AVS1999 Session EM2-ThA: Silicon Carbide and Dielectrics on Si

Thursday, October 28, 1999 2:00 PM in Room 611
Thursday Afternoon

Time Period ThA Sessions | Abstract Timeline | Topic EM Sessions | Time Periods | Topics | AVS1999 Schedule

Start Invited? Item
2:00 PM Invited EM2-ThA-1 Silicon Carbide: Material of the 21st Century?
P.G. Soukiassian (Université de Paris-Sud/Orsay, France)
Silicon carbide (SiC) is a refractory material belonging, with diamond and nitrides, to the wide band gap semiconductor class. SiC has a strong technological interest especially in high temperature, high speed, high voltage and high power semiconductor devices and sensors. Furthermore, rather inert chemically, its ability to resist to radiation damages makes SiC very suitable for hostile environments. In addition, SiC has very interesting mechanical properties and is one of the best biocompatible material. These exceptional properties are driving forces into the present fast growing interest in surfaces and interfaces of this advanced material. The surfaces and interfaces of cubic and hexagonal SiC are investigated by atom-resolved variable temperature scanning tunneling microscopy and spectroscopy and photoemission spectroscopies using synchrotron radiation.1-3 Such important issues as the atomic scale self-propagated surface oxidation and SiO2/SiC initial interface formation will be addressed.4,5 In addition, the discovery of highly stable self-organized Si and C atomic lines having fascinating characteristics and their dynamics will also be described.6,7 The Si nanostructure number and spacing could be mediated by annealing time and temperature leading to ordering ranging from a single isolated Si atomic line to large superlattices of "massively parallel" atomic chains.6 One discovers also a sp to sp3 temperature-controlled diamond-like transformation which could potentially be usefull in diamond growth.7 All these characteristics are unprecedented and show a very novel and interesting aspect of SiC in its ability to also be a very suitable material in nanoscience.


1
1F. Semond, P. Soukiassian, A. Mayne, G. Dujardin, L.Douillard
2and C. Jaussaud, Phys. Rev. Lett. 77, 2013 (1996).
2P. Soukiassian, F. Semond, L. Douillard, A. Mayne, G. Dujardin,
3L. Pizzagalli and C. Joachim, Phys. Rev. Lett. 78, 907 (1997).
3V.Yu. Aristov, L. Douillard, O. Fauchoux and P. Soukiassian,
4Phys. Rev. Lett. 79, 3700 (1997).
4A. Mayne, F. Semond, G. Dujardin and P. Soukiassian, Phys. Rev.
5B 57, Rap. Comm., R 15108 (1998).
5F. Semond, L. Douillard, P. Soukiassian, D. Dunham, F. Amy and
6S. Rivillon, Appl. Phys. Lett. 68, 2144 (1996).
6P. Soukiassian, F. Semond, A. Mayne and G. Dujardin, Phys. Rev.
7Lett. 79, 2498 (1997).
7V. Derycke, P. Soukiassian, A. Mayne, G. Dujardin and J. Gautier, Phys. Rev. Lett. 81, 5868 (1998).

2:40 PM EM2-ThA-3 Characterization of PECVD SiC and its Application in Advanced Reticle Technology-SCALPEL Membrane
