The Effect of Nitrogen on the Formation and Oxidation Behavior of Iron Aluminide Coatings Fabricated by Chemical Vapor Deposition

Aluminum Diffusion in Alumina Scales Grown on Fe-Cr-Al Alloys

Microstructure, Composition and Oxidation Resistance of Nanostructured Ni-Al-N Coatings Produced by Magnetron Sputtering

(Ti,Al)N Coatings for Aluminum Die Casting Dies: a Study of the Reactivity Between Ti_1-xAl_xN and Aluminum.

Coatings for Extreme Environments in the Bearing Contacts

Structure, Bonding, and Adhesion of MoSi₂/Fe and SiO₂/MoSi₂ from First Principles

On the Strength of TiAlN Following to High Temperature Operations

A Multifunctional Boron Coating on Metal Substrate

Microstructural and Tribological Characteristics of DLC Coated Al₂O₃ at Elevated Temperatures

Remarkably Adherent, Thick and Tough Chromia (Cr₂O₃) Coatings on Steel Made by a New Process.

Characterization of Hybrid Plasmas Produced by Laser Ablation and Pulsed DC Magnetron Sputtering

Laser-Arc-Module System for Industrial Series Deposition of Super Hard Coatings

Pulsed Laser Deposition of Lanthanum Sulfide Thin Films

Reduction of Particulates and Stress in c-BN Films Prepared by Ion-Assisted Pulsed Laser Deposition

Industrially-Scaled Large-Area and High-Rate Tribological Coating by Pulsed Laser Deposition

Adhesion of Superhard Pulsed Laser Deposited ta-C films with Low Internal Stress on Silicon, WC-Hard Metal and Steel

Hard Zirconium Carbide Thin Films Grown by Pulsed Laser Deposition

Designed Coatings: Correlation of Coating Properties to Application Results

Effect of Film Thickness and Ti Interlayer on the Structure and Properties of Nanocrystalline TiN Thin Film Deposited by Unbalanced Magnetron Sputtering

Residual Stress Development in UMS TiN Coatings

The Effect of Plasma Immersion Ion Implantation on the Hardness and Composition of Cathodic arc deposited Titanium Nitride Thin Films

Structural and Chemical Properties of Sputtering Deposited Ti-Ge-N Thin Films

Decomposition of Supersaturated Ti-Al-N

High Thickness Ti/TiN Multilayer Thin Coatings for Wear Resistant Applications

Interface Broadening due to Ion Mixing During Thin Film Growth in Plasma-Enhanced Chemical Vapor Deposition Environment

In-Situ Spectroscopic Ellipsometric Determination of Morphological and Electronic Properties of Plasma Deposited Ultra-Thin Metal Films

In-Situ Characterisation of Radiofrequency Magnetron Sputter Deposition of SiO_x using Elastic Recoil Detection

Characterization of an Ar/O₂ Magnetron Sputtering Plasma using a Langmuir Probe and an Energy Resolved Mass Spectrometer

In-Situ Ellipsometry Measurement of Palladium Caped Yttrium Thin Films during Hydrogenation and Dehydrogenation

Uniform Coating of DLC Film by Means of PBIID Process using Superimposed RF and High-Voltage Pulses

A Crystal Chemical Approach to the Formulation of Self-Lubricating Nanocomposite Coatings

In-Situ Formation of Self-Lubricating Tribofilms for Dry Machinability

Dry Machining using Novel Chromium Based Coatings: Drawbacks and Opportunities

Dry-Drilling of Aluminum using Carbon-Based Tool Coatings

Smart Tools: Wear Resistant Coating System with Integrated Thin Film Sensors for flank wear measurement

Nearing No-wear Conditions of Surface Tooling in Dry Cutting by Applying External Magnetic Field

The Effect of Solid Lubricants on Tool Performance During Wet, Gas-Cooled and Dry Drilling

Tribological Adaptability of TiAlCrN PVD Coatings under High Performance Dry Machining Conditions

Nanotribological Testing of Nickel and DLC Coated Nickel for Microdevice Applications

Phase Transformation and Hardness of the Ni-P-Al Ternary Coatings under Thermal Annealing

Ageing Under Mechanical Stress of a Silver Based Multilayered Mirror

Indenter Surface Area and Hardness Determination by Means of a FEM-Supported Simulation of Nanoindentation at Low Penetration Depths

The Effects of Pulse Frequency and Substrate Bias to the Mechanical Properties of CrN Coatings Deposited by Pulsed DC Magnetron Sputtering

Use of Certified Reference Materials in Instrumented Indentation: Improved Methods for Indirect Calibrations

Analysing Nanoindentation Unloading Curves using Pharr’s Concept of the Effective Indenter Shape

The Effect of Heat Treatment on the Mechanical Properties and Microstructure of CrN/AlN Multilayer Coatings

Mechanical Behaviour of Thin Films Deposited on Ductile Substrates: Cracking and Critical Parameters for Damage Evolution

Combination of Normal and Lateral Force-Displacement Measurements as a New Technique for the Mechanical Characterization of Surfaces and Coatings