures for Full Spectrum Light Emitters

Synthesis and Characterization of Ferroelectric Properties of Ce₂Ti₂O₇ Thin Film

Physical Properties and Preparation of SrBi₂Ta₂O₉ Ferroelectric Films by Pyrolysis and Thermal Annealing

Stable Resistive Switching Behaviors of Sputter Deposited V-doped SrZrO₃ Thin Films

Optimization of the Geometry of the MEMS Electrothermal Actuator to Maximize In-Plane Tip Deflection

Novel Strategies for Low Temperature CVD of Advanced Materials

Joining using Self Propagating High Temperature Synthesis (SHS) of Multilayered Ni/Ti Thin Film Ribbons

Chemical Vapour Deposition Routes to Gold / Semiconductor Nanocomposite Thin Films

Hydrogen Sensing Characteristics of Electrodeposited WO₃ Thin Film Gasochromic Sensor Activated by Pt Catalyst