S. Han, W.J. Dauksher, P.J.S. Mangat, K.D. Cummings, S.M. Smith (Motorola, Inc.)
The material which forms thin membrane layer (1000Å) in Scattering with Angular Limitation Projection Electron Beam Lithography (SCALPEL) mask technology should satisfy a handful of rigid requirements such as stress controllability, high mechanical stiffness and good chemical etch resistance for wet processing. We have demonstrated that amorphous PECVD SiC can be an excellent choice of material that satisfies the criteria above. SiC potentially could be a better candidate for the membrane layer than silicon nitride, which is currently recommended. Furthermore, it has the possibility of better membrane yield and improved image placement because the elastic modulus for SiC is almost twice that for silicon nitride. Amorphous SiC films were prepared by PECVD using SiH4 and CH4 chemistries. The as-deposited intrinsic stress can be varied from mid-compressive to weak tensile depending on the deposition conditions. Furthermore, we have shown that the magnitude and sign of the as-deposited stress in the film can be modulated by RTA anneal cycle. Stress level in the films can be modified to our level of interest (about 1e9 dynes/cm2 tensile.) In addition, the etch resistance in KOH etchant, an important criteria, is improved after the post annealing cycle. This is associated with hydrogen evolution during the annealing, which reduces the density of hydrogen bonds with C and Si. Results will include the yield impact of controlling stress on the membrane by deposition conditions or by post annealing. In addition, characterization results of films using FTIR and RBS for hydrogen bonding and atomic ratio, respectively will be included. In summary, this paper addresses comprehensive information on a uniform, low stress PECVD SiC that can be used as a membrane material for SCALPEL mask technology.
3:00 PM EM2-ThA-4 Contact Properties of Cerium Ultrathin Film on SiC
W.J. Lu, D.T. Shi, T. Crenshaw, A. Burger, W.E. Collins (Fisk University)
Cerium (Ce) is well known as an excellent catalyst for NOx conversion in environmental and automobile exhaust gas control. It has a strong adsorption capability for oxygen containing gases. Ce/SiC has a great potential as a chemical sensing materials for NOx which can be operated at high temperature. To the best of our knowledge, the electrical contact properties of Ce/SiC on SiC have not been reported. In this work, the morphology and interfacial composition of Ce ultra-thin films on 6H-SiC and 4H-SiC are investigated after thermal annealing using atomic force microscopy and X-ray photoelectron spectroscopy. The Ce ultra-thin films of about 3 nm thickness are deposited by RF sputtering. The samples are annealed at the evaluated temperatures for 30 minutes in air. The Ce ultra-thin film on 6H-SiC and 4H-SiC has a good uniformity as deposited, and there are no significant morphological changes for both samples after annealing. The Ce on SiC contact is a Schottky contact, and the Schottky barrier heights for Ce/6H-SiC and Ce/4H-SiC as deposited are 1.43 eV and 1.77 eV, respectively. The Ce film is oxidized to be a Ce oxide film after thermal annealing in air. The morphology and the interfacial compositions after annealing will be presented. Key Words: SiC, Ce, AFM, XPS, and Schottky barrier height.
3:20 PM EM2-ThA-5 A Thermodynamic Analysis of Silicide and Carbide Formation and Stability of W, Co, V, and Zr Thin Films on Single-Crystal SiC
W.F. Seng, M.J. Bozack, P.A. Barnes (Auburn University); S.A. Catledge, Y.K. Vohra (University of Alabama at Birmingham)
Electronic devices capable of operation at elevated temperatures require understanding of the chemical reactions which occur at the metal-semiconductor interface. Phases predicted from equilibrium thermodynamics are presented in the forms of both Ellingham and Gibbs ternary diagrams to understand the temperature sequence of silicide and carbide formation and stability of the phases formed at the metal-SiC interface. W, Co, V, and Zr were deposited on single-crystal SiC by electron-beam deposition and annealed to temperatures approaching 1000 C. Resulting phases were identified by AES, XPS, and XRD and compared to the phases predicted by thermodynamic analysis. Limitations of the thermodynamic approach are also discussed.
