Optical coating (OC) applications represent a multibillion dollar market worldwide; they range from antireflective (AR) coatings found in most optical components and low emissivity windows in buildings and automobiles to narrowband optical interference filters used in telecommunications. As the range of applications of OCs continuously broadens and extremely attractive market opportunities arise, it is becoming increasingly important to develop new nanostructured thin film materials with specific multifunctional properties. Further progress in this fast evolving field is strongly stimulated by a simultaneous action of two forces: a) the “pulling force” represented by the economic, technological and societal needs, including sustainable development, and b) the “pushing force” related to the curiosity-driven nanotechnology combining new design concepts of materials and devices, fabrication processes and innovative characterization tools, where the only limitation frequently appears to be our imagination.

This presentation will describe a h olistic approach to OCs based on a broad and in depth knowledge of the interplay between the design, material, process and performance assessment with respect to specific applications and coating system durability in demanding environments. It will review the progress and future opportunities for the use of discrete, graded, and nanostructurally-controlled architectures benefiting from the nanomaterials’ meta-structures, advanced deposition techniques including high power impulse magnetron sputtering (HiPIMS) and tailored plasma- and ion-surface interactions, as well as complex systems implementing active (smart, tunable) materials.

Tomorrow’s trends will be illustrated by examples from different fields of applications ranging from passive hybrid elastic OC for ophthalmic lenses, hard protective OC for displays, and optical interference filters for gravitational waves detection to active OC and advanced glazings for energy saving using smart windows, active color-shifting security and authentication devices, and smart radiators with self-tuned emissivity for the thermal management in satellites.

Alloying with Al is a common strategy to improve thermal and chemical stability of transition metal nitride (TMN) coatings deposited by magnetron sputtering. The solubility of Al in rock-salt-structure TMNs is, however, limited which presents a great challenge to increase Al concentration substantially, while avoiding precipitation of thermodynamically-favored wurtzite-AlN phase (w-AlN), which is detrimental to mechanical properties.

We present a novel thin film deposition method, which allows for unprecedented control over the phase formation in metastable TMN layers. The technique relies on hybrid high power impulse/dc-magnetron co-sputtering (HIPIMS/DCMS) of elemental targets in Ar/N₂ gas mixture with precise synchronization of the substrate bias pulse to the Al⁺-populated portion of the HIPIMS discharge which is superimposed onto a continuous TM neutral flux supplied from a DCMS-operated target. This results in a separation of film-forming species in time and energy domains and enables us to overcome the limitations of the conventional processing where phase formation is to large extent determined by the high adatom mobility and gas-ion-induced mixing, both taking place at the very surface, which drive the system towards thermodynamic equilibrium.

A new group of thin film metallic glasses have been known to exhibit properties different from conventional crystalline metal films, though their bulk forms are already well-known for properties such as high strength because of their amorphous structure. We successfully fabricated the first-ever metallic glass nanotubes (MGNTs) on Si by a simple lithography and sputter deposition process for very large-scale integration. Like biological nanostructured surfaces, MGNTs show some surprising water repelling and attracting properties. Nanotubes are 500-750 nm tall and 500-750 nm in diameter, shown in Figure 1 [1]. The MGNT surface becomes hydrophobic, repelling water. By heating and cooling the array, water can be repelled and attached to the surface [1]. There are two examples presented in this talk based on modifications of this scheme. First, after modification of biotin, the array acts as a waveguiding layer for an optical sensor. The MGNT sensor waveguide could readily detect the streptavidin by monitoring the shift. The detection limit of the arrays for streptavidin is estimated to be 25 nM, with a detection time of 10 min. Thus, the arrays may be used as a versatile platform for high-sensitive label-free optical biosensing [2]. Second, the array is prepared on a heating device on Si and, with an applied electric voltage to the heating device underneath, the array surface was heated to generate an extending force from these nanochambers so that the array are functioned as biomimetic artificial suckers for thermally adhesion response in biological systems [3].

