Novel Composite Coating Technology in Primary and Conversion Industry Applications

Wear Observations of PVD TiAlCrY(O)N Coated High-Speed Milling Tools at Cutting Temperature up to 950°C

Synthesis and Characterization of Nanolayered TiB₂/TiC Multilayers for Dry Machining and High-Temperature Tribological Applications

Thermal Spray Coatings for High Temperature Wear Applications - An Overview

Designing Low Thermal Conductivity, Thermal Barrier Coatings

Evaluation of the Low Conductivity Ceramic Thermal Barrier Coating for Aero-engine Turbine Blades by the "Herringbone" Process

Influence of Bond Coat Surface Geometry on the Spallation Life of Ni(Pt,Al)/EB-PVD Thermal Barrier Coatings

A Monte Carlo Model for Predicting the Erosion Rate of EB PVD TBCs

Microstructures and Crystallographic Texture of EB-PVD TBCs on Flat Surfaces as a Function of Position in the Chamber

Growth and Characterization fo Single Crystal Ti₃SiC₂(0001) Thin Films

Wear Protective Coatings Consisting of TiC-SiC-C Deposited by Magnetron Sputtering

Properties of TiSiN_x Deposited by Concurrent Cathodic Arc Evaporation and Magnetron Sputtering

Microstructure and Mechanical Properties of Nanostructured Ti-Si-N Coatings

PVD Grown (Ti,Si,Al)N Nanocomposite Coatings and (Ti,Al)N/(Ti,Si)N Multilayers: Structural and Mechanical Properties

Structure and Mechanical Properties of Superhard Thin Films

Tough Nanocomposite Coatings: Design and Testing

Mechanical Properties and Tribological Behavior of Al/Al₂O₃ and Ti/TiN Multilayer Nanocomposite Thin Films

Effect of the Substrate Bias on the Microstructure of Polycrystalline CrN/NbN Superlattice Coatings Grown by the Combined Cathodic Arc / Unbalanced Magnetron Sputtering Method

Corrosion Resistance of CrN/NbN Superlattice Coatings Grown by Various Physical Vapour Deposition Techniques

Synthesis, Characterization and Properties of Ti₃SiC₂ Thin Films Deposited by PLD

Effect of Ultra Dispersed Diamonds on Mechanical Properties of Alumna Composite Coatings

Investigation on TiO_x Coatings Produced using Variable Magnetic Field Magnetrons in Dual Bipolar Pulsing Mode.

Hetero-Epitaxial Growth and Optical Properties of LaF₃ on CaF₂

Optical Constants and Roughness Study of DC Magnetron Sputtered Iridium Films

Metallization of Ceramic Vacuum Chambers for SNS Ring Injection Kicker Magnets

Sputter Deposition of Silicon-Oxide Optical Coatings

Zirconia and Zirconium Silicate Thin Films Deposited by Magnetron Sputtering

Properties of Nickel Oxide Thin Films Deposited by Reactive Magnetron Sputtering

Effect of Frequency and Pulse Width on the Properties of DLC Films Prepared by FCVA Together with Substrate Pulse Biasing

Influence of rf Substrate Bias on SiO₂ Films Prepared by ECR-PECVD

Thin Films of Copper : Aluminum Alloy by Electron Beam Evaporation Technique: Effect of Substrate Temperature on Electrical and Optical Properties

Effect of Oxide Growth Temperature on the Electrical Performance of Extremely Thin ( ~3 nm) Oxides of Silicon

Hard Coatings by Conversion of Silicon Carbide to Diamond-Structured Carbon

Very High Growth Rate Chemical Vapor Deposition of Single-Crystal Diamond

Decrystallization of Diamond Under Pulsed Excimer and YAG Lasers and Subsequent Lattice Relaxation

Enhancing Nucleatin Density & Adhesion of Polycrystalline Diamond Films Deposited by HFCVD Using Surface Treatments on Cemented Tungsten Carbide

Time-modulated Deposition of Smooth Polycrystalline Diamond Films Using CVD

Fabrication of Tubes of Diamond with Micrometric Diameters and Their Characterization

Cathodoluminescence Characteristics of Polycrystalline Diamond Films Grown by Cyclic Deposition Method

Friction and Durability of Monolayer Lubricants for MEMS in Harsh Environments

Impact of Variable Loading Conditions on Fretting Wear

ESD Coatings on Small Caliber Gun Barrels

Reduction of Tool Wear in Metal Cutting Using External Electromotive Sources

Some New Perspectives on Gun Bore Erosion Mechanisms Using Laser Pulse Heating

Corrosion Behaviour of Amorphous Al-Cr and Al-Cr-(N) Alloys Deposited by dc Magnetron Sputtering on Mild Steel Substrate.

Corrosion Behavior of Unbalance Magnetron Sputtered TiN Films on 304 Stainless Steel

Performance of Nanoscale CrN/NbN PVD Coatings on Mild Steel in Various Corrosion Tests

The Tribological Performance of Ultra-Hard Ceramic Composite Coatings Obtained Through Micro Arc Oxidation

Composite Bearing Based on Metal - Polymer - Soft Metal - Ceramics Composition

The Use of XPS in Thin Film and Multilayer Characterization of Binary and Ternary Oxides

Ultrathin Oxides: Real-time XPS Study of Corrosion Resistance ¹

Analysis of Sputter Deposited ITO-layers by XPS

Microstructure and Chemistry of Annealed AlCuFeCr Quasicrystalline Coatings

Electronic Properties of Cr_1-xAl_xN Thin Films Deposited by Reactive Magnetron Sputtering

Investigation of the Residual Stresses and Mechanical Properties of (Cr,Al)N Arc PVD Coatings Used for Semi Solid Metal (SSM) Forming Dies

New Residual Stress Measurement in Textured Thin Film by Grazing Incidence X-ray Diffraction

Growth and Structure of Silica Films Deposited by Plasma-enhanced CVD on Polymeric Materials

Localized Deformation of Multicomponent Thin Films

Carbon Coatings for Dry Machining and Forming Operations Deposited by Non-reactive (ta-C) and Reactive (a-C:H:Me) Cathodic Arc Processes

Performance of Lubricant Coatings in Dry Drilling Processes

Performance and Limitation of Hybrid (Hard Coating) - PVD Magnetron Sputtering (Mos₂/Ti Composite) Coated Inserts Tested for Dry High Speed Milling of Steel and Grey Cast Iron

New Material Classes for Dry Lubricant Coatings

Polishing of CVD Diamond Coated Tools and Their Application in Dry Machining of Aluminum-Silicon Alloy

Investigating Nitriding and Duplex Surface Treatments for the Reduction of Dissolution and Soldering in Die Casting Shot Sleeves

Performance of Coatings Against Wear in Dry Blanking and Forming

Performance of New Maxit^TM AlTiN Coatings in Dry and High Speed Cutting

Synthesis and Properties of TiAlBN Coatings for Dry Cutting Applications

Innovative Mono and Multilayer Hard and Autolubricant PVD Coatings for Dry Stamping Operations

Tribological Coatings for LIGA MEMS

Carbon Films for Microelectromechanical Systems (MEMS): a Nanotribological Study

Ultrananocrystalline Diamond MEMS: Properties and Applications

Tribology of Carbon Films and Carbon-based Mems Devices

Lubrication and Wear Control of Microelectromechanical Systems (MEMS) Using Fluorocarbon Monolayers and Diamond-Like Carbon

MEMS Devices Made from Stress-free Tetrahedral Amorphous-carbon*