ICMCTF2006 Wednesday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Wednesday, May 3, 2006 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8:30 AM | 9:30 AM | 10:30 AM | 11:30 AM | |||||||||
| A3-1 |
Effect of Surface Preparation on the Durability of Thermal Barrier Coatings with NiCoCrAlY and Pt-Modified Aluminide Bond Coats
|
Synthesis by Sol-Gel Route and Characterization of Yttria Stabilized Zirconia Coatings for Thermal Barrier Applications
|
Thick Porous and Dense Coatings Using The Solution Precursor Plasma Spray Process
|
Influence of Ternary Additions of Dysprosia on the Phase Stability of EB-PVD TBCs
|
Combined Pre-Annealing and Pre-Oxidation Treatment for Improved Service Life of Thermal Barrier Coatings on NiCoCrAlY Bond Coatings
|
The NiAl/Yttria-Stabilized Zirconia Thermal Barrier Coating Deposited by Using a Hybrid Arc Ion Plating and Magnetron Sputtering System
|
The Thermal Cyclic Performance of NiAl/Alumina-Stabilized Zirconia Thermal Barrier Coatings Deposited Using a Hybrid Arc and Magnetron Sputtering System
|
Potential of ZrO2-YO1.5-TaO2.5 for TBC Applications
|
||||
| B10 |
Heuristic and Atomistic Simulation of Reactive Magnetron Sputtering
|
Reactive Magnetron Sputtering : the Effect of Ion Implantation
|
Linearized Model Analysis and LQR-Based Stabilizing Controller Design for Reactive Sputtering Processes
|
|||||||||
| B2-2 |
Filtered Vacuum Arc Deposition of Undoped and Doped ZnO Thin Films: Electrical, Optical, and Structural Properties
|
Effects of Oxygen Partial Pressure on Film Growth and Electrical Properties for Undoped ZnO Films with a Thickness Below 100 nm
|
Effects of Oxygen Partial Pressure on Doping Properties for Ga-Doped ZnO Films Prepared by Reactive Plasma Deposition with a Traveling Substrate
|
Carbon Based Tribological Coatings - Deposited with Stationary Rates of 100 nm/s
|
||||||||
| B4 |
Characteristics of ZrC Thin Coatings Grown by Pulsed Laser Deposition
|
Film Growth Phenomena in High-Energetic Room Temperature Pulsed Laser Deposition on Polymer Surfaces
|
Wear Resistance and Tribological Properties of Superhard Ta-C Films Deposited on Various Materials by PLD
|
Photocatalysis of TiO2/TiO2-xNx Multilayers by Ion-Assisted Electron Beam Evaporation
|
Relationship Between the Nanostructure and Mechanical Properties of Pulsed Laser Deposited Dichromium Trioxide Thin Films
|
Crystalline Films and Nanowires of Lanthanum Monosulfide
|
Plasma Diagnostics of Hybrid Magnetron Sputtering and Pulsed Laser Deposition
|
|||||
| D2-2 |
The Versatility of Hot-Filament Activated Chemical Vapour Deposition
|
Comparative Study of Diamond-Like Carbon Films from Difference Chemical Sources
|
Predicted Thermal-Mechanical Properties of Carbon Nanostructures: Fullerenes vs. Diamondoids
|
The Characteristics of Diamond-Like Carbon Film Deposited by Filter Arc Deposition
|
Friction and Wear Behavior of Amorphous Hard Carbon (ta-C) Coatings Under Different Lubrication Conditions
|
Hydrophobic and Wear Resistant Amorphous Carbon Based Multilayer Coatings
|
Super-Hydrophobic and Low Wetting Angle Hysterisis Surface Controlled by a-C:H:Si:O Film Deposition and Nano Structuring of Si Surface : Double Rough Structure and Free Energy Calculation
|
Plasma Biasing to Control the Growth Conditions of Diamond-Like Carbon
|
||||
| E3-1 |
Determination of Stress-Strain Curves of Ni and NiCo Coatings Using Nanoindentation Techniques in Combination with Inverse Methods and Microtensile Testing
|
Determination of Tensile Properties by Instrumented Indentation Technique: Representative Stress and Strain Approach
|
Neutral Networks for Determination of Stress-Strain Behavior from Indentation Tests
|
Nanoindentation on the C and C/Si Nanocomposites by the Continuous Stiffness Measurement Technique
|
Mechanical Behavior of TiC Single Layers and Ti/TiN/TiC/TiCN Multilayers on AISI 4340 Steel
|
Density, Stress, Hardness and Reduced Young's Modulus of Tungsten-DLC Coatings
|
||||||
| G7-1 |
A Review on Technological Advances in PVD Equipment from Thermal Evaporation to Pulsed Plasma Deposition
|
Industrial Production of Novel PVD and CVD Coatings - Challenges to Equipment Manufacturing
|
Ways to Improve PVD- and PACVD-Equipment
|
Integration of High Performance Coating Units with LARC-Technology into Manufacturing Processes of SMEs
|
Recent Progress in PVD Process for Hard Coating; from Nano-Structured Coating to Aluminum Oxide Film
|
Hard Coating Characterisation with the Revetest (RVT) Xpress Scratch Tester
|
||||||
| H2-1 |
A New Model Describing the Plasma-Assisted MBE Growth of GaN Thin Films and its Alloys with AlN and InN
|
Investigation of Structural and Rectifying Junction Properties of Thin ZnO-Poly(Styrene-Acrylic Acid) Nanocomposite Films on p-type (100) Si Substrates
|
The Effect of Annealing Time in La3Ga5SiO14 Piezoelectric Films Using Sputtering Deposition
|
Grain Growth in Dielectric-Encapsulated Cu Thin Films
|
Electron Transport in Epitaxial Cu(001)/MgO(001) Layers
|
Joining Using Self Propagating High Temperature Synthesis of Reactive Multilayered Thin Film Ribbons
|
Design and Performance of a Microelectromechanical Systems (MES) Vertical-Lift Electrothermal Actuator (VLEA)
|
Multifunctional Thin Film Sensors Based on Amorphous Diamond-Like Carbon for Use in Tribological Applications.
|
||||