Microstructure Stability Issues in Searching for New TBC Materials

The Effects of Oxidation on the Failure of Thermal Barrier Coatings

Directed Vapor Deposition of Platinum Modified Nickel Aluminide Bond Coat Layers

Development of Cyclic Displacement Instabilities in Pt-modified Bond Coats

Measuring the Mechanical Properties of Platinum Aluminide Bond Coats for Thermal Barrier Coatings

Influence of Bondcoat Pre-treatment and Surface Topology on the Lifetime of EB-PVD TBCs on IN100+PtAl BC

Composite and Nanolaminate Ceramic Coatings Prepared by PVD Techniques for High Temperature Applications

Measuring Fatigue Crack Propagation in Plasma Sprayed Y-PSZ Ceramic Coatings

Laser Forward Transfer of Sensor and Battery Materials for Novel Device Applications

Pulsed Laser Deposition: a New Technology for Coating of Sheet Materials and Three Dimensional Industrial Components

Magnetron Sputter Pulsed Laser Deposition: Technique and Process Control Developments

Industrial Laser-Arc Coater for the Deposition of Superhard Amorphous Carbon Films (Diamor)

Study of Mechanical and Tribological Properties of WC/TiC and WC/B₄C Multilayer Films Deposited by Pulsed Laser Deposition

Using Lasers for the Production of Ceramic Coatings

Femtosecond Pulsed Laser Deposition of Diamond-like Carbon Films for Tribological Applications

Different Tribological Behavior of MoS₂ Coatings Under Fretting and Pin-on-Disk Conditions

Fretting Wear Behavior of a Cu-Ni-In Plasma Coating

The Role of Transfer Films in the Wear of Poly(methylmethacrylate)

Friction-induced Structural Transformations of DLC Coatings under Different Atmospheres

Friction Mechanisms of Amorphous Carbon Nitride Films under Variable Environments: a Triboscopic Study

Quantifying Transfer Film Thickness by In Situ Raman Tribometry

A Comparison Study of Alkyl- and Aryl-phosphate Vapor Phase Lubricants

Influence of EP and AW Additives on the Tribological Behaviour of Hard Low Friction Coatings

Wear Resistance of a High Nitrogen Austenitic Stainless Steel Coated with Nitrogenated Amorphous Carbon Films

Tribomechanical Properties of Self Lubricated Oxide Ceramic Hard Coatings

Hertzian Analysis of the Self-Consistency and the Reliability of the Indentation Hardness Measurements on Superhard Nanocomposite Coatings

Understanding of Automotive Clearcoats Scratch Resistance

Scratch Resistance and Adhesion Testing of Optical Fiber Coatings

Mechanical Properties Evaluation of Cathodic Arc Plasma Deposited CrN Thin Film on Fe-Mn-Al-C Alloy

Mechanical Characterization of Ni-P-based Ternary Coatings by RF Magnetron Sputtering

Functionally Gradient Nitrogen Diffusion/Cr Ion Plating Treatment on 4340 Steel

New Unidirectional Single Pass Procedure Using Wear Tester Equipment for Assessment of Suitable Coatings and Other Materials for Forming Operations

Structual and Mechanical Properties of Sputtered Tin-nitride Thin Films

Some Technology Transfer Issues in Surface Engineering for Corrosion and Tribology

Opportunities for Surface Engineering in Aerospace Systems

Aerospace Coating Needs in the 21st Century -- From a Boeing Perspective

One Terabit per Square Inch: a Thin Film Perspective

Modelling Thermal Spray Coating Processes: A Powerful Tool in Design & Optimization

Special Surface Modification Needs in the Heavy Equipment Industry

Surface Engineering for Metal Cutting Applications

Component Coating Providers - Design Partners or Mere Sub-suppliers?

Surface Engineering of Machine Components

Needs and Opportunities for Standardized Test Methods for Ceramic Coatings in Vehicular and Stationary Power Engines