ICMCTF2005 Wednesday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Wednesday, May 4, 2005 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8:30 AM | 9:30 AM | 10:30 AM | 11:30 AM | |||||||||
| A3-3 |
Characterisation of Thermal Barrier Coatings using Impedance Spectroscopy
|
Defect Evolution in Thermal Barrier Coating Systems Under Multi-Axial Thermomechanical Loading
|
Damage Evolution In Plasma-Sprayed TBCs Under Predominant Oxidation Loading
|
Rumpling of a PtAl Bond Coat: Comparison Between Experiment and Simulation
|
Observations and Analyses of Failure Mechanisms in Thermal Barrier Systems with Two Phase Bond Coats
|
Effects of Phase Constituents/Microstructure of Thermally Grown Oxide on the Thermal Cycling Lifetime and Failure of EB-PVD Thermal Barrier Coatings with MCrAlY Bond Coats
|
High Temperature Aging of YSZ Coatings and Subsequent Transformation at Low Temperature
|
Monitoring Damage Evolution in Thermal Barrier Coatings with Thermal Wave Imaging
|
Microstructure Degradation of TBCs under Molten CMAS
|
Thermal Conductivity Imaging of Thermal Barrier Coatings
|
Non-destructive Thermal Barrier Coating (TBC) Damage Assessment using Laser-Induced Luminescence and Infrared Radiometry
|
|
| B8-2 |
Superhard Nanocomposites: Past, Present and Future
|
Effect of Process Parameters on the Properties of Si-Ti-N Nanostructured Coatings
|
The Effect of Ni Addition into nc-TiN/a-SiNx Nanocomposite Thin Films
|
Exploring the Potential of New Nanocomposite Coatings
|
Investigation of the Tribological Properties of Hard Nanocomposite TiN/Si3N4 Coatings on Si Under Dynamic Loading
|
Influence of Si on the Microstructure of Arc Evaporated Ti1-xSixN Thin Films
|
High-Temperature Oxidation Resistance of Ternary Zr-Si-N and W-Si-N Films with a High Si Content
|
Advanced Finite Element Method Modeling of Non-Linear, Pressure-Dependent Mechanical Properties of Superhard Nanocomposites Upon Indentation
|
||||
| D1-1 |
Ion Bombardment for Stress Release in Cubic Boron Nitride Thin Films
|
Microstructure Evolution of Turbostratic Boron Nitride Thin Film Deposited by Sputtering with Ion Bombardment Energy
|
In Situ Deposition of B4C / BCN / c-BN Multilayered Thin Films by r.f. Magnetron Sputtering
|
Boron Carbide and Boron Carbonitride Thin Films As Protective Coatings in Ultra-High Density Hard Disk Drives
|
The Deposition and Characteristics evaluation of BCN Films by Cathodic Arc Evaporation
|
Boron Based and cBN Combination Coatings - Characterization and Application Tests
|
Reactive Magnetron Sputtering of Hard Si-B-C-N Films and Their Properties
|
Synthesis and Properties of CNx Films Deposited by Magnetron Sputtering Amplified by RF Inductive Plasma
|
Nanoindentation Response of High Performance Fullerene-Like CNx
|
|||
| E1 |
Co-Sputtered Mo:S:C:Ti:B Based Coating for Tribological Applications
|
Growth, Structure, and Tribology of Atomic Layer Deposited Hard and Solid Lubricant Thin Films
|
Lubrication of Multilayered and Composite Sb2O3 Doped MoS2, DLC, and MoS2/Graphite Coatings Grown by PVD: Performance and Mechanisms
|
The Effect of Nitrogen and Hydrogen on Reducing Friction of Carbon-Based Coatings
|
Tribological Properties of Oriented Carbon Nanotube Coatings Produced by Plasma-Enhanced Chemical Vapor Deposition
|
Nano Tribological Properties of Perfluoropolyether-Coated Magnetic Disk Evaluated by Vertical and Lateral Vibration Wear Tests
|
Influence of Oxide Phase Formation on the Tribological Behaviour of Ti-Al-V-N Coatings
|
Superelastic (Cr,Al)N Coatings for High End Spindel Bearings
|
Tribological Behaviour of Self-Lubrication Coating Deposited using Electrolytic Plasma Process
|
|||
| H3 |
Macroscopic Hierarchical Nanowire Thin Films and Devices
|
Hetero-Epitaxy Growth of B12P2 on Various Substrates by MOCVD
|
Electrolytic Deposition of Titania Films as Interference Coatings on Biomedical Implants: Microstructure, Chemistry and Nanomechanical Properties
|
Structure-Electrical Properties Relationship of Sodium Superionic Conductor Sputter-Deposited Coatings
|
Parameterized Approach to MEMS Mechanical Gear Design
|
Deposition of TaN Thin Films by DC-Magnetron Sputtering of Ceramic TaN Sputtering Targets
|
Memory Effect of Sol-Gel Derived V-doped SrZrO3 Thin Films
|
Protein Immobilization on Thin ZnO Films Grown on (100) p-Si for Biosensor Applications
|
Deposition and Characterization of a Novel Integrated ZnO Nanorod/ZnO Thin Film Structure on Glass
|
|||
| TS2-1 |
Future Demands for Surface Treatments in Engines
|
Surface Treatment Seletion for Automotive Applications
|
Application of CrN Coatings on Piston Rings
|
Applications of Arc PVD Coatings for Automotive Parts
|
Industrial use of Plasma Deposited Coatings for Components of Automotive Fuel Injection Systems
|
Tribological Systems Compatible to Environment Through the use of Suitable Material Compounds at the Rolling Bearing Example
|
Coating Design for Automotive Applications
|
A Synergistic Approach on DLC Coatings for Performance Engines Applications
|
||||