References

[1] J. K. Chen, W. T. Chen, C. C. Cheng, C. C. Yu and J. P. Chu, Metallic glass nanotube arrays: preparation and surface characterizations, Materials Today, 21 (2018), 178-185.

[2] W. T. Chen⁠, S. S. Li⁠, J. P. Chu⁠, K. C. Feng, J. K. Chen, Fabrication of ordered metallic glass nanotube arrays for label-free biosensing with diffractive reflectance, Biosensors and Bioelectronics, 102 (2018), 129-135.

[3] W. T. Chen, K. Manivannan, C. C. Yu, J. P. Chu and J. K. Chen, Fabrication of an artificial nanosucker device with a large area nanotube array of metallic glass, Nanoscale, 10 (2018) 1366-1375.

In this study, a triple-layered thin film structure was designed and fabricated in order to realize porous and tunable TaOxNy thin films with enhanced biocompatibility and antibacterial behavior. In the design of film structure, the top layer was made of porous and tunable TaOxNy. The porous structure was obtained from TaOxNy-Cu (>50 at.%) thin films deposited by reactive sputtering. After the film was annealed by using RTA (1st annealing), the Cu phase was etched away to form TaOxNy network structure. The bottom layer was TaN-Ag (11 at.%) which is used as a Ag source layer. It also provided toughness and hardness. A thin TaN film was inserted between porous TaOxNy layer and solid TaN-Ag layer, and used as Ag diffusion control layer. The function of this layer was to withstand the 1st annealing, then, during the 2nd annealing, to let certain amount of Ag diffusive to the porous TaOxNy layer, and formed Ag nanoparticles. The films fabricated based on this design were studied systematically on their mechanical properties, Ag particle formation, as well as pore size and morphology. Finally, antibacterial property and biocompatibility of these films were studied in terms of O/N ratio, dealloying process, and Ag diffusion control. The relationships among O/N ratio, Ag nanoparticle formation, porosity, and bio-reactions will be discussed and reported systematically.

Health care-associated infections (HCAIs) are one of the major causes of patient morbidity during hospitalization. Most, if not all, HCAIs are the consequence of proliferation and transmission of pathogenic microorganisms in hospitals, especially in intensive care units. In addition, a range of items and devices, including hospital furniture (bedrails, frames, door handles) are fomites that often have a high load of pathogenic agents.

In a previous study, we developed an electroplated copper-silver alloy as antibacterial coating on stainless steel to minimize adhesion and transfer of pathogenic bacteria on environmental surfaces. We have characterized the electroplated copper-silver alloy in its microstructure, chemical and electrochemical nature and demonstrated a pronounced antibacterial activity.

The purpose of the present study was to evaluate the antibacterial efficacy in a standardized surface adhesion tests against Staphylococcus aureus 8325. We determined the influence of chlorine and phosphorus compounds, well-known complexing agents of copper common in hand sweat and surface detergents, by comparing the antibacterial effect of stainless steel, silver, copper and copper-silver alloy. In presence of phosphates and chlorides, the copper-silver coating showed the highest antimicrobial efficacy followed by copper, compared to stainless steel and silver. In absence of chlorides, there was no statistically significant difference among the different metal surfaces.

We also demonstrated that the antibacterial effect of the copper-silver alloy was considerably reduced if the direct contact between surface and bacteria, but not the passage of ions, was prevented. This suggests that the antibacterial action is mainly due to the so-called contact killing mechanism, which is distinctive of metallic copper, rather than the release of copper ions.

Furthermore, we performed confocal microscopy of bacteria on copper-silver coated surfaces using a modified live/dead staining in order to follow over time the bacterial killing front at the surfaces. This demonstrated, as the assays based on counting, a rapid killing spreading upwards in the bacterial biofilm within 30 minutes.

In conclusion, we believe that the electroplated copper-silver coating can be an effective instrument limiting spread of pathogenic microorganisms causing HCAIs in hospitals and intensive care units.