Harlan™: High Rate-High Density Pulsed Magnetron Sputtering Source for Depositing Metal & Ceramic Coatings for Industrial Applications.

Arc Sources for Low Defect Coatings and High Target Utilization

Cutting Tools in the Era of Industrial Internet of Things and Additive Manufacturing

Overstoichiometric Transition Metal Nitride Films

Introducing of New Hybrid LACS® Technology (Lateral ARC and Central Sputtering by Rotating Cathodes)

Edge-related Effects During Arc-PVD Deposition Processes

Reactive Sputtering for Highly Oriented HfN Film Growth on Si(100) Substrate

Study of Orthorhombic ZnSnN₂ Fabricated using Zn–Sn₃N₄ Composition Spreads through Combinatorial Reactive Sputtering

Angular Resolved Mass-energy Analyses of Species Emitted from a d.c. Magnetron Sputtered NiW-target

Effect Produced by Architecture of Nanolayer Composite Coatings Deposited with Filtered Cathodic Vacuum Arc Deposition (FCVAD) Technology on their Mechanical and Performance Properties

Effects of Nitrogen Flow Rate and Substrate Bias on Structure and Properties of Molybdenum Nitride Thin Film

Transfer of DLC Coating Processes between Different Coating Machines Assisted by Plasma Simulation

Stress-Free ta-C Industrially Deposited by PLD for High Performance Stamping Applications: Results and Challenges of 1st Production Year

Hollow Cathode Discharges for Rapid DLC

Hard Cr-doped DLC Coatings Deposited by Low-frequency HiPIMS with Enhanced Tribomechanical Behavior at High Temperature

Effect of Pulse Shape and Plasma Composition (Ar + Ne) on the Properties of Hard DLC Films Deposited by HiPIMS: Correlation with Substrate Ion Fluxes

The Comparison of Deposition Processes, Composition and Properties of Hydrogenated W-C:H Coatings Prepared by Different Sputtering Techniques

The Mechanism of Graphite Nucleation in Amorphous Carbon Films Deposited with the Condition of Energetic Bombardment and High Temperature

Recent Development of Biocompatible Thin Film Metallic Glass Materials

Antibacterial and Biocompatible Properties of Ga-doped TaON Thin Films

TiO₂ Nanotubes Produced in Aqueous Electrolytes with CMC for Biomaterials Application

Electrochemical Evaluation of Titanium Oxide Coatings Deposited on Magnesium Alloys

Metallization of Polymers for Medical Applications

Characteristics of a Composite Ceramic Coating Fabricated on Mg-1.2Zn-0.5Ca-0.5Mn Alloy Towards Biodegradable Bone Implants

Assessing the Mechanical Properties of Thin Organic Semiconductor Coatings

In Situ TEM Activation Volume Measurements

In-situ Microscale Mechanical Testing of Metal/Ceramic Interfacial Regions

Nano-wedging: A Novel Test Method to Combine Nanoscale Strain Mapping with Multiaxial Stress States

Micromechanical Characterisation of Ag/Au Multilayers by Means of Bulge and Nanoindentation Testing

Size Effect on Superplastic Flow – In situ Micromechanical Characterization of Superplastic Zn-22% Al

Studies on the Mechanisms in Hexagonal Close Packed Metal Nanolaminates

Critical Assessment of the Criteria for Minimum Indentation Spacing

Surface Laboratory Assistant – The New Combination of Measurement Device and Analysis Software

Electro-mechanical Reliability of Flexible Electronics: An Overview of Testing and Characterization Techniques

Bending Fatigue of Al/Mo Bilayers on Polymer Substrates with Varied Al Layer Thickness

Enabling High-Power Flexible Devices through Tailored Nanocomposite Interface Materials

Plasma Polymers…A Family of Materials that is Full of Surprises

Environmental Challenges of Thin Film Systems on Polymer Substrates for Space Applications

Sputtered Thin Film Sensors for Self-sensing Composite Materials

A New Method for Influencing Coating Properties on Polymer Substrates at Low Temperature: High Power Impulse Magnetron Sputtering (HIPIMS) with Positive Voltage Reversal

Tribological Challenges and Surface Engineering Solutions for Extreme Environments and Lightweight Materials