3:40 PM EM2-ThA-6 Deposition of Yttrium Oxide by Yttrium Sputter/Thermal Oxidation and Reactive Sputtering for Advanced High k Gate Dielectrics
J.J. Chambers, G.N. Parsons (North Carolina State University)
The advent of 50nm MOSFET devices will require an equivalent SiO2 thickness (tox,eq) of 10Å. Direct tunneling through SiO2 becomes problematic below about 15Å. To maintain low tunneling, the gate thickness must be >15Å, which requires an insulator with k>3.9. We form yttrium oxide on Si by: 1) yttrium sputtering followed by thermal oxidation; and 2) reactive sputtering of yttrium. Conditions for the sputter/thermal oxidation process were yttrium sputter in 4.3mTorr Ar at 25°C then ex-situ furnace oxidation in 1 atm N2/O2 at 900°C. Conditions for reactive sputtering of yttrium were 4.3mTorr, 25-500°C and an Ar/N2O flow ratio of 0.5. Infrared absorption peaks from 400-600cm-1 are present in the FTIR transmission spectra of the sputter/thermal oxidation and reactive sputtered films. These peaks are consistent with the 467, 562 and 698cm-1 absorption peaks present in the spectrum of a 99.9% pure Y2O3 standard. CV and IV electrical measurements have been performed on films from both processes. Leakage current at 2V of 0.1µA/cm2 has been measured for sputter/thermal oxidation (tox,eq=50Å) and reactive sputtered (tox,eq=100Å) films. Using optical thickness measured with spectroscopic ellipsometry, effective dielectric constants are approximately 8.0 for films from both processes. Bulk Y2O3 has k=14-17, which suggests that the films described here have a reduced k in their thin film form, some yttrium silicate formation and/or an underlying SiO2 layer. Under some deposition conditions, inert gas annealing increased inversion capacitance in the CV trace, possibly due to interfacial silicide formation. We will discuss the affects of pre-deposition N2 and N2O plasma surface treatments on the electrical properties of these films. The chemical and structural changes upon annealing will be investigated using XPS, AFM and RHEED.
4:00 PM EM2-ThA-7 Bi4Ti3O12 Ferroelectric Thin Films Deposited on Silicon by Pulse Injection Metal-Organic Chemical Vapor Deposition
S.K. Lee, H.J. Kim (Seoul National University, Korea)
Bi4Ti3O12 is one of the well-known bismuth-based layered perovskite materials. This compound has attracted much attention because of its characteristic anisotropic property. Especially, the low coercive field along c-axis, about 3.5 kV/cm, has made Bi4Ti3O12 thin film a very promising gate dielectric for a ferroelectric field effect memory device. For this application, ferroelectric thin film has to be fabricated at low temperature in order to keep the abrupt interface with the semiconductor substrate and the composition of the film has to be uniform. By these requirements, metal-organic chemical vapor deposition (MOCVD) was taken as the fabrication method of Bi4Ti3O12 thin film on p-type (100) silicon substrate. Solid Bi(C6H5)3 and liquid Ti(OC3H7)4 were chosen as precursors of bismuth and titanium, respectively, because of their good stability and complete decomposition ability. However, the great difference in formation kinetics of TiO2 and Bi2O3 made it very difficult to control the Bi4Ti3O12 /Si interface and the film composition. In order to overcome this problem, pulse injection method was introduced, in which input precursors were varied periodically during deposition for compensating the lower reactivity of Bi(C6H5)3 with oxygen. By this pulse injection method, abrupt Bi4Ti3O12 /Si interface was attained and the composition of Bi4Ti3O12 thin film was also very uniform. The properties of Bi4Ti3O12 thin films were strongly dependent on the substrate temperature and pulse injection conditions.
4:20 PM EM2-ThA-8 Film-Formation Mechanisms and Step Coverage of (Ba,Sr)TiO3 Films Grown by MOCVD
