ICMCTF2002 Tuesday Morning

Factors Affecting The Thermal Conductivity of Oxide Coatings

Combined Mode I and Mode II Fracture of Thermal Barrier Coatings

Structural, Thermal and Elastic Properties of Plasma Sprayed Thermal Barrier Coatings

High Temperature Corrosion Resistance and Microstructural Evaluation of Laser-glazed Plasma-sprayed Zirconia/MCrAlY Thermal Barrier Coatings

Determination of Mechanical Properties of Electron Beam-physical Vapor Deposition-thermal Barrier Coatings (EB-PVD-TBCs) by Means of Nanoindentation and Impact Testing

Morphological Evolution of the Thermal Barrier Coatings Induced by Cyclic Oxidation

Round Robin PSLS Analysis of EB-PVD TBCs

Microanalysis of Hot Corrosion on a Plasma-sprayed Zirconia/MCrAlY Thermal Barrier Coating

Effects of Low-energy Ion Irradiation During Nucleation and the Early Stages of Film Growth

The Effect of the Substrate on the Annealing Behaviour of W-Si-N Sputtered Films

Growth and Properties of Metastable δ-TaN_X Layers

Multilayer Oxide Coatings by Closed Field Unbalanced Magnetron Sputter Ion Plating

The B-C-N Triangle - a Suitable System for the Production of Thin Films with High Load Carrying Capacity

Mechanical and Tribological Properties of CrBN Coatings

Ir-base Multi-element Coating on Tungsten Carbide by RF Magnetron Sputtering Process

Tribological Behavior of Candidate Coatings for Al Die Casting Dies

Deposition and Characterization of Ti(CNO) Coatings Deposited by Unbalanced Magnetron Sputtering

The Physical Properties of Titanium Aluminium Chromium Nitride Coatings Deposited by Closed Field Magnetron Sputter Ion Plating

A New Method for Vacuum Deposition of Polymer Films

Investigation Of Sputtered HfF₄ Films and Application to Interference Filters For Thermophotovoltaics

High-Luminance Thin-Film Electroluminescent Devices Using Y₂O₃:Mn Phosphor

Photoluminescence from Highly Oriented Mg_xZn_1-xO Films Grown by Chemical Spray Pyrolysis

Photoelectric and Luminescent Properties of Pentacene Films Deposited on n-Si by Thermal Evaporation

Investigation of Amorphous Tungsten Oxide Thin Film from Far Infrared to Ultraviolet Spectrum

Growth and Characterization of New OLED with Samarium Complex as Emission Layer

Towards Field Emission Devices Based on Carbon Nanotubes

Growth of Carbon Nanowires

Growth and Characterization of Vertically Aligned Carbon Nanotubes

Electron Structure of the Carbon Nanotubes Studied by X-ray-absorption Spectroscopy

Effects of Catalyst Preparation on the Growth of Carbon Nanotubes

Multiscale Modeling of Polycrystalline Diamond and Other Carbon-based Systems

The Properties of Carbon Nitride Nanotubes Synthesized by Electron Cyclotron Resonance Plasma

Structure and Tribological Properties of Molybdenum Disulphide Multilayer Films

Analysis of Sputter Deposited W-S Coatings in the Presence of Gaseous Ar, Ar+N₂, and/or Ti Filtered Arc Plasmas

MoS₂-Ti Composite Coatings Deposited by Closed-Field Unbalanced Magnetron Sputter Ion Plating: Mechanical-Tribological-Structural Characterization

Modification of Contact Surfaces by Fullerene-like Solid Lubricant Nanoparticles

Mechanisms of Ultra-low Friction by Inorganic Fullerene-like MoS₂ Nanoparticles

Performance of CrN/MoS₂(Ti) Coatings for Stamping Dies

Mechano-Chemical Method for Tribological Coating

Performance and Limitation of MoS₂/Ti Composite Coated Inserts Tested for Dry, High Speed Milling and Turning of Steel and Grey Cast Iron

Microstructure and Tribological Properties of Plasma-sprayed Chromium Oxide-molybdenum Oxide Composite Coatings

The Cutting performance of PVD-coated Tools in Dry Machining

Finite Element Modelling Of Stress Development During Deposition Of Ion Assisted Coatings

Mechanical and Thermal Behaviour of Coating-Substrate-Systems Investigated with Parallel FE

Determination of the Thermal Expansion Coefficient and of the Tensile Strength of a Polycrystalline TiAl₃ Layer, Formed by Solid State Reaction

In Situ Observations of the Stress Evolution and Delamination Kinetics of Thin Ta films on Si (100)

Fracture Mechanisms in Nano-scale Layered Hard Thin Films

An International Round-robin Experiment to Evaluate the Consistency of Nanoindentation Hardness Measurements of Thin Films

Surface Acoustic Wave Techniques to Characterize Thin Film Mechanical Properties

Dynamic Mechanical Analyses of Thin Polymer Films

Measuring the Adhesion of Sol-Gel Coatings to a Ductile Substrate by an Indentation-based Method

New Strength Evaluation of Thin Films on Substrates in Terms of Adhesion and Cohesion

Challenges for Industrial Scale Up and Implementation of High-Performance Coatings for Metal-cutting Applications - The Indian Experience

Ti(B,N) and TiB₂ Coatings Produced by PACVD

Advantages of Cylindrical Rotating Magnetrons in Metallic and Reactive Sputter Processes

SimCoat- a Simulation Program Package for Industrial Vacuum Arc Coaters

Prototype of Compact Module of High Energy Pulsed Plasmas for Surface Treatment of Materials

Validity of Laboratory Tests in Predicting the Behavior of Coated Surfaces in Production Die Casting

Performance of Innovative Dry Lubricant Coatings in Industrial Field Tests at the BMW Group

Characterisation of Inductively Amplified Magnetron Devices Implanted in an Industrial PVD System

Manufacturability of the Copper Electrodeposition Process

New Developments in Mechanical Surface Testing

Ohmic Metallization Technology for Wide Band-Gap Semiconductors

Ti-Cr-Al-O Thin Film Resistors

Characterizations of Organic Thin Film Transistors Fabricated on SiN_x Films by Non-photolithographic Processes

Growth and Properties of Titania Thin Films Obtained by Magnetron Sputtering

Ohmic Metallization of n-Type GaN

Ionized Physical Vapor Deposition of TiN Barrier Layers with the Presence of Metal-Organic Precursors: Chemical Enhanced Physical Vapor Deposition (CEPVD)

Radiation Effect of Vacuum Ultraviolet from H₂ and O₂ Plasmas on SiO₂ Aerogel Film

Investigations of Non-selective and Inverse-selective Process on Cu Damascene CMP in Colloidal Silica-based Slurry