ICMCTF2001 Wednesday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Wednesday, May 2, 2001 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | ||||||||
| A2-1 |
New PVD Coatings Applied to Dies for Extrusion of Aluminium
|
Influence of Deposition Temperature and Time During PVD Coating of CrN on Corrosive Wear in Liquid Aluminium
|
Development and Implementation of Plasma Sprayed Nanostructured Ceramic Coatings
|
New Coatings for Continuous Casting Rolls
|
Tribological Behaviour of Coatings for Continuous Casting of Steel
|
High-Rate Sputter Deposited Tantalum Coatings on Steel for Wear and Erosion
|
Laser Pulse Heating of Protective Coatings for Large Caliber Gun Bores
|
High Temperature Erosion Protective Coatings for Turbomachinery Use
|
Erosion Testing of Coatings for V-22 Aircraft Applications
|
||
| B1-3 |
A Simple Cathodic Arc Macroparticle Filter
|
Laser-Arc - Laser-Induced, Pulsed Vacuum Arc Deposition: Process, Technology and Applications
|
Preparation of Ti Targets with Different Grain Size for the Arc Ion Plating Method
|
Calculation and Measurement of the Time Dependend Erosion Rate of Electromagnetically Steered Rectangular Arc Cathodes
|
Simulation of Vacuum Arc Deposition in Industrial Coaters
|
Properties of Super Hard Metal Nitride Coatings Deposited by Plasma Enhanced Arc-Cathode
|
Characterisation and Performance of Partially Filtered Arc TiAlN Coatings
|
Properties of Coatings Deposited Using a Filtered Vacuum Arc Carbon Plasma Source
|
Low Temperature Cathodic Arc Deposition
|
Deposition and Characterization of Sub-Stoichiometric Titanium Carbide Film by Filtered Cathodic Vacuum Arc Technique
|
|
| C2-2 |
In-Situ Stress Measurements of Thin Films
|
Graded Cermet Selective Coatings Based on Aluminium Deposited by Magnetron Sputtering Technology
|
ZnS Sol-Gel Deposited Films: The Characteristics of the Sulphidation Process
|
Significant Structure and Property Variations on Si-C-N Films Via the Wet Etching Treatment of the Si Substrate
|
Optical , Electrical and Compositional Studies of Silicon Nitride Thin Films
|
Poster C Summary Session
|
|||||
| D2-2 |
Morphology Variation of Diamond With Increasing Pressure Range up to 400 Torr During Deposition Using Hot Filament CVD
|
Thermal Plasma CVD of cBN and Diamond Films - Similarities and Differences
|
Diamond (Heteroepitaxial) Nucleation by Ion Beam Impact: A Reality
|
Synthesis of Diamond-Like Carbon Films by Plasma Electrolytic Deposition
|
Metal-Carbon Composite Coatings with Nanostructure: Creation and Properties
|
Comparison of the Structure and the Mechanical Behavior of Conventional and Ca-O-Modified Diamond-Like Carbon Coatings Synthesized by a Direct Current Discharge
|
Wear Resistant Carbon Coatings Deposited Without Substrate Bias Voltage
|
||||
| E1-2 |
The Influence of Temperature and Humidity on Wear of MoS2 and MoST Films
|
Microstructure, Chemistry and Tribology of MoSx/Au and MoSx/WSey Co-Sputtered Composites
|
Chemical Effects in the Tribology of Sputter-Deposited Metal/MoS2 Films
|
Elimination of Lubricants in Industries in Using Self-Lubricating Wear Resistant Coatings Based on MoS2
|
Role of Transfer Film on Wear Life of Ti-doped MoS2 Coatings in Moist Air
|
Fretting Wear Behavior of Moisture-Resistant MoSx Coatings
|
Preparation of Ni-P-MoS2 Solid lubricant Films by Using Different Surface Detergents
|
Mechanical Solicitations and Dissipated Energy Influence on a Copper/2D Woven Carbon-Carbon Composite Couple Crossed by an Electrical Current
|
Enhancement to the Tribological Properties of Titanium Using Plasma Electrolytic Oxidation and Plasma-Immersion Ion Assisted Deposition Techniques
|
||
| F1/E4-2 |
High Cycle Fatigue of Thermal Spray Coatings and Substrates
|
Interfacial Adhesion to Study the Role of Residual Stresses Upon Adhesion of Thermal Sprayed Coatings
|
An Evaluation Software of the Impact Test Results to Quantify the Creep Behaviour of Monolayer Thick Plasma Sprayed Coatings
|
Interpretation of Coated Tools Performance in Milling and in Impact Testing Based on Thin Hard Coatings Stress-Strain Curves
|
Mar Resistance of Automotive Clearcoats
|
Surface Engineering With Graded Multilayer Coatings: A Numerical Study Based on the Boundary Element Method
|
A Study of Fatigue Behavior of DLC Films Using Acoustic Emission Monitoring
|
Evaluation of the Fracture Toughness of Silicon Carbide Thin Films through Two Different Indentation Techniques
|
Measurement of Mechanical Properties of Single and Multi-layered Nitride Thin Films by Depth Sensing Nanoindentation and SEM/AFM Techniques.
|
Properties of Al2O3 Films Deposited Using PVD Twin-Mag Sputtering.
|
On the Evaluation of the Absolute Hardness of TiNx and TiC Deposits
|
| G1-1 |
Control of Ionization in Magnetron Sputtering:fromCathode Design to Film Properties
|
Ensuring Long Term Stability of Process and Film Parameters During Target Lifetime in Reactive Magnetron Sputtering
|
Automated Reactive Sputtering
|
Industrial Precision Deposition by Filtered High Current Arc
|
An Effective Way to Improve the Coated Tool Performance Through Annealing
|
Improvement of PVD Coated Inserts Cutting Performance, Through Appropriate Tool Pre- and Post-Treatments
|
Optimisation and Characterisation of a TCP Type RF Broad Beam Ion Source
|
Ion Density Studies in Vacuum Arc Plasmas Passing Through an Off-Plane Double Bend Magnetic Filter
|
Room Temperature Deposition of High-Purity Silicon Oxide Films by rf Plasma-Enhanced CVD
|
||
| H1-2 |
New Concepts in Formulating Diffusion Barriers/Adhesion Promoters for the Interconnect Technology of Tomorrow
|
Integration Schemes of HDP-FSG for 0.18 µm Logic Process
|
Filtered Cathodic Vacuum Arc Deposition of Thin Film Copper
|
Integration of MOCVD Titanium Nitride with Collimated Titanium and Ion Metal Plasma Titanium for 0.18 µmm Logic Process
|
Interconnect Degredation
|
Thermomechanical Properteis of a-Si:H and a-Ge:H
|
|||||