Y. Gao, T.T. Tran, S. Thevuthasan, M.H. Engelhard (Pacific Northwest National Laboratory); P. Alluri (Motorola, Inc.)
Isotopic labeling experiments (18O2) have been carried out to understand the film-formation reactions in the MOCVD growth of (Ba,Sr)TiO3 (BST) thin films using Ba(thd)2, Sr(thd)2, and Ti(O-iPr)2(thd)2 as the metalorganic precursors. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) reveals both M18O and M16O (M= Ba, Sr, Ti) in the BST films, indicating that the oxygen in the BST films originates from both the gas phase oxidants (18O), and the precursor ligands (16O). The amount of 18O and 16O in these films was also determined by nuclear reaction analysis (NRA). The results are in agreement with the TOF-SIMS data. Thus, the isotopic labeling study reveals two film-formation reactions: oxidation and thermal decomposition of the precursor molecules during the MOCVD growth. The results show that about two thirds of M-O bonds in the original precursors are preserved in the BST films grown at 650 °C in O2. However, more precursor molecules are oxidized by O2 at 590 °C, indicating that the ligand substitution by O2 plays an important role in the film-formation at lower temperatures. Use of a 50%18O2-50%N216O mixture results in a reduction of 18O incorporation in the BST film, indicative direct involvement of N2O in the film-formation reactions. Addition of N2O in O2 also appears to improve film surface morphology and step coverage. The BST films deposited at 650 °C in the 50%O2-50%N2O mixture exhibit conformal step coverage, excellent crystallinity, and good dielectric properties. The correlation between the film-formation mechanisms, step coverage, crystallinity, and dielectric properties will be discussed in this presentation.
4:40 PM EM2-ThA-9 Anhydrous Zirconium (IV) Nitrate as a CVD Precursor for ZrO2
R. Smith, N. Hoelien, C. Taylor, T. Ma, S. Campbell, W.L. Gladfelter, J.T. Roberts (University of Minnesota); M. Copel, D.A. Buchanan (IBM T.J. Watson Research Center); M. Gribelyuk (IBM)
We report the chemical vapor deposition (CVD) of ZrO2 from the anhydrous metal nitrate, zirconium (IV) nitrate [Zr(NO3)4]. Zirconia films were deposited onto 100-oriented Si substrates using thermal CVD methods. Measurements of the ZrO2 growth kinetics imply an exceedingly low barrier for ZrO2 nucleation on a Si(100) surface, as there was essentially no induction period between the onset of CVD and the achievement of steady-state growth. The films were extensively characterized with respect to their suitability as high dielectric constant materials in advanced microelectronic devices. Ion beam methods (Rutherford backscattering, RBS, and medium energy ion scattering spectroscopy, MEIS) suggested that the films were close to the ideal stoichiometry or slightly oxygen-rich. X-Ray diffraction established that most films were monoclinic ZrO2. Cross-sectional transmission electron microscopy (TEM) and MEIS measurements showed that the Si-ZrO2 interface consists of a 10-15Å thick interlayerof nearly pure SiO2. Finally, electrical characterization measurements established low leakage current densitites across the Si-ZrO2 interface. This study adds to a growing body of work on the usefulness of volatile, anhydrous metal nitrates as precursors for high electrical quality metal oxide materials.
5:00 PM EM2-ThA-10 A New Approach for the Fabrication of Device-Quality Ge/GeO2/SiO2 Interfaces Using Low Temperature Remote Plasma Processing
R.S. Johnson, H. Niimi, G. Lucovsky (North Carolina State University)
It has been shown that low temperature (300°C) remote plasma enhanced processing can separately and independently control interface formation and bulk oxide deposition on silicon substrates. Plasma processing is followed by a low thermal budget thermal anneal, e.g., 30 s at 900°C. This process has been used for the formation of the device-quality gate dielectrics in both NMOS and PMOS devices. In the new results reported in this paper, this process has been modified and applied to germanium substrates to determine if it can provide a successful pathway to device-quality Ge-dielectric interfaces. The new process is similar low temperature (300°C) three-step process consisting of (i) an O2/He plasma-assisted oxidation of the Ge surface to form a superficial germanium-oxide passivating film, (ii) deposition of a SiO2 bulk film by remote plasma-enhanced CVD from SiH4 and O2, and (iii) a post-oxide deposition anneal for chemical and structural relaxation. We track the initial stages of the plasma-assisted oxidation of the germanium substrate using on-line Auger Electron Spectroscopy (AES). We then discuss why the O2 /He plasma oxidation is critical for prevention of "subcutaneous" oxidation of GeO2 -Ge interface during the deposition step. As in the case of Si deives, the oxidation step is required for formation of a device quality interface.
Time Period ThA Sessions | Abstract Timeline | Topic EM Sessions | Time Periods | Topics | AVS1999 Schedule