ICMCTF2000 Tuesday Afternoon

Missing - Pettit and Meier Invited

Thermal Conductivity of EB-PVD Thermal Barrier Coatings Evaluated by the Steady-State Laser Heat Flux Technique

Development of a Micromechanical Life Prediction Model for Plasma Sprayed Thermal Barrier Coatings

Microstructure of TBCs Grown on Rotating Substrates by EB-PVD

Thermal Fracture of Interfaces in Precracked Thermal Barrier Coatings

Influence of Impurity Content and Porosity of Plasma Sprayed Yttria Stabilised Zirconia Layers on the Sintering Behaviour

Mitigation of Detrimental Sulfur Effects by Platinum Additions to CVD Aluminide Bond Coats

The Reduction of Plasma Sprayed Zirconia

Missing - Invited Hultman

Measurement and Control of Residual Stress in Multi-layer TiN and TiB₂ Films

Mechanical Properties and Thermal Stability of TiN/TiB₂ Nanolayered Thin Films

Hard Nanocomposite Ti-Si-N Coatings Prepared by DC Reactive Magnetron Sputtering

High Temperature Behaviours of Hard 9Ti,Al)N Coatings Deposited in a Cathodic Arc Evaporation Device

Source and Effect of Impurity Incorporation During Thin Film Growth by Physical Vapor Deposition in a High Vacuum Ambient

Plastic Flow and Related Wear Mechanisms of CVD Ceramic Coatings

On the Wear and Failure Mechanisms of PVD TiN/TaN Coated Tools When Milling Austenitic Stainless Steel

Deposition of Si-DLC Films With High Hardness, Low Stress and High Deposition Rate

New Cr-B-N Thin Films Synthesized by Inductively-Coupled-Plasma Assisted Planar Magnetron Sputtering

Thickness Dependence of Optical Properties of Metallic Films

Optical and Structural Properties of Highly C-axis Oriented Aluminum Nitride Prepared by Sputter-deposition in Pure Nitrogen

Investigation of Optical and Structural Properties of Sputter Deposited ZrO₂

Numerical Methods for the Design of Optical Multilayer Coatings with a Special Emphasis on the Manufacturability of the Solutions

In-situ Spectroscopic Ellipsometry and Photometry for Magnetron Sputter Process Control

In sStu Interferometry Measurements Through Transparent Magnetron Sputter Deposited Films : a Powerful Tool for Optical Properties Determination and Process Control

Chrome Nitride Growth via Ellipsometric Process Monitoring and Control

Electron Emission from Nitrogen Doped Diamond Film: Influence of Defects Introduced by the Nitrogen Doping

Optical and Electrical Properties of Amorphous Hydrogeneted Carbon Films: Effect of Nitrogen

Electron Field Emission Property of the Carbon Film from Pyrolysis of Polymer Precursor

Field Emission from Annealed Ta-C Films on Silicon and Ceramic substrates

Electrical Behavior of Diamond Coatings Obtained by Different Deposition Methods

Invited - Missing - Stoner

20-inch Color Field Emission Display Prototype

Erosion Damage and Optical Transmittance of Diamond Films

Durable anti-reflection Coatings for Airborne Diamond Optics

Tribological Properties of Thermal Sprayed Magnéli-Type Coatings with Different Stoichiometries (Ti_nO_2n-1)

Influence of Molybdenum Composition in Chromium Oxide-based Plasma-sprayed Coatings on Their Tribological Behavior

Tribological Properties, Phase Generation and High Temperature Phase Stability of Tungsten- and Vanadium- Oxides Deposited by Reactive MSIP-PVD-Process for Innovative Lubrication Applications

Time Dependent Friction Behavior of Near-Frictionless Carbon (NFC) Coatings

Properties and Tribological Performance of MOCVD Zirconium Carbonitride Films in Comparison with Commercial CVD and PVD Coatings

The New Development of Sputtered Carbon Based Coatings Incorporated with Cr, Ti, B and Nitrogen

Sulfides and Boron Nitride Based Coatings for Applications in Dry Machining

Influence of Soft Coatings on Chip Formation and Cutting Performance

Study on Ion Sulphuration Layer As a New Solid Lubrication Coating on Steels and its Wear Mechanism under Dry Condition

Adhesion of Gold-Chrome Multilayer Films in Hybrid Microcircuits: Techniques for Assessing Thin Film Reliability

Adhesion Strength of Electroplated Copper Films

Influence of Residual Stress Gradients on the Adhesion Strength of Sputtered Hard Coatings

The influence of Er Doping of Al-N Sputtered Coatings on their Mechanical Properties

Multi-pass Sub-critical Load Testing of Titanium Nitride Coatings

Evaluation of the Mechanical Properties and Tribological Behavior of the CrN Coating Deposited on Mild Steel Modified with Electroless Ni Interlayer

Study of Mechanical Behaviour of Thin PVD Coatings Using Several Instrumented Tribometers

Tribological Behavior of Coated 8036 Steel with Ultrahard TiB₂ by Using Pulsed Electrode Surfacing

The Application of Quantitative Modeling Techniques to the Problems of New Business Development: Marketing of New Deposition Technologies

Considerations for Application of Engineered Surfaces in Heavy Duty Equipment

Theory and Practice in Future Industrial Development of PVD Hard Coatings for Modern Machining Applications

Characterisation of Large Area Filtered Arc Deposition Process

Optimization of the Cutting Edge Radius of Multi and Monolayer PVD Coated Inserts in Milling Considering Film Fatigue Failure Mechanisms

Combined Cathodic Arc/Unbalanced Magnetron Grown CrN/NbN Superlattice Coatings for Applications in Cutlery Industry

Dedicated PVD Arc Coatings for Industrial Applications

Synthesis and Characterization of Sol-gel Derived Ferroelectric Thin Films

Challenges in Mass Production of PZT for Non-volatile Memory, Pyroelectric and Piezoelectric Applications

Epitaxial Growth and Characterization of (BaSr)TiO₃ Thin Films for Tunable Microwave Applications

Local Optical Probes of Thin-Film Electro-Optic Materials

Thin Films of Lithium Intercalation Complex Oxides for Cathods