ICMCTF2000 Wednesday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Wednesday, April 12, 2000 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8:30 AM | 9:30 AM | 10:30 AM | 11:30 AM | |||||||||
| A1 |
Oxidation and Corrosion Protection for SiC Fibers with CVD Mullite Coatings
|
Current Status of Environmental Barrier Coatings for Si-based Ceramics
|
Coating of Carbon Ceramics via Reaction with Metal Powders
|
Wettability of NiAl, Ni-Al-N, Ti-B-C, and Ti-B-C-N Coatings by Glass at High Temperature
|
Performance of Stabilised Dicalcium Silicate Coatings in Hot-Corrosive Environments
|
Effect of Composition on the Oxidation and Hot Corrosion Resistance of NiAl Doped with Precious Metals
|
A Study of the Diffusional Response of Refractory and Other Elements in Multi-Component Systems Prior to and During CVD Aluminizing
|
Influence of Surface Treatment on the Oxidation of MCrAlY Coatings
|
The Effect of Ni-Re Interlayers on Interdiffusion from MCrAlY Overlay Coatings
|
Depth Profile and Quantitative Trace Elemental Analysis of Diffusion Aluminided Type Layers on Ni-base Superalloys Using High Resolution Glow-Discharge Mass Spectrometry
|
||
| B4 |
Recent Advances in the Post-treatment of Hard Coatings
|
Improvement of the Mechanical Properties of Austenitic Stainless Steel after Plasma Nitriding
|
Helicon Assisted Sputtering
|
Coatings are not a Failure of the Surface: Performance and Reliability of Coatings vs. Degradation and Damage Pattern
|
Invited - Missing - Funatani
|
Square Wave Low-frequency Modulation of the Discharge Current for High Rate Deposition of Stoichiometric Ceramic Films
|
Hot Target Sputtering : a New Way for High Rate Deposition of Stoichiometric Ceramic Films in the Elemental Sputtering Mode
|
Metal Vapor Source with High Intensity Flow for Thin Film Deposition
|
||||
| C5 |
Invited - Missing - McGahan
|
Optical Properties of Amorphous Tantalum Oxide Thin Films Measured by IR-VIS-UV (0.03eV-8.5eV) Spectroscopic Ellipsometry*
|
A New Combined Instrument with UV-visible and Far Infrared Spectroscopic Ellipsometry for Optical Thin Film Characterization
|
Generalized Ellipsometry for Novel Optical Materials
|
Ellipsometry on Thin Layers of Biological Interest: Characterization and Applications
|
Ellipsometric Investigation of the Si / SiO2 Interface Formation for Application to Highly Reflective Dielectric Mirrors.
|
Characterization of Thin-film Amorphous Semiconductors Using Spectroscopic Ellipsometry
|
Non-destructive Testing by means of Spectroscopic Ellipsometry: Fingerprint Spectra vs. Modelling
|
||||
| D4/E5 |
Structure and Mechanical Properties of TiC/Amorphous Hydrocarbon Nanocomposite Coatings
|
The Deposition and Properties of Me-DLC Coatings Deposited by DC Magnetron Sputtering
|
Applications of Carbon-Based Coatings Prepared by Physical and Chemical Vapour Deposition Processes
|
Tribological and Corrosion Properties of Ultra Thin Overcoats Deposited by PECVD
|
Low Stress Diamond Like Carbon (dlc) Films Deposited using Filtered Cathodic Arc
|
Friction and Wear Properties of ta-C Coated Plasma Nitrided Steel in Unidirectional and Reciprocating Sliding
|
Effects of Gas Pressure and Bias Voltage on the Properties of Amorphous Carbon and Carbon Nitride Films Produced by Plasma Enhanced CVD
|
CNx and DLC Films with extremely low Roughness
|
Design of W Buffer Layer for Adhesion Improvement of DLC Films on Tool Steels
|
|||
| E2 |
An Experimental Approach to Determine the Critical Parameters Related to the Mechanical Stability of Coated Systems
|
An Energy Description of Hard Coatings Wear Mechanisms
|
An Induction Period for the Abrasion of Steel by Diamondlike Carbon
|
Relationship of Hardness and Microstructure to the Wear Resistance of DLC Coatings
|
Deposition and Tribological Evaluation of Alumina/Aluminum Nano-Composite Coatings
|
Tribological Performance of Sprayed WC/Co Coatings
|
Tribology of Sol-gel aAumina Coated Al Alloys
|
Analytical Modelling of Mechanical Contact Problems on Multilayer Systems
|
Effect of Annealing Treatment and Fe2O3 Addition on the High Temperature Tribological Behavior of the Plasma Sprayed Zirconia Coating
|
Multifunctional Co-sputtered Cermet Coatings
|
||
| F1/E4-3 |
Mechanical Properties of Composites and Mixtures with Bichalcogenides as Main Constituent
|
Surface Profiling of Coated Stents
|
Thickness Dependence of Mechanical Properties of on-Wafer Low-k Ultrathin Polytetrafluoroethylene Films
|
Mechanical Characterization of Ceramic Coatings
|
Determination of Mechanical Properties of Thick Coatings Produced by the Plasma Spray Method
|
A New Method of Determining Strength and Fracture Toughness of Thin Hard Coatings
|
Analysis of Cracking of Thin Coatings on a Metal Substrate
|
Qualitatively Study of Beta Silicon Carbide Residual Stress by Raman Microscopy
|
Tribological and Mechanical Properties of a TiC/VC Modulated Multilayer Hard Coating
|
|||
| G1 |
Combined Reactive Deposition of TiAlN or CrN and Non-reactive MoS 2
|
Reactive Deposition of Nitrides and Oxides Using a Twin-Cathode Inverted Cylindrical Magnetron
|
Closing the Coating Thickness Gap: LPPS Thin Film Technology
|
Enhancement of Machine Tool Spindle Performance Through Hybrid Bearings with Low temperature PVD coated rings
|
CrN/NbN Superlattice Coatings Grown by the Cathodic Arc Evaporation Technique
|
Microstructure and Properties of PIRAC Nitrided NiTi Surgical Alloy
|
||||||
| H4 |
An Emerging Role of Pulsed Laser Deposition in Growth of Wide Band Gap Metal-oxides and Ill-nitrides for Optoelectronics and High Temperature Devices
|
Nitride Thin Films Grown by Pulsed Laser Deposition Assisted by Atomic Nitrogen Beam.
|
Recent Advances in Pulsed Laser Deposition of Thin Films
|
Electrochemical Deposition of Barium Titanate Films
|
Fire Retardant Coatings Deposited Using Remote Plasma Polymerization of Organosilicon Monomer
|
Low Pressure Plasma Spray Coatings
|
||||||