AVS2016 Session MN-ThP: MEMS/NEMS Poster Session

Thursday, November 10, 2016 6:00 PM in Room Hall D

Thursday Evening

Time Period ThP Sessions | Topic MN Sessions | Time Periods | Topics | AVS2016 Schedule

MN-ThP-1 Method for Patterning Poly-Acrylic Acid Sacrificial Layers for Use in Solder Based Self-Assembly for 3D Integration
Connor Smith, Ying Feng, Susan Burkett (The University of Alabama)

Poly-acrylic acid (PAA) has been shown to be a useful material for both sacrificial layers and patterning in micro-fabrication. This usefulness stems from various critical properties of PAA—particularly its high solubility in water. Due to this, PAA results in a much safer environment as opposed to other materials, such as silicon dioxide, which are traditionally etched using hazardous etchants, such as hydrofluoric acid. However, in certain processes, such as solder based self-assembly for 3D integration, a patterned sacrificial layer is highly desirable. Unfortunately, PAA is not a conducive material for this due to the fact that water is so prevalent in many processes’ post-patterning and pre-sacrificial layer removal steps and, thus, could result in damage to the PAA layer. This research focuses on providing a technique by which PAA can be used as a patterned sacrificial layer in such processes by taking advantage of the ease with which the substance can be thermally cross-linked and the ability to etch such cross-linked PAA using a solution with a significantly high pH level.

MN-ThP-2 An Application of Aligned Electrospun PVDF Nanofibers
Akira Ueda, Omar Ali (Fisk University); Yin Zhang (Vanderbilt University); Bria Storr, April Byrne, Carcia Carson (Fisk University); Claire Marvinney, Andrew Cook (Vanderbilt University); Sergey Avanesyan, Warren Collins, Richard Mu (Fisk University)

We report an application of the aligned electrospun nanofibers of PVDF, poly(vinylidene fluoride). Although the electrospinning is a quite old technique, recently it has been paid attentions in order to fabricate nano-sized materials. PVDF is a piezoelectric and pyroelectric material, and it is recently found to be aligned nanofibers by using a set of grounded electrodes during electrospinnig. By using this delicate material, an application to the molecular sensors will be reported.

Time Period ThP Sessions | Topic MN Sessions | Time Periods | Topics | AVS2016 Schedule